How To

Support Overview / How To

How To

670 results

Sort

Page size

Re-broadcasting any TV or Movie signal from your OMNI BAR+ or ADAPT+

No, that is not possible. However, you can create a 5.1 wireless surround system to extend your TV or movie sound. All you need is two additional OMNI+ speakers, such as 2 x OMNI 10+, OMNI 20+ or OMNI 50+.

Was this helpful? Thank you for your feedback!
Reflect Fit Headphones: Track Control

To skip the tracks forward, press and hold the volume up (+) button for 1-2 seconds and you will advanced to the next song. To start the current song you are listening to over, press and hold the volume down (-) button for 1-2 seconds. Please note: You can only advance to the next song be skipping forward, you cannot skip tracks backward. You can only restart the current song over by pressing the volume down (-) button.

Was this helpful? Thank you for your feedback!
Reflect Mini 2: Pairing Information

To connect to a different Bluetooth device, first switch the headphones off. Now press and hold the center button on the headphone remote control for about 3-5 seconds. You should see the light blinking red/blue to indicate pairing mode, and the voice prompt should state “looking for device”. You should see "Reflect Mini 2" appear on the source's BT list. Choose that option, and wait for the voice prompt to state “connected”

Was this helpful? Thank you for your feedback!
Removing or replacing the integrated cable

The integrated cable cannot be replaced or detached.
In case cable is damage please contact our customer service team for help.

Was this helpful? Thank you for your feedback!

To reset the headphones, power on the headphones and plug in the USB cable into a USB charger or USB port. Paired mobile devices should disconnect and the led should be constant white. When unplugging the USB cable, the headphones will power off. When manually powering on the headphones, and the last connected mobile phone is not in range, the headphones will revert to Bluetooth Pairing mode ( blue led will blink ) after 5 seconds.

Was this helpful? Thank you for your feedback!

Screen brightness information

If the screen appears dark, try repositioning the Horizon 2 for the light sensor to work to the fullest. In some positions, the Horizon 2 cannot effectively detect the ambient light level in the room.

Was this helpful? Thank you for your feedback!
Setup instructions for Android
1. Power on your Harman Kardon Citation speaker.
2. Verify that you are connected to the right Wi-Fi network on your smartphone.
3. Enable Bluetooth
4. Enable Location services
5. Open your Google Home app
  1. Make sure you have permitted the Google Home app to view your location.
6. First option Tap Add Set up device Set up new devices in your home
7. Second option Tap X device found Select Home location
8. Follow the instruction on screen to add your new Harman Kardon Citation speaker.
Still not sure how to connect, then watch this video below:
Was this helpful? Thank you for your feedback!
Setup instructions for Apple iOS devices
1. Power on your Harman Kardon Citation speaker.
2. Verify that you are connected to the right Wi-Fi network on your smartphone.
3. Open your Google Home app .
4. Enable Bluetooth
5. First option Tap Add Set up device Set up new devices in your home
6. Second option Tap X device found Select Home location
7. Follow the instruction on screen to add your new Harman Kardon Citation speaker.
Still not sure how to connect, then watch this video below:
Was this helpful? Thank you for your feedback!
Singing while playing Bluetooth music

You can have your own Karaoke party with your JBL Partybox. Simply connect your Microphone (only included with the Partybox On The Go) and connect your mobile device over Bluetooth, then start playing music and sing along, it is that simple!

Was this helpful? Thank you for your feedback!
Sometimes, I am not able to connect JBL DRG with my smartphone.

Please check that you have connected your android phone with JBL DRG before. Power off your Android phone and press the JBL DRG BT button to connect to another smartphone. If this is the case, please wait 3 minutes for JBL DRG to setup the Bluetooth connection with a new smartphone. This is because some android phones can’t send a “Disconnect” BT command to JBL DRG during power off, so JBL DRG need to wait until the Link is lost.

Was this helpful? Thank you for your feedback!
Sometimes my Chromecast enabled streaming app cannot see my Citation speaker. What should I do?

"In certain network conditions, your speaker may not be visible from your streaming app. You can still use voice control to start & control playback. If you wish to use your phone app to control playback, please power cycle your Citation speaker and your phone."

Was this helpful? Thank you for your feedback!
Soundgear: how to reset

Switch the Soundgear ON. (If this is not possible, reset cannot be performed.)
Press and hold Volume + and Volume - simultaneously for longer than five seconds.
Soundgear switches OFF, and is now reset to factory settings.

Was this helpful? Thank you for your feedback!