How To

Support Overview / How To

How To

670 results

Sort

Page size

The recommended operating temperature for Chargers

For InfinityLab charger, the recommended operating temperature is between 0-45°C.
Our chargers provide auto protection against overheating as well as overcurrent/overvoltage conditions.
Therefore, when the operating temperature is outside the range, this charger will auto adjust the output powers to protect itself and your devices.

Was this helpful? Thank you for your feedback!
There is an upgrade socket on the back panel. How is this socket used, and which kind of cable must I buy to use it?

Although the owner's manual states that owner can use this connector for home upgrade procedure, this is not so. The USB-connector used cannot be bought in commercially available cables, and the port must be considered for technician's use only.

Was this helpful? Thank you for your feedback!
There is no sound from my soundbar. How do I fix it?

Common fixes:
(1) Make sure that the soundbar is not muted.
(2) Select the correct audio input source on the remote control.
(3) Check the connections to your TV or other devices
(4) Perform a reset if none of the above is working.
(4.1) Press and hold VOL -, VOL +, and Source buttons to perform a reset.

Was this helpful? Thank you for your feedback!
The setup process fails with a device running Android 7.0 or higher for my OMNI+ speaker, how can I make it connect?

If you experience a problem with setup using an Android 7.0 or higher device, please perform the following steps: First, force stop the HK Controller app from running in background. Second, go to your phone or tablet Wi-Fi settings, find the Omni speaker setup Wi-Fi network, and select “Forget Network”.Third, reopen the HK Controller app and begin the setup process again. After performing these steps, you will be able to complete the setup process for your speakers.

Was this helpful? Thank you for your feedback!
The top capacitive buttons are sensitive and cause lots of miss-triggering, what can I do?

When you press the power button you will hear a “door locked” tone. This means the top capacitive touch buttons have been locked. At this point you cannot trigger them. With another short press of the power button, you will hear a “door unlocked” tone, which means the top capacitive touch buttons have been unlocked.

Was this helpful? Thank you for your feedback!
The volume level on my headphones is very quiet

If your volume level is quiet, make sure that the TalkThru is not activated on your headphones. In order to deactivate or activate TalkThru, quickly press the ANC button located at the top of the LEFT ear cup. You will hear an audible voice stating, TalkThru On when activated, and 'ANC On' when deactivated.

Was this helpful? Thank you for your feedback!
The Wireless charging speed

The InifilityLab power bank is Qi-certified for a maximum of 10W of Qi wireless charging.
Your device should support Qi charging, and the actual wireless charging speed may vary depending on the device.

For example, iPhone 11 Pro supports Max 7.5W Qi charging, and Samsung Galaxy S21 supports Max 15W QI charging.

Check your device details to know how much power it can receive.

Was this helpful? Thank you for your feedback!
Track Control

To pause/play music, tap center button on right or left ear for 1 second. To skip tracks forward, DOUBLE CLICK the center button on right or left ear. Unfortunately, you cannot skip tracks backward.

Was this helpful? Thank you for your feedback!
Track Control Information

To skip tracks forward, double click the PAUSE/PLAY to advance to the next track. Please note: You can only skip tracks forward. This speaker does not have the capability to skip to the previous track.

Was this helpful? Thank you for your feedback!
TUNE-FLEX: Does the number mean different levels of ANC Tuning?

Numbers 1-6 do NOT relate to ANC level, but you can find the optimal performance for your ears by selecting one of the bubbles.

Was this helpful? Thank you for your feedback!
TWS Mode Capabilities and Restrictions

You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710. It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300. If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers. If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker. Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.

Was this helpful? Thank you for your feedback!
UA Flash: Ambient Aware Technology

To activate Ambient Aware DOUBLE CLICK the center button located on the LEFT ear. You should hear the music level drop. To resume to normal music level, DOUBLE CLICK the center button on LEFT ear again.

Was this helpful? Thank you for your feedback!