Support Überblick / Revel / Amplifiers / SA1000

SA1000

8 Ohms per speaker output

Dokumente & Downloads

Benutzerhandbücher

Anderes

Produktdetails

Allgemeine Spezifikationen

Rated Output Power (RMS) into the minimum impedance of 4 ohms: 700 Watts (350W per Subwoofer)

Peak Power: 1500 Watts (750W per Subwoofer)

Rated Impedance: 8 Ohms per speaker output

Minimum Load Impedance: 4 Ohm

Model-Specific EQ 1: Only for Revel B28C; 2

Input Sensitivity to 1W @ 50HZ: 16.3mVrms +/- 1dB (Single input driven) Gain = 41.7dB

Input Overload (Both Inputs Driven): 2.0Vrms

Input Impedance: >10K Ohms

Low Pass Crossover Range: 50-150Hz

Auto Turn On Input Sensitivity @ 50Hz: Typical 10mV

THD+N At 1W: <0.3%

THD+N At Rated Output Power: <1%

Signal-to-Noise Ratio To 1W: >65dBA

Minimum AC Mains Power Requirements Model: 700W, 5A – 100-120VAC-50-60Hz

Minimum AC Mains Power Requirements Model: 700W, 3A – 230VAC-50-60Hz

Power Consumption (Standby): 0.5W

Height: 3.50in (88.90mm)

Width: 17in (431.8mm)

Depth: 11.04in (280.3mm)

Weight: 14 lb (6.35kg)

Audio Spezifikationen

Rated Output Power (RMS) into the minimum impedance of 4 ohms: 700 Watts (350W per Subwoofer)

Peak Power: 1500 Watts (750W per Subwoofer)

Rated Impedance: 8 Ohms per speaker output

Minimum Load Impedance: 4 Ohm

Model-Specific EQ 1: Only for Revel B28C; 2

Input Sensitivity to 1W @ 50HZ: 16.3mVrms +/- 1dB (Single input driven) Gain = 41.7dB

Input Overload (Both Inputs Driven): 2.0Vrms

Input Impedance: >10K Ohms

Low Pass Crossover Range: 50-150Hz

Auto Turn On Input Sensitivity @ 50Hz: Typical 10mV

THD+N At 1W: <0.3%

THD+N At Rated Output Power: <1%

Signal-to-Noise Ratio To 1W: >65dBA

Minimum AC Mains Power Requirements Model: 700W, 5A – 100-120VAC-50-60Hz

Minimum AC Mains Power Requirements Model: 700W, 3A – 230VAC-50-60Hz

Power Consumption (Standby): 0.5W

Height: 3.50in (88.90mm)

Width: 17in (431.8mm)

Depth: 11.04in (280.3mm)

Weight: 14 lb (6.35kg)

SA1000

The SA1000 is a custom amplifier solution, optimized for the highest level of performance and reliability. This rackmount amplifier includes user features on the front panel, and a custom installer focused feature set on the rear panel. As part of Revel's in-wall subwoofer system, this rack mountable Class D component is designed to power the B28W in-wall subwoofer. The SA1000 single channel, rack mount amplifier has two outputs in parallel, so you can power one B28W subwoofer module with 350W RMS (750W Peak). When a second B28W subwoofer module is connected to the second output of the SA1000 amplifier, the total output power increases to 700W RMS (1500W Peak). This complete in-wall subwoofer solution with external rack mountable amplifier is designed to complement Revel’s high-performance architectural product portfolio. It delivers dynamic bass and lifelike realism to concealed music and home cinema systems resulting from Revel’s advanced engineering prowess, and comprehensive subjective and objective measuring tests.