Support Überblick / Home Audio / Receiver / Receiver - Stereo / HK 3480

HK 3480

Stereo Receiver (120 watts x 2)

Verkauft von 2004 bis 2007

Vorgänger-Produkt:	HK 3475
Nachfolgeprodukt:	HK 3485
Hergestellt in:	China

Dokumente & Downloads

Benutzerhandbücher

Produktdetails

Allgemeine Spezifikationen

Power Requirements: AC 120V/60Hz

Power Consumption: 3W standby, 280W maximum (both channels driven)

Digital Inputs (coaxial/optical): None

Analog Inputs: 1 A/V on front panel

Analog Inputs: 3 A/V on rear panel

Analog Inputs: 3 audio-only

Analog Inputs: tuner

On-Screen Display: No

Multizone Capability: Speaker A/B switch

Remote Control: Five-device system remote

Shipping Weight (System, Accessories, Packing): 27.3 lb (12.39kg)

MSRP U.S.: $449.95 each

Audio Spezifikationen

# of Amplifier Channels: 2

Stereo Mode:

Continuous Average Power (FTC) per Channel: 120 Watts per channel, 20Hz – 20kHz @ <0.07% THD, both channels driven into 8 ohms

Continuous Average Power (FTC) per Channel: 150 Watts per channel, 20Hz – 20kHz @ <0.2% THD, both channels driven into 4 ohms

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 95dB (IHF-A)

Frequency Response: 10Hz – 110kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM): Unmeasurable

Rise Time: 16µsec

Slew Rate: 40V/µsec

Abmessungen

Width: 17.4 inches (442mm)

Height: 6.6 inches (168mm)

Depth: 15 inches (382mm)

Weight: 23.0 lb (10.44kg)

Dimensions:

Carton Dimensions: 21.5 inches x 9.9 inches x 17.9 inches (545mm x 251mm x 455mm)

Videospezifikationen

Television Format: NTSC/PAL/SECAM

Signal Format System: Composite

Input Level/Impedance: 1Vp-p/75 ohms, unbalanced

Sync Polarity: Negative

Output Level/Impedance: 1V/75 ohms, unbalanced

Video Frequency Response: 10Hz – 10MHz

Tuner Specifications

Frequency Range: AM... 520 – 1720kHz

Frequency Range: FM... 87.5 – 108MHz

Signal-to-Noise Ratio: AM... >40dB

Usable Sensitivity: FM... IHF 1.12µV/13.5dBf

Signal-to-Noise Ratio: FM... Mono/Stereo 73/72dB

Usable Sensitivity: AM... Loop 500µV/M

Distortion: AM... 1kHz, 50% Mod 0.8%

Distortion: FM... Mono/Stereo 0.3/0.4%

Selectivity: AM... ± 10kHz, >25dB

Stereo Separation: FM... 40dB @ 1kHz

Selectivity: FM... ± 400kHz, 65dB

Image Rejection: FM... >80dB

IF Rejection: FM... >100dB

Tuner Output Level: FM... 1kHz, ±100kHz, Dev 500mV

Amplifier Specifications

Amplifier Power (RMS): 120 x 2 @ 8 ohms, (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)

High Instantaneous Current Capability (HCC): ± 45 Amps

When two channels are all you need, make it two ultrahigh-bandwidth, high-current channels from the company that invented the stereo receiver. The HK 3480 features seven audio inputs, four video inputs (including one on the front panel), 30 AM/FM station presets, VMAx surround synthesis from stereo sources, a three-step dimmable fluorescent display, a phono preamp, pre-out/main-in jacks, gold-plated phono inputs and a separate subwoofer output. Also included is a multicomponent system remote control. Factory remanufactured.