How To
How To
670 results
-
No, the app works with the ELITE models only. These are the ones that feature Active Noise Cancelling.Was this helpful? Thank you for your feedback!
-
No, the headphones switch on and off with the Oculus Rift.Was this helpful? Thank you for your feedback!
-
No, this cable is straight, with no remote control. The headphones have remote control buttons on the ear pods, which can be used when listening over Bluetooth wireless.Was this helpful? Thank you for your feedback!
-
Yes, the cable has a one-button remote control and a microphone. This means that you can pause, resume play, you can pick up the phone and stop a call, and talk to other people through the microphone. There is no option to control music volume on the cable remote. That is only possible when using the Bluetooth system for wireless listening, with the volume buttons on the ear pod.Was this helpful? Thank you for your feedback!
-
Yes. All but the Bar Studio model have an LED display on the soundbar's front panel. The display tells which source input, volume level, and sound feature you are on. You are able to dim the display, using the remote, during low light usage.Was this helpful? Thank you for your feedback!
-
There is a Wi-Fi indicator on the back of the main speaker, and when it turns amber, it indicates that the Wi-Fi signal is weak. Try to move the speaker closer to your Wi-Fi router, and when the signal indicator turns White again, then it has a steady connection.Was this helpful? Thank you for your feedback!
-
No. This is a wired headphone that features a detachable one button universal remote/microphone. This headphone does not have bluetooth capabilities.Was this helpful? Thank you for your feedback!
-
No. The 600BTNC headphone does not feature any IPX rating that protects it against sweat or water. Over exposure to water can compromise the controls on the headphones.Was this helpful? Thank you for your feedback!
-
Yes, the UA Sport Wireless Flex has an IPX5+ rating which makes it resistant to sweat and moisture.Was this helpful? Thank you for your feedback!
-
Yes, the Xtreme 2 features an IPX 7 rating. IPX7 is defined as the speaker can be immersed in water up to 1 meter for up to 30 minutes.Was this helpful? Thank you for your feedback!
-
This model is supported by the JBL Partybox App.
Download the JBL Partybox App from the App Store or Google Play Store and install it to use the following features:
SETTINGS: OTA update | Firmware Version | Quick Start Guide
REMOTE CONTROL: Music playback – Play/Pause & Skip Track | Karaoke – Bass/Treble/Echo | DJ sound effect – Here you can swap which samples will play when you hit the three Sound Effect buttons on the top panel, or play all of the available sounds on one screen | Top panel control | Source select | Bass Boost – On/Off
LIGHT SHOW: Fully customize your light show in real time – Change light themes and animations to suit your mood | Turn animations on or off | Turn the strobe on or off | Customize color (preset or color palette) | SOLO mode
GET LOUD: Connect in TWS, switch Stereo channels and enable Party ModeWas this helpful? Thank you for your feedback! -
This headphone does not feature volume control. You must manually control volume from your device.Was this helpful? Thank you for your feedback!
-
Please check with your car manufacturer to ensure your car supports CAN or K-line. JBL DRG only works with CAN and K-line to get the engine data for engine sound simulation. If your car does support CAN or K-line, please launch the JBL DRG app and check the engine sound volume bar (the right column with button marked with “E”) in the “Sound Mode” section to make sure it is not turned off.Was this helpful? Thank you for your feedback!
-
Please use an OBD II extension cable in this case. An extension cable is not included in the package but they are readily available for purchase on-line.Was this helpful? Thank you for your feedback!
-
When you place the two Free earphones in the charging case, you will see a white led ring light up on both of them. At the same time, some of the four dot-leds on the charging case will light up to indicate the battery level of the case battery. When the earphones are fully charged, the white led ring goes out on each of them. When both are fully charged, the charging case charging level leds go out too.Was this helpful? Thank you for your feedback!
-
The JBL Free automatically switches from stereo to mono when making or taking phone calls. Voice calls will only come through the right ear piece for a more natural call experience.Was this helpful? Thank you for your feedback!
-
In the event that left and right ear piece pairing is lost, power on both ear pieces and press the buttons 3 times on each ear piece to initiate re-pair.Was this helpful? Thank you for your feedback!
-
In the event that ear pieces do not re-pair automatically to paired Bluetooth device, power off ear pieces individually by press and hold the buttons for 5 seconds. To enter Bluetooth pairing mode when ear pieces are powered off, press and hold on buttons of both earpieces for 8 seconds. Re-pair the right ear piece with desired Bluetooth device when LED indicator on right ear piece alternates between blue and white LED lights.Was this helpful? Thank you for your feedback!
-
Remove ear pieces from the case. Both ear pieces should automatically connect to each other. Wireless connections are automatically established when the headphones are taken out of the case. To pair to a different device, press and hold the Right ear piece for 5 seconds as it alternates between blue and white LED lights. Make sure that the device you are attempting to connect to is in pairing mode. The JBL Free should display on discoverable devices within 3-8 seconds. Choose JBL Free and the headphones will connect after you hear the audio confirmation tone.Was this helpful? Thank you for your feedback!
-
Remove the Right ear piece from the case. (It should automatically enter into pairing mode and will alternate between blue and white LED) Make sure the unit you are trying to connect to is in pairing mode. It should recognize the JBL Free within 3-8 seconds. Choose "JBL Free" to connect.Was this helpful? Thank you for your feedback!
-
The JBL Free has an IPX5 rating that helps protect the headphones from sweat and moisture.Was this helpful? Thank you for your feedback!
-
The JBL Free X does not feature volume control. In order to adjust the volume, you must manually increase/decrease from your device.Was this helpful? Thank you for your feedback!
-
You cannot download the JBL Portable App on a PC. This app is only available on mobile devices.Was this helpful? Thank you for your feedback!
-
You can adjust Equalizer, Spatial Sound, RGB LED effects, change microphone settings and update the headset's firmware
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with Us
Mon-Fri 8:00 AM to 5:00 PM (AEST)
