Documents & Downloads
Product Specifications
- Amplifier Power (RMS)
- 18W min./ch, both ch driven @ 8 ohms (50Hz – 20kHz < 0.8%THD)
- Amplifier Power (RMS)
- 22W/ch, both driven @ 8 ohms (1kHz < than 0.8% THD)
- Power Bandwidth
- 25Hz – 20kHz @ < 1% THD @ 8 ohms both channels driven simultaneously @ 9 watts
- Frequency Response
- 20Hz – 20kHz @ < 0.5% THD @ 8 ohms both channels driven siultaneously @ 1 watt
- Rise Time
- SQUARE WAVE – Better than 5 microseconds
- Total Harmonic Distortion
- <0.8%THD from 250 milliwatts-18WRMS, both channels driven @ 8 ohms from 50Hz – 20kHz
- Transient Intermodulation Distortion (TIM)
- < 0.5% @ rated output power
- Hum and Noise
- better than 75dB below rated output
- Hum and Noise
- PHONO – 60dB below rated output
- Damping Factor
- 30...1
- Tone Controls
- BASS – ± 12dB @ 50Hz
- Tone Controls
- TREBLE – ±12dB @ 10kHz
- Phono Input Sensitivity
- 3.3mV
- Phono Overload
- 70mV
- Input Impedance
- PHONO -20k ohms
- Loudness Control
- ±10dB @ 50Hz, 40dB below full output
- MSRP U.S.
- $219.95 each
- Sensitivity
- FM – 2.5 microvolts IHF
- Sensitivity
- AM – 350 microvolt/meter
- Signal-to-Noise Ratio
- 60dB
- Capture Ratio
- FM... 3dB
- Image Rejection
- 40dB -40dB
- Spurious Response Rejection
- 60dB
- De-emphasis
- 75 microseconds ±1.5dB
- IF Rejection
- 60dB -70dB
- AM Rejection
- FM... 50dB
- Multiplex Separation
- 25dB @ 1kHz
- Total Harmonic Distortion
- MONO – 1%
- Total Harmonic Distortion
- STEREO -1.5%
- Alternate Channel Selectivity
- 50dB
- Antenna Terminals
- 300 ohms
- Selectivity
- 50dB (at ±400kHz)
Images & Videos
Can’t find what you’re looking for?
Chat with Us
Mon-Fri 8:00 AM to 5:00 PM (AEST)