How To
How To
670 results
-
No, this feature is not supported in our Harman Kardon Allure speaker. This might change with future updates. You can call your Amazon friends by using the Alexa app.Was this helpful? Thank you for your feedback!
-
Yes, these headphones can be connected and paired to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes. Out-the-box the JBL Bar series soundbar recognizes volume and mute controls from the most common TV remote controls. The JBL Bar series has IR learning. You can use this feature to teach the soundbar to response to your TV's remote control as well.Was this helpful? Thank you for your feedback!
-
Yes, the smooth leather headband from the K601 can be fitted onto the K701, but since it is probably no longer available as a spare part, the only option is to butcher an old 601 to do it. The work involved is very intricate and complicated, and paying a technician to do it is not an economical solution. Owner must be capable of completely dismantling the headphones, including soldering, and to reassemble them. And Harman cannot offer any assistance in doing this. As of late 2017, a new version of K701 is being marketed by AKG Professional. This version features a smooth headband instead of the version with bumps, so the issue no longer applies.Was this helpful? Thank you for your feedback!
-
It is possible to replace the ear pads, but there are details to consider. On Elite 700: The ear pads are held in place by a plastic plate with claws, and some of the claws will most likely break off when you remove the pad. You do this by grabbing under the edge where the fabric ends, then pulling hard outward. The claws will eventually let go, and some of them will break off, rattling inside the ear pod. The only way to get them out is to unscrew the speaker plate, lift it up, and shake out the broken-off claws. The new pads are simply centered over the speaker plate, and the claws pressed into the holes with a firm pressure. On Everest 700: The ear pads are glued into position with double-adhesive tape. Pull the old pads off with a forceful, steady pull, until the glue lets go. Remove the protective layer on the new pads, and carefully position them correctly before pressing home all the way around the edge.Was this helpful? Thank you for your feedback!
-
Yes, you can see all voice interactions with the Harman Kardon Allure by using the Alexa app and visiting History in Settings. Your interactions are grouped by question or request. Tap an entry to see more detail, provide feedback, or listen to audio sent to the Cloud for that entry by tapping the play icon. Sometimes Alexa may not understand you perfectly, and the translations you see in History may not always reflect exactly what you said (for example, they may be inaccurate or incomplete). You can help us improve your experience by providing feedback on inaccurate translations in History.Was this helpful? Thank you for your feedback!
-
You can only share the sound via JBL Connect through Bluetooth connected devices. TV sound is not permitted as it would cause lip-sync issues.Was this helpful? Thank you for your feedback!
-
Yes, Control Xstream is a Chromecast device that allows you to cast music content via your Chrome browser. However, the JBL Control Xstream is not made for video purposes, because there will be delay between sound and image.Was this helpful? Thank you for your feedback!
-
Yes, you can take can incoming call from the Onyx 4 by pressing the call button located between the power button and volume + button.Was this helpful? Thank you for your feedback!
-
Yes, the JBL Duet Mini features a three button microphone which enables you to pause/play, skip tracks and answer and hang up phone calls.Was this helpful? Thank you for your feedback!
-
Yes. Go into our HK Alexa Setup app, tap on the 3 line icon and click on "Lightning" to toggle it on and off.Was this helpful? Thank you for your feedback!
-
Yes, When an update is available, you will find this on the product website of the Harman Kardon Aura Studio 2, in Manuals and Downloads. You will need to connect your Harman Kardon Aura Studio 2 by USB, and run the software update from a compatible computer.Was this helpful? Thank you for your feedback!
-
Yes, from within the JBL Connect App, when you have 2 JBL Boombox speakers connected, set them in Stereo Mode. When you add a 3rd ( or more ) JBL Boombox speakers, they will automatically revert back to Party modeWas this helpful? Thank you for your feedback!
-
Yes, the remote control permits you to pick up and stop a call, and activate the voice assistant to place a call.Was this helpful? Thank you for your feedback!
-
No, the Allure speaker requires an internet connection in order to use Alexa voice commands. You can always listen to music via the Bluetooth connection if you are out of range with your Wi-Fi networkWas this helpful? Thank you for your feedback!
-
No, stereo pairs must be two of the same type of speaker. For example, two Omni 10 or two Omni 10+ speakers will work, but not one Omni 10 and one Omni 10+.Was this helpful? Thank you for your feedback!
-
Yes, that’s the best part about this speaker, there are so many options. Besides streaming over Wi-Fi, the JBL Control Xstream also offers a Bluetooth connection and an AUX inputWas this helpful? Thank you for your feedback!
-
No, When connected from multiple mobile devices ( up to 3 ) to one Harman Dual Sound enabled speaker, only the last one that connected will stay connected when enabling Harman Dual Sound. You can however connect from one mobile device to one of the 2 Harman Dual Sound enabled speakers, and activate Dual Sound afterwards. This will give you the option to interrupt the playback, in the same way as Social Mode works when connected to only one speaker.Was this helpful? Thank you for your feedback!
-
No, each headset must have its own transmitter. However, even if you try to use more than one complete set of 915 in the same room simultaneously, it may not work either. Although the 915 has an automatic scan function that finds available slots in the 2.4 gHz transmission frequency band, interference may still occur.Was this helpful? Thank you for your feedback!
-
Yes, you can use the headphones, but of course the noise cancelling will not be active.Was this helpful? Thank you for your feedback!
-
Yes, you do not need to have music playing to keep the noise cancelling switched on. There may be a slight residual hiss from the NC system, which would usually be masked by music, but there will still be a significant reduction of external noise.Was this helpful? Thank you for your feedback!
-
Streaming via Bluetooth or direct aux in connection are supported without the HK Controller app. For OMNI+ devices that you already have placed in a room, they are capable of using either Spotify Connect or Chromecast built-in without the need of using the HK Controller app. Use only the HK Controller app for setting up any OMNI+ devices you may have.Was this helpful? Thank you for your feedback!
-
Yes, you can activate the noise reduction circuits alone, with no connection to a source device by Bluetooth or cable. The headphones will stay on as long as there is power in the battery, which is close to 30 hours for pure NC function. Please note that there is a slight residual noise from the NC system, which will be drowned out by music playing, or by surrounding noise such as airplane noise. If you use the NC in surroundings that are near quiet to begin with, you may not get an improvement in noise level.Was this helpful? Thank you for your feedback!
-
Yes, but only with music via cable, and noise reduction will not be active. As soon as you insert the charging cable micro-usb plug, the Bluetooth and NC functionalities will be switched off, and they cannot be reactivated unless you remove the charging cable, and there must of course be a charge in the battery. If you listen to cabled music while charging, be prepared to hear noise under certain conditions. Both computers and switch-mode power supplies can be very noisy, and this noise can sometimes be heard as a whine or buzz. This can only be eliminated by using a power supply that does not create noise.Was this helpful? Thank you for your feedback!
-
Yes, in case your Wi-Fi does not work then simply press and hold the Bluetooth button for 3 seconds, your speaker is now in pairing mode. The button is located on the back where you connect the power cord. Please be aware that Alexa will not work on Bluetooth.Was this helpful? Thank you for your feedback!
-
No. The only way that the Noise Cancellation feature can be activated is while you are using the headphones wirelessly. You cannot use NC while the headphones are plugged into a device or charging.Was this helpful? Thank you for your feedback!
-
The JBL Quantum 800 can only be used via a 3.5mm, Bluetooth, or 2.4Ghz wireless connection.Was this helpful? Thank you for your feedback!
-
There is a buffer inside the speakers that processes the incoming signal. This buffer delays the audio signal compared to the video signal, causing a delay. For this, we do not recommend using Omni+ speakers with a TV. Our Omni bar will work with your TV sound and you can create wireless 5.1 surround sound system with the Omni bar.Was this helpful? Thank you for your feedback!
-
Yes, however, the JBL ONE App gives you another level of control over the soundbar.
Through the App, you can personalize the soundbar's performance, such as:- Customizing EQ settings
- Setting up our new feature called: My Moment
- Connect your favorite streaming music services.
Was this helpful? Thank you for your feedback! -
Yes, all sources that output analog stereo line-level signals or stereo audio optical digital signals may be used, cable-connected to the BTA 20 transmitter. Digital signals must be in PCM format. So if you have a CD player or an FM radio, you can connect the BTA 20 to it, and transmit to your Soundgear (or to other Bluetooth headphones that support the format). Please note that record players need an additional preamplifier to work this way. Of course a TV set can be connected as well, either via optical digital PCM output, via line outputs or via headphone output.Was this helpful? Thank you for your feedback!
-
No, JBL Flip 4 can wirelessly link with JBL Connect+ compatible speakers only. Currently, the Flip 4, Pulse 3 and Charge 3 ( after a firmware upgrade ) have the JBL Connect+ featureWas this helpful? Thank you for your feedback!
-
Yes, you can use your Soundgear for TV watching or playing video games. You can use the TV speakers and the Soundgear simultaneously, they will be synchronized in time.Was this helpful? Thank you for your feedback!
-
The headphones can pair to multiple devices but can only be connected to one device at a time.Was this helpful? Thank you for your feedback!
-
The JBL Endurance SPRINT, JUMP and DIVE can be used in salt water (i.e. sea) but we recommend to thoroughly wash the headphones in fresh water after every use in salt water, to remove the salt residue. Please note that only DIVE can actually be used in water, because it features a function lock and a built-in memory for MP3 music files. SPRINT and JUMP cannot be used in water, because the touch buttons will malfunction when submerged, and Bluetooth cannot function at all under water.Was this helpful? Thank you for your feedback!
-
Because bluetooth cannot travel through water, the only Endurance model that is used for swimming is the Endurance DIVE model. The Endurance DIVE model features an MP3 player which allows you to listen to music under water without using bluetooth. Furthermore, only DIVE features a function lock, which prevents water from activating functions inadvertently. SPRINT and JUMP do not have this lock function, and will not work under water.Was this helpful? Thank you for your feedback!
-
Yes, you can use cabled audio connection instead of Bluetooth on the N60NC Wireless, if you prefer. You can listen to a cabled source even if the battery is empty, but the noise cancelling function will of course not be available in this case. If the battery is charged, you can switch noise cancellation on or off at will. You do not have to have a cable connected at all. You can use the headphones as noise cancellers just by putting them on, and switching NC on.Was this helpful? Thank you for your feedback!
-
Yes, the click-on connector that holds the earphone in place on the Oculus Rift is adjustable in small clicks, longer or shorter.Was this helpful? Thank you for your feedback!
-
The UA Sport Wireless Flex can be paired to multiple devices but cannot connect to more than once device at a time.Was this helpful? Thank you for your feedback!
-
Unfortunately, the Y50BT headphones cannot be paired to multiple devices at the same time.Was this helpful? Thank you for your feedback!
-
Wireless dual sound can be used to pair two speakers which has the wireless dual sound technology, Which are Aura Studio 2, GO+PLAY, Onyx studio 3, Onyx mini. Please note: Dual Wireless Sound only has the capability to connect no more than 2 speakers at a time. NOTE: The Onyx Studio 5, which also has Dual Wireless Sound, can NOT be used together with other products which feature DWS. Only 2 Onyx Studio 5's can pair with eachother.Was this helpful? Thank you for your feedback!
-
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
No. Unfortunately, you cannot connect to multiple devices on the 750NC Wireless headphones. You can pair to multiple devices, but can only be connected to one device at a time. The Everest 710 and 310 feature ShareMe 2.0, which permits listening to the same source over two headphones, wirelessly.Was this helpful? Thank you for your feedback!
-
Yes. A built-in microphone combined with a patented echo cancellation system secures clear and easy phone conversation. If a phone call is received while listening to music just push play button to answer the call. No need to find or touch the phone. This hands-free functionality can even be used for phone conferencesWas this helpful? Thank you for your feedback!
-
Yes, the Live 100 features the one button microphone that allows you to receive and end calls. Simply press the middle button on the inline mic for 1-2 seconds to answer the call. If you wish to hang up, press and hold the center button again for 1-2 seconds.Was this helpful? Thank you for your feedback!
-
Yes. To take a call from the Live 200BT press the center button located on the RIGHT neckband for 1-2 seconds. To hang up, simply press the center button again.Was this helpful? Thank you for your feedback!
-
You have the option to turn the Noise Cancellation on and off by using the switch that is located on the right side of the NC box. When choosing the switch option, you will see a green light inside the the switch will indicate that the Noise Cancelation is on. To turn off the Noise Cancelation, move the switch down towards the cable and the green light will turn off. When charging this device with the micro USB charging cable included in the packaging, you will see the light turn orange to indicate that it is charging.Was this helpful? Thank you for your feedback!
-
No. Bluetooth does not work under water. The Endurance DIVE however has a built-in MP3 player for music, and is IPX7 waterproof. This means you can use the headphones submerged to 1 meter depth, up to 30 minutes at a time. Also note that for normal swimming, you won't be submerged all the time, so the headphones should be waterproof for the duration of your swim.Was this helpful? Thank you for your feedback!
-
Yes, you can use the headset while charging!Was this helpful? Thank you for your feedback!
-
Yes, it's normal to get warm during charging. The InfinityLAB charger features over temperature protection to ensure your usage is safe.
Was this helpful? Thank you for your feedback! -
InstantGo 10,000 with a built-in USB-C cable and InstantGo 10,000 Wireless should be able to charge your laptop.
However, it may not apply to laptops that require output power of more than 30W.
Please check your laptop requirement before charging it with our devices.
Was this helpful? Thank you for your feedback! -
Our InfinityLab power bank should work with most cases in the market, and it depends on the design of the protected case/cover.
However, if your case’s bottom surface is thicker than 3mm, it may impact your wireless charging experience, and we recommend taking off the protected case/cover for the best charging experience.
If your phone case/cover has a metal plate on the back, it will not charge your device since it is a security feature of the FOD (Foreign object detection). This means our Infinity Lab Qi-certified power bank can detect if a foreign object, such as metal, is on its surface. If that happens, the wireless charger either stops charging or does not start charging at all.
Was this helpful? Thank you for your feedback! -
To charge the headphones, place inside charging case. While charging, both LEFT and RIGHT ear bud will display a sold red light. Once the headphones are fully charged. The red light will turn OFF. When the charging case is fully charged, the white LED's will light up accordingly. Battery life can last for 10-hours per charge. You may recharge your earphones for another 40-hours playtime with the charging case. It takes 2 hours to fully charge the charing case.Was this helpful? Thank you for your feedback!
-
It will take about 4 hours to fully charge the InfinityLab ClearCall speakerphone using a charger that supports 5V 2A.Was this helpful? Thank you for your feedback!
-
USB-A output doesn’t support PD fast charging. To enjoy PD fast charging and with your device support, please use USB-C output (if your InfinityLab device has a USB-C output).
Was this helpful? Thank you for your feedback! -
We suggest picking one way to charge your phone, so either charge your phone through wireless charging or wired charging. You cannot charge one device using both options at the same time.
Was this helpful? Thank you for your feedback! -
100W, 65W and 30W InfinityLAB chargers can fast charge USB-C equipped laptops.
The 100W charger supports laptops that require output power no more than 100W.
The 65W charger supports laptops that require output power no more than 65W.
The 30W charger supports laptop that require output power no more than 30W.Was this helpful? Thank you for your feedback! -
General information about WiSA:
WiSA is a wireless system designed specifically for audio and speakers. An audio system that incorporates WiSA technology has it's own internal wireless system. It is capable of doing 96kHz/24bit audio with an audio latency of only 5ms, virtually undetectable by the human ear.
For more information on WiSA technology, please go to the official WiSA website.
If a product is WiSA Certified, it can be used with any other WiSA certified product. For example a WiSA Ready TV with at transmitter.
Note: The overall sound quality is dependent on the processing and setup in the WiSA TV & transmitter, and may result in a performance (EQ, crossover and levels) not intended by the speaker manufacturer. To be sure that the Citation products sound the best, use a Citation Bar product as the main "hub".
Citation Surrounds
Current WiSA Certified products:
Citation Sub
Citation Sub S
Citation Towers
Citation Bar
Current products making use of WiSA technology:
Citation Multibeam 700
HK surround
WiSA does not offer 3D audio formats like Dolby Atmos, and DTS:X yet, so at the moment it is limited to 5.1 or 7.1 Dolby Digital. So regardless of which brand of WiSA speaker you choose, Dolby Atmos will not be available yet.
Limitations:Was this helpful? Thank you for your feedback! -
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.Was this helpful? Thank you for your feedback! -
It can fast charge almost anything with a USB-A or USB-C cable—phones, earbuds, power banks, cameras, even your laptop or gaming console.Was this helpful? Thank you for your feedback!
-
This product is not supported by Connect + or Partyboost on the JBL Portable app. They cannot connect to other portable speakers wirelessly.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with Us
Mon-Fri 8:00 AM to 5:00 PM (AEST)
