How To
How To
670 results
-
While you have an incoming call, and you can hear the call-tone from your SoundGear, simply adjust the SoundGear's call-tone level to the desired intensity, using the SoundGear's volume buttons.Was this helpful? Thank you for your feedback!
-
You can't use standard rechargeable batteries with the K912. If you still have the original batteries, and compare them to the generic batteries you are trying to use, you will see the difference on the - ( minus ) side of the battery. On the original battery that comes with the headphones, there is a bare metal band on that side, which connects to a sensor in the headphones ( you can also see this sensor inside the battery compartment, on the - side ). A generic rechargeable battery does not have this metal band for the sensor, so the charger won't charge them. This is for protection, in case you have non-rechargeable batteries in the headphones and put them on the charger. This could cause damage to the headphones.Was this helpful? Thank you for your feedback!
-
Yes, the N40 is equipped with three different sound filters to provide you with personalized sound tuning capabilities. The sound filter options are bass boost, reference sound and high boost.Was this helpful? Thank you for your feedback!
-
No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL ConnectWas this helpful? Thank you for your feedback!
-
No. The two Soundgears can connect to the BTA, but not to each other. Also, when using one Soundgear, the use of aptxLL may result in a delay. If you are connected to two, the delay may be more noticeable, since LL is no longer active.Was this helpful? Thank you for your feedback!
-
No, it's not possible to connect simultaneously from multiple devices to the Flip 3 SE. If you need a new device to pair with the Flip 3 SE, please press the Bluetooth button the Flip 3 SE to enable pairing mode. The Flip 3 SE should be available in the list of Bluetooth devices on your mobile phone/tabletWas this helpful? Thank you for your feedback!
-
Yes, Control Xstream uses both 2.4 GHz and 5 GHZ wi-fi networks.Was this helpful? Thank you for your feedback!
-
No, Soundgear is wireless Bluetooth only, and needs to be charged to play music. But the BTA 20 transmitter must of course be connected with a cable to the signal source.Was this helpful? Thank you for your feedback!
-
To pair and connect to a different device, press and hold the bluetooth button located on the bottom of the right ear cup until you hear the audible voice stating "looking for device." Make sure the the device you are trying to connect to are in search mode. The headphones should display on "Discoverable Devices" within 2-3 seconds. Choose the Pair option and you should hear the audible voice state "connected" and the LED light should transition into a slow blinking blue light.Was this helpful? Thank you for your feedback!
-
Yes, these headphones can be connected and paired to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes. The E65BTNC headphones have the ability to pair and connect to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes. The JBL DUETNC headphones have the ability to pair and connect to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes, with OMNI+ you can add speakers to both bands, but your smart device is not required to be on the same band, just be sure they are on the same network.Was this helpful? Thank you for your feedback!
-
Not yet, because this feature is not implemented in our system. We are working on future updates to add the functionality that will make Harman Kardon Allure work in a Multi-room environment.Was this helpful? Thank you for your feedback!
-
Yes!
By using the JBL ONE app, you can change the equalization settings of the soundbar to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:- BASS: Adjust the lower frequency sounds, such as bass or a kick drum.
- MID: Adjust the mid-frequency sounds, such as human speech.
- TREBLE: Adjust the higher frequency sounds for clarity.
Was this helpful? Thank you for your feedback! -
Yes, the JBL Playlist can be reset to factory settings. First, Power ON the JBL Playlist. Secondly, press and hold the Play and Volume (-) buttons simultaneously for about 10 seconds, and after 10 seconds you should see the Play/Pause and Bluetooth button light up, followed by the speaker going into Standby. Once you see the speaker powers back ON, reset is complete.Was this helpful? Thank you for your feedback!
-
Please note that although the Control Xstream does have a threaded insert for brackets, JBL offers no brackets. Custom made wallmounts should be used.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
No, this feature is not supported in our Harman Kardon Allure speaker. This might change with future updates. You can call your Amazon friends by using the Alexa app.Was this helpful? Thank you for your feedback!
-
Yes, these headphones can be connected and paired to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes. Out-the-box the JBL Bar series soundbar recognizes volume and mute controls from the most common TV remote controls. The JBL Bar series has IR learning. You can use this feature to teach the soundbar to response to your TV's remote control as well.Was this helpful? Thank you for your feedback!
-
Yes, the smooth leather headband from the K601 can be fitted onto the K701, but since it is probably no longer available as a spare part, the only option is to butcher an old 601 to do it. The work involved is very intricate and complicated, and paying a technician to do it is not an economical solution. Owner must be capable of completely dismantling the headphones, including soldering, and to reassemble them. And Harman cannot offer any assistance in doing this. As of late 2017, a new version of K701 is being marketed by AKG Professional. This version features a smooth headband instead of the version with bumps, so the issue no longer applies.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with Us
Mon-Fri 8:00 AM to 5:00 PM (AEST)