How To

Support Overview / How To

How To

670 results
  • UA Flash: Reset Procedure
    To reset, Long press the (Right) button for 2s when the earbuds in the case, the blue LED will flash once to indicate reset is done.
  • UA Flash: Voice Assistant
    To activate Voice Assistant, press and hold the LEFT ear for 5 seconds until music stops and voice assistance asks what they can help you with
  • UA Pivot Headphones: Ambient Aware Technology Information
    AmbientAware Technology allows you to hear your surroundings without removing your UA Pivot headphones. To activate AmbientAware mode, double press the Bionic Hearing button on the controller. You will hear a tone, and your music level will lower when AmbientAware Technology is engaged. To revert back to normal volume, simply double press the Bionic Hearing button again.
  • UA Pivot Headphones: AptX Support Information
    The UA Pivot headphones do not support AptX™ and AptX HD™ audio codecs.
  • UA Pivot Headphones: Call Information
    To receive a call, press the power/pairing button on the controller for 1 second.
  • UA Pivot Headphones: Charging Information
    As the headphones are charging, you will see a red solid light indicator on the controller. Once the unit is fully charged, the red light will turn off.
  • UA Pivot Headphones: Fit and Sizing Information
    The UA Pivot headphones comes with 3 different ear tips and enhancers to ensure the best fit!
  • UA Pivot Headphones: Playback Time Information
    From a full charge, you can expect up to 9 hours of playback time.
  • UA Pivot Headphones: Power On and Pair Information
    Locate the power button on the controller. Hold the power button up for 2-3 seconds and release. Once turned on, it will display a solid blue light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue and red light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.
  • UA Pivot Headphones: TalkThru Technology Information
    TalkThru Technology allows you to clearly hear others for quick conversations without removing your UA Pivot headphones. To activate TalkThru mode, press the Bionic Hearing button on the controller once. You will hear a tone, and your music level will lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the Bionic Hearing button again.
  • UA Pivot Headphones: Track Control
    To skip tracks forward, press and hold the volume + for 2 seconds. To skip tracks backward, press and hold the volume - for 2 seconds. To pause/play the track, press the center button for 2 seconds.
  • UA Pivot Headphones: Volume Control Information
    You will be able to control the volume by pressing the volume + and volume- buttons located on the controller.
  • UA Pivot Headphones: Waterproof Information
    Yes. The UA React features an IPX7 rating which offers full protection from sweat and water. They can be fully submerged for up to 30 minutes.
  • UA React Headphones: Ambient Aware Technology Information
    AmbientAware Technology allows you to hear your surroundings without removing your UA React headphones. To activate AmbientAware mode, double press the Bionic Hearing button on the controller. You will hear a tone, and your music level will lower when AmbientAware Technology is engaged. To revert back to normal volume, simply double press the Bionic Hearing button again.
  • UA React Headphones: AptX Support Information
    The UA React headphones do not support AptX™ and AptX HD™ audio codecs.
  • UA React Headphones: Call Information
    To receive a call, press the power/pairing button on the controller for 1 second.
  • UA React Headphones: Charging Information
    As the headphones are charging, you will see a red solid light indicator on the controller. Once the unit is fully charged, the red light will turn off.
  • UA React Headphones: Fit and Sizing Information
    The UA React headphones comes with 3 different ear tips and enhancers to ensure the best fit!
  • UA React Headphones: TalkThru Technology Information
    TalkThru Technology allows you to clearly hear others for quick conversations without removing your UA React headphones. To activate TalkThru mode, press the Bionic Hearing button on the controller once. You will hear a tone, and your music level will lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the Bionic Hearing button again.
  • UA React Headphones: Volume Control Information
    You will be able to control the volume by pressing the volume + and volume- buttons located on the controller.
  • UA React Headphones: Waterproof Information
    Yes. The UA React features an IPX7 rating which offers full protection from sweat and water. They can be fully submerged for up to 30 minutes.
  • UA Sport Flex Headphones: Battery Life
    The headphones feature a Speed Charge battery which allows you to receive a full hour of playback time after only charging the headphones for 5 minutes. To receive the full 12 hours of audio playback, it typically takes 1.5 hours of charging time.
  • UA Sport Flex Headphones: Pairing Information
    Press and hold the circle power button for 3-5 seconds. This will be located on the LEFT arm of the neckband. We recommend having one or both ear tips in your ear to listen to the audio commands. Continue to press and hold until you hear the audible voice stating, “powering on.” If this is your first time powering on the headphones it will automatically go into pairing mode in which you will hear the audio voice prompt stating “looking for device”. Make sure that the device you are attempting to connect to is in the Bluetooth search mode and within range. UA | JBL Flex should appear on your device within 3-8 seconds. Once you choose this option on your discoverable devices, it will connect and the voice prompt will state “Connected. “ To power off the headphones, press and hold the circle power button for 2-3 seconds or until you hear the audible voice state, “Powering Off”
  • UA Sport Flex Headphones: Track Information
    To skip the track forward, press and hold the volume up button. (+) If you want to skip backward, press and hold the volume down (-) The volume buttons are located on the RIGHT arm of the neckband.
  • UA Train Headphones: Call Information
    To receive a call, press the center button located in between the volume- and volume+ button for 1 second.
  • UA Train Headphones: Charging Information
    To use the headphones, they cannot be charging. You should receive 16 hours of battery life. The UA Train also features the quick charge battery which allows you to receive 1 hour of battery life after charging for 5 min.
  • UA Train Headphones: Ear Pad Information
    Yes, The UA Train ear cushions can be removed and washed. To remove the ear cushions, peel cushion away from ear cup center. Hand wash the ear cushions only with liquid soap for 5 minutes. Swish in soapy water, then swish through clean water until there are no more soap suds. Wait for ear cushions to fully dry, and gently stretch the cushion, inserting the cushion ring into the ear cup slot, and working your way around. Rotate until the L or R indicator is in the correct position.
  • UA Train Headphones: TalkThru Technology
    Talk Thru technology allows you to clearly hear others for quick conversations without removing your UA Train headphones. To activate TalkThru mode, press the UA logo on the RIGHT ear for 1 second. You will hear your music level lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the UA logo again. (Please note TalkThru does not function when using cable connection.)
  • Unit does not power up when power button is pressed?
    Press and hold the power button for 3-5 seconds, it will power on/off the TRIP. Short press on the power button will lock and unlock top capacities touch buttons on the TRIP. Be sure to hold the button for 3-5 seconds to ensure you are powering on/off and not controlling the touch buttons.
  • USB connection with Quantum Duo and headphones
    Please avoid the use of USB splitters and extenders built into screens etc. Dropouts in sound and lack of signal from the microphone in headsets may be the result. If possible, always connect directly to the computer, or use a single extension cord.
  • Using InfinityLab Power bank as a carry-on item during flights
    Normally, batteries under 100Wh (Watt-hour) can be carried on the plane during flights.
    InfinityLab 5.000 power bank is 18.65Wh (Watt-hour), and the 10.000 power bank is 38.5Wh (Watt-hour), which should be allowed as a carry-on item.

    We advise you to consult the flight company if you are in doubt before using it as a carry-on item.
     
  • Using InfinityLab power bank under cold environments
    The InfinityLab power bank will have lower charging efficiency under cold or freezing environments (below 5 degrees Celcius). Therefore, you will feel it’s charging slowly.

    However, when you return to normal temperature (below 35 degrees Celsius), the InfinityLab power bank’s charging efficiency will be back to normal.
  • Using other USB Cables with our InfinityLab devices
    Yes, you can charge your devices with common USB-A and USB-C cables.
  • Using Quantum DUO with our QuantumENGINE software
    Unfortunately, our JBL Quantum DUO speakers are not supported by our QuantumENGINE PC software.
    All configuration is done on the speakers itself, and there is no need or required software to change the RGB lights.
  • Using the USB Connection
    The USB port is only for charging the JBL Quantum 350 Wireless.
    Connect the dongle to use the 2.4GHz wireless connection.
  • Voice Assist Information
    To activate the voice assistance, press and hold the center button on the RIGHT ear for 2 seconds until you hear your music stop. You will be able to speak to VA through your headphones and it should comply with your command.
     
  • Voice commands that I registered are not triggering Smartbase.
    • Voice commands only work when receiving a call. • Excessive background noise such as wind or music, could be impacting unit’s effectiveness. Close windows and or reduce the volume of your music and try again.
  • Waterproof Information (IPX7)

    This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png
  • What's in the box
    Your JBL Quantum 100 includes the headset, a detachable microphone, QSG l Warranty Card l Warning Card, and a microphone windshield.
  • What's in the box? 

    Your JBL Quantum 200 includes the headset, a PC audio splitter, QSG l Warranty Card l Warning Card, and a microphone windshield.

  • What activities does Vi help you train for?
    Vi currently includes support for indoor/outdoor Walking, Jogging, Running, Sprinting, HIIT Runs and Cycling. Our supported activities will continue expanding every few months.
  • What are the benefits of having the soundbar connected to WiFi?
    You are able to enjoy wireless streaming via Chromecast and Airplay from your devices. This will also give you the opportunity to do multi-room playback. At the same time, the product will be able to automatically update, when there is software improvements available.
  • What are the details for HDCP 2.2?
    HDCP (High Definition Copy Protection) 2.2 will become mandatory for 4K/UHD content only. First source should be the 4K BD player announced at IFA for spring 2016 from Samsung. In case of HDCP 2.2, the whole chain needs to be compatible to work from source to AVR to TV. If one of the devices in the chain is not HDCP 2.2-compliant, the player will downscale the content to 1080p. No black screen. This is the theory, anyway. HDCP 2.2 is copy-protection, so it does not decode the signal, but is concerned with preserving the content from being copied and distributed on the internet. The problem of HDCP 2.2 is that it is hardware-based, and not software-based, so there is nothing we can do on our existing models, like any other AVR manufacturer or TV. Please note that self-produced 4K material is no problem, since self-produced material has no digital HDCP copy protection. Only streamed material and UHD-Blu-ray will not work, since the HDCP protection will stop the signal in the receiver.
  • What are the differences between BAR 2.1 and BAR 2.1 Deep-Bass
    In case you wonder what the differences are between JBL BAR 2.1 and JBL BAR 2.1 Deep Bass, the newest model, then keep reading to find out more!
    Our JBL BAR 2.1 Deep Bass is an improvement to the BAR 2.1.

    Here is what you will get extra:
    1. Improved sound quality.
    2. Deeper and richer bass.
    3. A new modern design change.
    It may not be compelling enough for you to buy it or upgrade your device. However, if you are upgrading, then adding the JBL BAR 2.1 Deep Bass won't disappoint you at all!
  • What are the key differences between the Bar 2.1 and 3.1?
    The JBL Bar 2.1 has a 6.5" subwoofer, whereas the Bar 3.1 has a 10" subwoofer. The Bar 3.1 has two additional HDMI inputs, support 4K, and has a dedicated tweeter and two woofers to function as the center channel. These added features makes the JBL Bar 3.1 more efficient at producing bass, connecting multiple sources, playing Ultra HD content, and listening to voice/vocals.
  • What are the requirements for using Harman Kardon Allure speaker?
    There are a couple of things that you will need to install your Harman Kardon Allure speaker. 1. Amazon account (US, UK or Germany are the only ones supported now). 2. An Android device (Android 6.x and up) or Apple device (iOS 9.3 and up). 3. A Wi-Fi network with UPnP enabled. 4. Our HK Alexa setup app from the App store. If you have met all the criteria for installing your new Harman Kardon Allure speaker, then you are ready to enjoy a voice-activated speaker and great music!
  • What are the sound modes on the JBL Bar Studio, Bar 2.1, Bar 3.1, and Bar 5.1?
    There are 5 sound modes: - Standard - Movie - Music - Voice - Sports Out the box, "Standard" sound mode is the default setting. The display on the soundbar's front panel will show which mode you are in (excluding the Bar Studio) Dotted LED lights on the side of the JBL Studio indicates when sound more your are in, the patterns are as follows: - Standard: One LED dot - Movie: Two LED dots - Music: Three LED dots - Voice: Four LED dots - Sports: Five LED dots
  • What are the two openings at the back of the Soundgear used for?
    These are bass tuning canals, used to provide full sound.
  • What are the two signal cables that are in the SOHO II NC box meant for? One has silver-colored plug, the other one has black-colored plug.
    The silver cable is intended for use with Apple sources. The black cable is intended for use with Android/universal sources.
  • What audio codec does the JBL Dive Support?
    The Endurance Dive supports SBC. But the main signal transfer is A2DP, v1.3.
  • What can I do with the Amazon Alexa app for my Harman Kardon Allure/portable speaker?
    There are tons of features that you can use with your Harman Kardon Allure spaeker and Alexa app. We advise going to Amazon's own webpage for more assistance with the Alexa app and what you can do with it. https://www.amazon.com/gp/help/customer/display.html?nodeId=201602230
  • What can I do with the Connect app?
    It is possible to rename the Bluetooth name of the primary connected device and set the Party or Stereo mode. If a firmware upgrade is available for any Connect, Connect+, or Partyboost compatible speaker, this can be installed through the JBL Portable app. Only identical products can be set to stereo mode. Please note that, even though you can pair a Boost TV with JBL Connect, you cannot control this from the JBL Connect App
  • What can you do with JBL QuantumENGINE software?
    You can adjust equalizer, RGB LED effects, change microphone settings and update the headset's firmware.
  • What devices are compatible with the N20LT headphones?
    Because the headphone features a lightning connector, it is compatible with IOS devices only.
  • What does the Audio Sync function do?
    Sometimes, when the soundbar is connected to a digital TV, the audio may not synchronize with the video. If the video is behind the audio, adjust the audio delay time to match the video.
    You can set the audio delay time between 0 msec and 250 msec.
    Note: The audio delay time you specify may not be exact, depending on the played content.
    The audio sync function will not resolve instances where the video is ahead of the audio.
  • What does the Moment button do?
    It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
    Once set up, you can directly access it through the remote control or within the JBL ONE App.
  • What does the Sound Calibration function do?
    The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.
  • What does the Sound Feedback button on the HK SB20 remote control do ?
    The sound feedback is the tone you hear when you send a command to the soundbar. This confirmation tone can be switched off, if you do not want it to be heard.
  • What do I need to create a 5.1 wireless surround system with my OMNI BAR+?
    All products must be on Wi-Fi 5GHz network, and you need two additional OMNI+ speakers of the same model (2 x OMNI 20+ for example) to create 5.1 wireless surround sound.
  • What do the buttons do on the Vi Personal Trainer?
    (+) Button A short press will increase the volume. A long press will skip to the next track. (-) Button A short press will decrease the volume. A long press will skip back a track. Middle (Multifunction Button) A short press will play/pause music or answer/end calls. A long press on the middle button will turn the device on/off.
< 1 ... 7 8 9 10 11 12 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +6129 151 0376

Mon-Fri 8:00 AM to 5:00 PM (AEST)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Mon-Fri 8:00 AM to 5:00 PM (AEST)

message