How To
How To
670 results
-
As with all in-ear headphones, our range of TWS headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds and your ears. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing.
If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). The should remove the wax and resolve the volume/balance issues.
Was this helpful? Thank you for your feedback! -
Yes, it's 14 hrs with RGB off. You can also find the details on the box. Was this helpful? Thank you for your feedback! -
To configure the 7.1 Surround feature on your PC, please follow the guide below:
1. In the left corner on your screen right next to the Windows logo, click on the spy-glass to start a search on your PC.
2. Type in Sound --> then select Change System Sounds:
3. Make sure that your the Quantum Headphones is your Default Device for both Speakers ( Game ) and Earphone ( Communication device )
4. To configure the 7.1 Surround feature, right click on the Speakers --> then select Configure Speakers
5. Select 7.1 Surround and click on Next
6. Make sure that all boxes are selected, then click Next
7. Make sure both boxes are selected, and then click Next
8. Click on Finish. Now your Quantum headphones is configured for 7.1 Surround sound. The configuration will remain after rebooting PC or reconnecting headphones.
Enjoy your sound experience #SoundIsSurvival #DareToListen
Was this helpful? Thank you for your feedback! -
You can create several different EQ settings that are stored in the memory within the new AKG Headphones app.Was this helpful? Thank you for your feedback!
-
The N700NC does not support Apt-X audio codec.Was this helpful? Thank you for your feedback!
-
In order to use the headphones for phone calls, press the multi-button once when the phone rings. You need to be connected to your device via bluetooth.Was this helpful? Thank you for your feedback!
-
You can use the headphones while charging but only the wired connection will work. No active functions are available since they cannot be switched on.Was this helpful? Thank you for your feedback!
-
When the headphones are charging-Red LED When the headphones are fully charged-The red charging indicator LED turns off When the headphones are looking for a device- Fast blinking blue LED When the headphones are connected to a device-Solid blue LEDWas this helpful? Thank you for your feedback!
-
The memory can support up to 8 paired devices, but only one device can play at a time on the N700NC headphones.Was this helpful? Thank you for your feedback!
-
You cannot disengage ANC, it is always on when the headphones are on. However, you can listen to music via cable if you do not switch the N700 on at all, which means that ANC will not be active.Was this helpful? Thank you for your feedback!
-
You can activate the Ambient Aware and TalkThru functions and assign one of them to the smart-button. AA will open the external microphones and mute the music so you can hear what is going on around you. TalkThru permits you to have a conversation with other people in the room, just by pressing the button.Was this helpful? Thank you for your feedback!
-
Move the ON/OFF button from its OFF position to its ON position, which is the middle of the cutout. It will remain there, and the headphones are now ON. The blue LED will start blinking, indicating that Bluetooth pairing is possible. If you need to reset the BT pairing, move the ON/OFF button against the spring load, to the opposite position of the OFF position, and keep it there for about 5 seconds. Now the BT system is reset, and new pairing is possible.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with Us
Mon-Fri 8:00 AM to 5:00 PM (AEST)
