How To

Support Überblick / How To

How To

1018 Ergebnisse
  • Alle Ladeoptionen für Ihre Powerbank
    Hier finden Sie alle Möglichkeiten, wie Sie Geräte mit Ihrer Powerbank laden können.
    • InstantGo 5.000 mit integriertem Lightning-Kabel: 1 (1 x integriertes Kabel)
    • InstantGo 5.000 mit integriertem USB-C-Kabel: 2 (1 x integriertes Kabel und 1 x USB-C-Ausgang)
    • InstantGo 5.000 kabellos: 3 (1 x kabellos, 1 x USB-C-Ausgang und 1 x USB-A-Ausgang)
    • InstantGo 10.000 mit integriertem Lightning-Kabel: 2 (1 x integriertes Kabel und 1 x USB-A-Ausgang)
    • InstantGo 10.000 mit integriertem USB-C-Kabel: 3 (1 x integriertes Kabel, 1 x USB-C-Ausgang und 1 x USB-A-Ausgang)
    • InstantGo 10.000 kabellos: 3 (1 x kabellos, 1 x USB-C-Ausgang und 1 x USB-A-Ausgang)
  • Alarm verwendet Weckgeräusch anstelle von DAB/FM-Voreinstellung
    Wenn das Signal des voreingestellten DAB/FM-Senders nicht stark genug ist, ertönt der Alarm stattdessen im Summer-Modus. Stellen Sie sicher, dass das Signal stark genug ist, indem Sie überprüfen, dass der Sender ohne Statik oder Verzerrung spielt (FM).
  • Aktivierung und Deaktivierung des Demonstrations-Modus.

    Demonstrations-Modus

    1. Drücke gleichzeitig die Wiedergabe und Boost-Taste 5 Sekunden lang.
    2. Je nach Status deiner JBL Partybox, gib entweder Demonstrations-Modul ein oder deaktiviere diesen.
      1. HINWEIS: Im Demonstrations-Modus kannst du die JBL Partybox nicht benutzen, da die meisten Funktionen und Tasten nicht funktionieren.
    This image is not available because: You don’t have the privileges to see it, or it has been removed from the system
  • AKG Y500 Headphones: Track Control Information
    In order to skip the tracks on the Y500 headphones, slide and hold Volume Up (to skip forward) or Volume Down (to skip backwards) for 3 seconds. These buttons are located on the LEFT ear cup.
  • AKG Y500 Headphones: Pairing Information
    In order to power on and pair the Y500, make sure that the device you are attempting to connect to has the BT on and is in search mode. Move the ON/OFF button from its OFF position to its ON position, which is the middle of the cutout located on the RIGHT ear cup. It will remain there, and the headphones are now ON. The blue LED will start blinking, indicating that Bluetooth pairing is possible. If you need to reset the BT pairing, move the ON/OFF button against the spring load button to the opposite position of the OFF position, and keep it there for 4- 5 seconds. Now the BT system is reset, and new pairing is possible. Please Note: The Y500 features Multi-point Connectivity which allows you to switch from two different devices.
  • AKG Y500 Headphones: Charging Information
    The Y500 features the speed charge (5 min charging time = 1 Hour Playtime) In order to charge the headphones, use the micro USB charger that is included in the packaging. The charging port is located at the bottom of the RIGHT ear cup. Once the headphones are charging, you will see a solid red light next to the port. Once the headphones are fully charged, the red light indicator will turn off. Please Note: You cannot use the headphones via BT while they are charging. However, you can use the headphones via audio cable while charging.
  • AKG Y500 Headphones: Apt-X Codec Information
    The Y500 headphones do not support Apt-X audio codec. However, they do support AAC audio codec.
  • AKG N700NC Headphones: Track Information
    Press and hold Volume Up or Volume Down located on the LEFT ear cup for 3 seconds to skip forward or backward.
  • AKG N700NC Headphones: Power and Pair Information
    Move the ON/OFF button from its OFF position to its ON position, which is the middle of the cutout. It will remain there, and the headphones are now ON. The blue LED will start blinking, indicating that Bluetooth pairing is possible. If you need to reset the BT pairing, move the ON/OFF button against the spring load, to the opposite position of the OFF position, and keep it there for about 5 seconds. Now the BT system is reset, and new pairing is possible.
  • AKG N700NC Headphones: Noise Canceling Information
    You can activate the Ambient Aware and TalkThru functions and assign one of them to the smart-button. AA will open the external microphones and mute the music so you can hear what is going on around you. TalkThru permits you to have a conversation with other people in the room, just by pressing the button.
  • AKG N700NC Headphones: Noise Canceling Behavior
    You cannot disengage ANC, it is always on when the headphones are on. However, you can listen to music via cable if you do not switch the N700 on at all, which means that ANC will not be active.
  • AKG N700NC Headphones: Multipoint Bluetooth Information
    The memory can support up to 8 paired devices, but only one device can play at a time on the N700NC headphones.
< 1 ... 80 81 82 83 84 85 >

Sie können nicht finden, wonach Sie suchen?

Rufen Sie uns an

Rufen Sie uns an

Rufen Sie uns jetzt unter folgender Nummer an: +43 800 070 667

Montag - Freitag: 09:00-18:00
Samstag - Sonntag: 10:00-16:00

Schreiben Sie uns eine Email

Schreiben Sie uns eine Email

Wir sind Montag-Sonntag für Sie da, um Ihre E-Mail schnellstmöglich zu beantworten.

Schreiben Sie uns eine Email
Chatten Sie mit uns

Chatten Sie mit uns

Montag - Freitag: 09:00-18:00
Samstag - Sonntag: 10:00-16:00

message

WhatsApp uns

Senden Sie uns eine Nachricht hier 

Montag - Freitag: 10.00-17.00
Samstag - Sonntag: 10:00-16:00