How To

How To

1018 Ergebnisse
  • The Y500 headphones do not support Apt-X audio codec. However, they do support AAC audio codec.
  • Press and hold Volume Up or Volume Down located on the LEFT ear cup for 3 seconds to skip forward or backward.
  • Move the ON/OFF button from its OFF position to its ON position, which is the middle of the cutout. It will remain there, and the headphones are now ON. The blue LED will start blinking, indicating that Bluetooth pairing is possible. If you need to reset the BT pairing, move the ON/OFF button against the spring load, to the opposite position of the OFF position, and keep it there for about 5 seconds. Now the BT system is reset, and new pairing is possible.
  • You can activate the Ambient Aware and TalkThru functions and assign one of them to the smart-button. AA will open the external microphones and mute the music so you can hear what is going on around you. TalkThru permits you to have a conversation with other people in the room, just by pressing the button.
  • You cannot disengage ANC, it is always on when the headphones are on. However, you can listen to music via cable if you do not switch the N700 on at all, which means that ANC will not be active.
  • The memory can support up to 8 paired devices, but only one device can play at a time on the N700NC headphones.
  • When the headphones are charging-Red LED When the headphones are fully charged-The red charging indicator LED turns off When the headphones are looking for a device- Fast blinking blue LED When the headphones are connected to a device-Solid blue LED
  • You can use the headphones while charging but only the wired connection will work. No active functions are available since they cannot be switched on.
  • In order to use the headphones for phone calls, press the multi-button once when the phone rings. You need to be connected to your device via bluetooth.
  • The N700NC does not support Apt-X audio codec.
  • You can create several different EQ settings that are stored in the memory within the new AKG Headphones app.
  • Airplay 2 wird unterstützt
  • Das integrierte Kabel kann nicht ausgetauscht oder abgenommen werden.
    Falls das Kabel beschädigt ist, wenden Sie sich bitte an unseren Kundendienst.
  • Wenn der USB-Anschluss zu feucht wird, stoppt der Ladevorgang, um eine Überhitzung zu vermeiden.

    Wenn der USB-Anschluss an der Box Flüssigkeit erkennt, wird dies an der LED-Leuchtleiste durch einen weißen Blitz angezeigt.

  • Du kannst beim Streamen dein Gerät einfach aufladen, und zwar über den zusätzlichen Anschluss im Dongle.

    Schließe das Ladekabel an, ohne die Aufzeichnung zu unterbrechen. Bitte beachte, dass das Aufladen über den Dongle nicht funktioniert, falls dein Telefon ganz leer ist. Schließe in diesem Fall zuerst das Ladekabel an das Telefon an, um es wieder einzuschalten. Wenn das Telefon eingeschaltet wurde, kannst du den Dongle wieder anschließen und weiter aufladen.

  • Der „Relax Sound“ ist eine Funktion in der JBL Headphones App, mit der du entspannende Geräusche zum Anhören auswählen kannst, wie etwa sanfte Meereswellen oder ein knisterndes Holzfeuer.

    Per Schieberegler stellst du ein, wie viele und wie lange du entspannende Geräusche hören möchtest.

< 1 ... 30 31 32 33 34 35 >

Sie können nicht finden, wonach Sie suchen?

Rufen Sie uns an

Rufen Sie uns an

Rufen Sie uns jetzt unter folgender Nummer an: +43 800 070 667

Montag - Freitag: 09:00-18:00
Samstag - Sonntag: 10:00-16:00

Schreiben Sie uns eine Email

Schreiben Sie uns eine Email

Wir sind Montag-Sonntag für Sie da, um Ihre E-Mail schnellstmöglich zu beantworten.

Schreiben Sie uns eine Email
Chatten Sie mit uns

Chatten Sie mit uns

Montag - Freitag: 09:00-18:00
Samstag - Sonntag: 10:00-16:00

message

WhatsApp uns

Senden Sie uns eine Nachricht hier 

Montag - Freitag: 10.00-17.00
Samstag - Sonntag: 10:00-16:00