How To
How To
670 results
-
To pair and connect to a different device, press and hold the bluetooth button located on the bottom of the right ear cup until you hear the audible voice stating "looking for device." Make sure the the device you are trying to connect to are in search mode. The headphones should display on "Discoverable Devices" within 2-3 seconds. Choose the Pair option and you should hear the audible voice state "connected" and the LED light should transition into a slow blinking blue light.Was this helpful? Thank you for your feedback!
-
Yes, these headphones can be connected and paired to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes. The E65BTNC headphones have the ability to pair and connect to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes. The JBL DUETNC headphones have the ability to pair and connect to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes, with OMNI+ you can add speakers to both bands, but your smart device is not required to be on the same band, just be sure they are on the same network.Was this helpful? Thank you for your feedback!
-
Not yet, because this feature is not implemented in our system. We are working on future updates to add the functionality that will make Harman Kardon Allure work in a Multi-room environment.Was this helpful? Thank you for your feedback!
-
Yes!
By using the JBL ONE app, you can change the equalization settings of the soundbar to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:- BASS: Adjust the lower frequency sounds, such as bass or a kick drum.
- MID: Adjust the mid-frequency sounds, such as human speech.
- TREBLE: Adjust the higher frequency sounds for clarity.
Was this helpful? Thank you for your feedback! -
Yes, the JBL Playlist can be reset to factory settings. First, Power ON the JBL Playlist. Secondly, press and hold the Play and Volume (-) buttons simultaneously for about 10 seconds, and after 10 seconds you should see the Play/Pause and Bluetooth button light up, followed by the speaker going into Standby. Once you see the speaker powers back ON, reset is complete.Was this helpful? Thank you for your feedback!
-
Please note that although the Control Xstream does have a threaded insert for brackets, JBL offers no brackets. Custom made wallmounts should be used.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
No, this feature is not supported in our Harman Kardon Allure speaker. This might change with future updates. You can call your Amazon friends by using the Alexa app.Was this helpful? Thank you for your feedback!
-
Yes, these headphones can be connected and paired to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes. Out-the-box the JBL Bar series soundbar recognizes volume and mute controls from the most common TV remote controls. The JBL Bar series has IR learning. You can use this feature to teach the soundbar to response to your TV's remote control as well.Was this helpful? Thank you for your feedback!
-
Yes, the smooth leather headband from the K601 can be fitted onto the K701, but since it is probably no longer available as a spare part, the only option is to butcher an old 601 to do it. The work involved is very intricate and complicated, and paying a technician to do it is not an economical solution. Owner must be capable of completely dismantling the headphones, including soldering, and to reassemble them. And Harman cannot offer any assistance in doing this. As of late 2017, a new version of K701 is being marketed by AKG Professional. This version features a smooth headband instead of the version with bumps, so the issue no longer applies.Was this helpful? Thank you for your feedback!
-
It is possible to replace the ear pads, but there are details to consider. On Elite 700: The ear pads are held in place by a plastic plate with claws, and some of the claws will most likely break off when you remove the pad. You do this by grabbing under the edge where the fabric ends, then pulling hard outward. The claws will eventually let go, and some of them will break off, rattling inside the ear pod. The only way to get them out is to unscrew the speaker plate, lift it up, and shake out the broken-off claws. The new pads are simply centered over the speaker plate, and the claws pressed into the holes with a firm pressure. On Everest 700: The ear pads are glued into position with double-adhesive tape. Pull the old pads off with a forceful, steady pull, until the glue lets go. Remove the protective layer on the new pads, and carefully position them correctly before pressing home all the way around the edge.Was this helpful? Thank you for your feedback!
-
Yes, you can see all voice interactions with the Harman Kardon Allure by using the Alexa app and visiting History in Settings. Your interactions are grouped by question or request. Tap an entry to see more detail, provide feedback, or listen to audio sent to the Cloud for that entry by tapping the play icon. Sometimes Alexa may not understand you perfectly, and the translations you see in History may not always reflect exactly what you said (for example, they may be inaccurate or incomplete). You can help us improve your experience by providing feedback on inaccurate translations in History.Was this helpful? Thank you for your feedback!
-
You can only share the sound via JBL Connect through Bluetooth connected devices. TV sound is not permitted as it would cause lip-sync issues.Was this helpful? Thank you for your feedback!
-
Yes, Control Xstream is a Chromecast device that allows you to cast music content via your Chrome browser. However, the JBL Control Xstream is not made for video purposes, because there will be delay between sound and image.Was this helpful? Thank you for your feedback!
-
Yes, you can take can incoming call from the Onyx 4 by pressing the call button located between the power button and volume + button.Was this helpful? Thank you for your feedback!
-
Yes, the JBL Duet Mini features a three button microphone which enables you to pause/play, skip tracks and answer and hang up phone calls.Was this helpful? Thank you for your feedback!
-
Yes. Go into our HK Alexa Setup app, tap on the 3 line icon and click on "Lightning" to toggle it on and off.Was this helpful? Thank you for your feedback!
-
Yes, When an update is available, you will find this on the product website of the Harman Kardon Aura Studio 2, in Manuals and Downloads. You will need to connect your Harman Kardon Aura Studio 2 by USB, and run the software update from a compatible computer.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with Us
Mon-Fri 8:00 AM to 5:00 PM (AEST)
