How To

Support Overview / How To

How To

670 results
  • Charger gets warm while charging
    Yes, it's normal to get warm during charging. The InfinityLAB charger features over temperature protection to ensure your usage is safe.
     
  • Charge and play at the same time!
    Yes, you can use the headset while charging!
  • Can you use Bluetooth while under water using the Endurance Dive?
    No. Bluetooth does not work under water. The Endurance DIVE however has a built-in MP3 player for music, and is IPX7 waterproof. This means you can use the headphones submerged to 1 meter depth, up to 30 minutes at a time. Also note that for normal swimming, you won't be submerged all the time, so the headphones should be waterproof for the duration of your swim.
  • Can you turn the noise canceling option on and off on SOHO II NC?
    You have the option to turn the Noise Cancellation on and off by using the switch that is located on the right side of the NC box. When choosing the switch option, you will see a green light inside the the switch will indicate that the Noise Cancelation is on. To turn off the Noise Cancelation, move the switch down towards the cable and the green light will turn off. When charging this device with the micro USB charging cable included in the packaging, you will see the light turn orange to indicate that it is charging.
  • Can you take calls from the Live 200BT?
    Yes. To take a call from the Live 200BT press the center button located on the RIGHT neckband for 1-2 seconds. To hang up, simply press the center button again.
  • Can you take calls from the JBL Live 100?
    Yes, the Live 100 features the one button microphone that allows you to receive and end calls. Simply press the middle button on the inline mic for 1-2 seconds to answer the call. If you wish to hang up, press and hold the center button again for 1-2 seconds.
  • Can you receive phone calls on the Clip 3?
    Yes. A built-in microphone combined with a patented echo cancellation system secures clear and easy phone conversation. If a phone call is received while listening to music just push play button to answer the call. No need to find or touch the phone. This hands-free functionality can even be used for phone conferences
  • Can you connect to multiple devices on the 750NC?
    No. Unfortunately, you cannot connect to multiple devices on the 750NC Wireless headphones. You can pair to multiple devices, but can only be connected to one device at a time. The Everest 710 and 310 feature ShareMe 2.0, which permits listening to the same source over two headphones, wirelessly.
  • Can you activate SIRI on the UA Train headphones?
    Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.
  • Can Wireless dual sound be used in connection with other products?
    Wireless dual sound can be used to pair two speakers which has the wireless dual sound technology, Which are Aura Studio 2, GO+PLAY, Onyx studio 3, Onyx mini. Please note: Dual Wireless Sound only has the capability to connect no more than 2 speakers at a time. NOTE: The Onyx Studio 5, which also has Dual Wireless Sound, can NOT be used together with other products which feature DWS. Only 2 Onyx Studio 5's can pair with eachother.
  • Can the Y50BT headphones be paired to multiple devices?
    Unfortunately, the Y50BT headphones cannot be paired to multiple devices at the same time.
  • Can the UA Sport Wireless Flex headphone be paired to multiple devices?
    The UA Sport Wireless Flex can be paired to multiple devices but cannot connect to more than once device at a time.
  • Can the size be adjusted on OR300?
    Yes, the click-on connector that holds the earphone in place on the Oculus Rift is adjustable in small clicks, longer or shorter.
  • Can the N60NC Wireless play via cable, maybe even if battery is empty?
    Yes, you can use cabled audio connection instead of Bluetooth on the N60NC Wireless, if you prefer. You can listen to a cabled source even if the battery is empty, but the noise cancelling function will of course not be available in this case. If the battery is charged, you can switch noise cancellation on or off at will. You do not have to have a cable connected at all. You can use the headphones as noise cancellers just by putting them on, and switching NC on.
  • Can the JBL Endurance SPRINT, JUMP and DIVE be used to swim?
    Because bluetooth cannot travel through water, the only Endurance model that is used for swimming is the Endurance DIVE model. The Endurance DIVE model features an MP3 player which allows you to listen to music under water without using bluetooth. Furthermore, only DIVE features a function lock, which prevents water from activating functions inadvertently. SPRINT and JUMP do not have this lock function, and will not work under water.
  • Can the JBL Endurance SPRINT, JUMP and DIVE be used in salt water (i.e. sea)?
    The JBL Endurance SPRINT, JUMP and DIVE can be used in salt water (i.e. sea) but we recommend to thoroughly wash the headphones in fresh water after every use in salt water, to remove the salt residue. Please note that only DIVE can actually be used in water, because it features a function lock and a built-in memory for MP3 music files. SPRINT and JUMP cannot be used in water, because the touch buttons will malfunction when submerged, and Bluetooth cannot function at all under water.
  • Can the Endurance Series be connected to more than one device at a time?
    The headphones can pair to multiple devices but can only be connected to one device at a time.
  • Can JBL Soundgear be used with a TV or with video games?
    Yes, you can use your Soundgear for TV watching or playing video games. You can use the TV speakers and the Soundgear simultaneously, they will be synchronized in time.
  • Can I wirelessly link JBL Flip 4 together with JBL Flip 3, Pulse 2 or Xtreme?
    No, JBL Flip 4 can wirelessly link with JBL Connect+ compatible speakers only. Currently, the Flip 4, Pulse 3 and Charge 3 ( after a firmware upgrade ) have the JBL Connect+ feature
  • Can I use the Soundgear with its BTA 20 Bluetooth transmitter with all kinds of sources?
    Yes, all sources that output analog stereo line-level signals or stereo audio optical digital signals may be used, cable-connected to the BTA 20 transmitter. Digital signals must be in PCM format. So if you have a CD player or an FM radio, you can connect the BTA 20 to it, and transmit to your Soundgear (or to other Bluetooth headphones that support the format). Please note that record players need an additional preamplifier to work this way. Of course a TV set can be connected as well, either via optical digital PCM output, via line outputs or via headphone output.
  • Can I use the soundbar without the App?
    Yes, however, the JBL ONE App gives you another level of control over the soundbar.
    Through the App, you can personalize the soundbar's performance, such as:
    • Customizing EQ settings
    • Setting up our new feature called: My Moment 
    • Connect your favorite streaming music services.
  • Can I use the OMNI 10+, 20+ or 50+ speakers for my TV?
    There is a buffer inside the speakers that processes the incoming signal. This buffer delays the audio signal compared to the video signal, causing a delay. For this, we do not recommend using Omni+ speakers with a TV. Our Omni bar will work with your TV sound and you can create wireless 5.1 surround sound system with the Omni bar.
  • Can I use the JBL Quantum 800 in USB mode
    The JBL Quantum 800 can only be used via a 3.5mm, Bluetooth, or 2.4Ghz wireless connection.
  • Can I use the Everest Noise Cancelling feature while plugged into a device with my audio cable or flight adapter?
    No. The only way that the Noise Cancellation feature can be activated is while you are using the headphones wirelessly. You cannot use NC while the headphones are plugged into a device or charging.
  • Can I use the Bluetooth on my Harman Kardon Allure speaker without being connected to Wi-Fi?
    Yes, in case your Wi-Fi does not work then simply press and hold the Bluetooth button for 3 seconds, your speaker is now in pairing mode. The button is located on the back where you connect the power cord. Please be aware that Alexa will not work on Bluetooth.
  • Can I use the AKG N60NC Wireless while it is charging?
    Yes, but only with music via cable, and noise reduction will not be active. As soon as you insert the charging cable micro-usb plug, the Bluetooth and NC functionalities will be switched off, and they cannot be reactivated unless you remove the charging cable, and there must of course be a charge in the battery. If you listen to cabled music while charging, be prepared to hear noise under certain conditions. Both computers and switch-mode power supplies can be very noisy, and this noise can sometimes be heard as a whine or buzz. This can only be eliminated by using a power supply that does not create noise.
  • Can I use my TUNE600BTnc as noise-reduction headset without music?
    Yes, you can activate the noise reduction circuits alone, with no connection to a source device by Bluetooth or cable. The headphones will stay on as long as there is power in the battery, which is close to 30 hours for pure NC function. Please note that there is a slight residual noise from the NC system, which will be drowned out by music playing, or by surrounding noise such as airplane noise. If you use the NC in surroundings that are near quiet to begin with, you may not get an improvement in noise level.
  • Can I use my OMNI+ device without the HK Controller App?
    Streaming via Bluetooth or direct aux in connection are supported without the HK Controller app. For OMNI+ devices that you already have placed in a room, they are capable of using either Spotify Connect or Chromecast built-in without the need of using the HK Controller app. Use only the HK Controller app for setting up any OMNI+ devices you may have.
  • Can I use my E65BTNC as a noise-cancelling headset without music?
    Yes, you do not need to have music playing to keep the noise cancelling switched on. There may be a slight residual hiss from the NC system, which would usually be masked by music, but there will still be a significant reduction of external noise.
  • Can I use my AKG N20 NC even if the battery is not charged?
    Yes, you can use the headphones, but of course the noise cancelling will not be active.
  • Can I use more than one K915 headset with the wireless transmitter?
    No, each headset must have its own transmitter. However, even if you try to use more than one complete set of 915 in the same room simultaneously, it may not work either. Although the 915 has an automatic scan function that finds available slots in the 2.4 gHz transmission frequency band, interference may still occur.
  • Can I use Dual Sound and Social mode at the same time on my Aura Studio 2?
    No, When connected from multiple mobile devices ( up to 3 ) to one Harman Dual Sound enabled speaker, only the last one that connected will stay connected when enabling Harman Dual Sound. You can however connect from one mobile device to one of the 2 Harman Dual Sound enabled speakers, and activate Dual Sound afterwards. This will give you the option to interrupt the playback, in the same way as Social Mode works when connected to only one speaker.
  • Can I use Bluetooth with my Control Xstream
    Yes, that’s the best part about this speaker, there are so many options. Besides streaming over Wi-Fi, the JBL Control Xstream also offers a Bluetooth connection and an AUX input
  • Can I use an Omni+ speaker and a 1st generation Omni speaker together in a stereo pair?
    No, stereo pairs must be two of the same type of speaker. For example, two Omni 10 or two Omni 10+ speakers will work, but not one Omni 10 and one Omni 10+.
  • Can I use Alexa with my Harman Kardon Allure speaker offline?
    No, the Allure speaker requires an internet connection in order to use Alexa voice commands. You can always listen to music via the Bluetooth connection if you are out of range with your Wi-Fi network
  • Can I use AKG N20 NC for telephone conversations?
    Yes, the remote control permits you to pick up and stop a call, and activate the voice assistant to place a call.
  • Can I use 2 JBL Boombox speakers in Stereo?
    Yes, from within the JBL Connect App, when you have 2 JBL Boombox speakers connected, set them in Stereo Mode. When you add a 3rd ( or more ) JBL Boombox speakers, they will automatically revert back to Party mode
  • Can I update the software on my Aura Studio 2?
    Yes, When an update is available, you will find this on the product website of the Harman Kardon Aura Studio 2, in Manuals and Downloads. You will need to connect your Harman Kardon Aura Studio 2 by USB, and run the software update from a compatible computer.
  • Can I turn off the light on my Harman Kardon Allure speaker?
    Yes. Go into our HK Alexa Setup app, tap on the 3 line icon and click on "Lightning" to toggle it on and off.
  • Can I take phone calls with the JBL Duet Mini BT headphone?
    Yes, the JBL Duet Mini features a three button microphone which enables you to pause/play, skip tracks and answer and hang up phone calls.
  • Can I take calls from the Onyx Studio 4?
    Yes, you can take can incoming call from the Onyx 4 by pressing the call button located between the power button and volume + button.
  • Can I stream Google Chromecast via my PC to Control Xstream?
    Yes, Control Xstream is a Chromecast device that allows you to cast music content via your Chrome browser. However, the JBL Control Xstream is not made for video purposes, because there will be delay between sound and image.
  • Can I share TV sound through JBL Connect using SB450?
    You can only share the sound via JBL Connect through Bluetooth connected devices. TV sound is not permitted as it would cause lip-sync issues.
  • Can I see my voice interaction history somewhere on my Harman Kardon Allure?
    Yes, you can see all voice interactions with the Harman Kardon Allure by using the Alexa app and visiting History in Settings. Your interactions are grouped by question or request. Tap an entry to see more detail, provide feedback, or listen to audio sent to the Cloud for that entry by tapping the play icon. Sometimes Alexa may not understand you perfectly, and the translations you see in History may not always reflect exactly what you said (for example, they may be inaccurate or incomplete). You can help us improve your experience by providing feedback on inaccurate translations in History.
  • Can I replace the ear pads on my Everest 700 or Elite 700 headphones?
    It is possible to replace the ear pads, but there are details to consider. On Elite 700: The ear pads are held in place by a plastic plate with claws, and some of the claws will most likely break off when you remove the pad. You do this by grabbing under the edge where the fabric ends, then pulling hard outward. The claws will eventually let go, and some of them will break off, rattling inside the ear pod. The only way to get them out is to unscrew the speaker plate, lift it up, and shake out the broken-off claws. The new pads are simply centered over the speaker plate, and the claws pressed into the holes with a firm pressure. On Everest 700: The ear pads are glued into position with double-adhesive tape. Pull the old pads off with a forceful, steady pull, until the glue lets go. Remove the protective layer on the new pads, and carefully position them correctly before pressing home all the way around the edge.
  • Can I replace the AKG K701 leather headband with the bumps for a smooth one?
    Yes, the smooth leather headband from the K601 can be fitted onto the K701, but since it is probably no longer available as a spare part, the only option is to butcher an old 601 to do it. The work involved is very intricate and complicated, and paying a technician to do it is not an economical solution. Owner must be capable of completely dismantling the headphones, including soldering, and to reassemble them. And Harman cannot offer any assistance in doing this. As of late 2017, a new version of K701 is being marketed by AKG Professional. This version features a smooth headband instead of the version with bumps, so the issue no longer applies.
  • Can I program my TV remote to the JBL Bar Studio, Bar 2.1, Bar 3.1, Bar 5.1 and Bar 9.1?
    Yes. Out-the-box the JBL Bar series soundbar recognizes volume and mute controls from the most common TV remote controls. The JBL Bar series has IR learning. You can use this feature to teach the soundbar to response to your TV's remote control as well.
  • Can I pair my Focus 500/700 to multiple devices?
    Yes, these headphones can be connected and paired to two devices at the same time.
  • Can I make phone calls via my Harman Kardon Allure speaker?
    No, this feature is not supported in our Harman Kardon Allure speaker. This might change with future updates. You can call your Amazon friends by using the Alexa app.
  • Can I listen to music while charging my JBL DUET NC?
    Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.
  • Can I listen to music while charging my E65BTNC?
    Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.
  • Can I listen to music while charging my E55BT or E45BT?
    Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.
  • Can I get wallmounts for Control Xstream
    Please note that although the Control Xstream does have a threaded insert for brackets, JBL offers no brackets. Custom made wallmounts should be used.
  • Can I factory reset my JBL Playlist speaker?
    Yes, the JBL Playlist can be reset to factory settings. First, Power ON the JBL Playlist. Secondly, press and hold the Play and Volume (-) buttons simultaneously for about 10 seconds, and after 10 seconds you should see the Play/Pause and Bluetooth button light up, followed by the speaker going into Standby. Once you see the speaker powers back ON, reset is complete.
  • Can I create my own custom equalization settings?
    Yes!
    By using the JBL ONE app, you can change the equalization settings of the soundbar to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:
    • BASS: Adjust the lower frequency sounds, such as bass or a kick drum.
    • MID: Adjust the mid-frequency sounds, such as human speech.
    • TREBLE: Adjust the higher frequency sounds for clarity.
  • Can I create a Multi-room system with Harman Kardon Allure?
    Not yet, because this feature is not implemented in our system. We are working on future updates to add the functionality that will make Harman Kardon Allure work in a Multi-room environment.
  • Can I control my OMNI 10+, 20+ or 50+ speakers when I'm on 2.4GHz Wi-Fi network?
    Yes, with OMNI+ you can add speakers to both bands, but your smart device is not required to be on the same band, just be sure they are on the same network.
  • Can I connect to multiple devices on the JBL DUETNC?
    Yes. The JBL DUETNC headphones have the ability to pair and connect to two devices at the same time.
  • Can I connect to multiple devices on the E65BTNC?
    Yes. The E65BTNC headphones have the ability to pair and connect to two devices at the same time.
  • Can I connect to multiple devices at the same time on the Inspire/Focus 500 headphones?
    Yes, these headphones can be connected and paired to two devices at the same time.
< 1 ... 7 8 9 10 11 12 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +6129 151 0376

Mon-Fri 8:00 AM to 5:00 PM (AEST)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Mon-Fri 8:00 AM to 5:00 PM (AEST)

message