How To

Support Overview / How To

How To

670 results

Sort

Page size

Setup instructions for Android
1. Power on your Harman Kardon Citation speaker.
2. Verify that you are connected to the right Wi-Fi network on your smartphone.
3. Enable Bluetooth
4. Enable Location services
5. Open your Google Home app
  1. Make sure you have permitted the Google Home app to view your location.
6. First option Tap Add Set up device Set up new devices in your home
7. Second option Tap X device found Select Home location
8. Follow the instruction on screen to add your new Harman Kardon Citation speaker.
Still not sure how to connect, then watch this video below:
Was this helpful? Thank you for your feedback!
Setup instructions for Apple iOS devices
1. Power on your Harman Kardon Citation speaker.
2. Verify that you are connected to the right Wi-Fi network on your smartphone.
3. Open your Google Home app .
4. Enable Bluetooth
5. First option Tap Add Set up device Set up new devices in your home
6. Second option Tap X device found Select Home location
7. Follow the instruction on screen to add your new Harman Kardon Citation speaker.
Still not sure how to connect, then watch this video below:
Was this helpful? Thank you for your feedback!
Singing while playing Bluetooth music

You can have your own Karaoke party with your JBL Partybox. Simply connect your Microphone (only included with the Partybox On The Go) and connect your mobile device over Bluetooth, then start playing music and sing along, it is that simple!

Was this helpful? Thank you for your feedback!
Sometimes, I am not able to connect JBL DRG with my smartphone.

Please check that you have connected your android phone with JBL DRG before. Power off your Android phone and press the JBL DRG BT button to connect to another smartphone. If this is the case, please wait 3 minutes for JBL DRG to setup the Bluetooth connection with a new smartphone. This is because some android phones can’t send a “Disconnect” BT command to JBL DRG during power off, so JBL DRG need to wait until the Link is lost.

Was this helpful? Thank you for your feedback!
Sometimes my Chromecast enabled streaming app cannot see my Citation speaker. What should I do?

"In certain network conditions, your speaker may not be visible from your streaming app. You can still use voice control to start & control playback. If you wish to use your phone app to control playback, please power cycle your Citation speaker and your phone."

Was this helpful? Thank you for your feedback!
Soundgear: how to reset

Switch the Soundgear ON. (If this is not possible, reset cannot be performed.)
Press and hold Volume + and Volume - simultaneously for longer than five seconds.
Soundgear switches OFF, and is now reset to factory settings.

Was this helpful? Thank you for your feedback!
Supported Platforms

The JBL Quantum 300 headset is compatible with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.
You can also use the included USB dongle on PC, PlayStation and Mac.

Was this helpful? Thank you for your feedback!
Supported Platforms

The JBL Quantum 400 headset is compatible via 3.5mm jack with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.
You can use the USB connection with PC, PS4, Nintendo Switch, and Mac.

Was this helpful? Thank you for your feedback!
Surge Protection Information

Yes. InfinityLab charger is designed with surge protection to keep your devices safe.

Was this helpful? Thank you for your feedback!
Sweatproof Information (IPX4)

This unit is IPX4 rated, which means that it is sweatproof (suitable for working out) and can withstand water splashes from any direction. However, the unit is not waterproof and should never be submerged in water.

Was this helpful? Thank you for your feedback!
Switching or Changing to a new Wireless Network
Switching to a new Wi-Fi network
1. Make sure your mobile device is connected to the same Wireless Network as your speaker.
2. Open your Google Home app
3. Go to Settings
4. Tap on Wi-FI Forget Network
  1. The current configuration is now forgotten.
5. In your Google Home app, you are forced back to the "Home Screen" and need to setup the device again.
6. Tap on
7. Find Add Set up device Set up new devices in your home
8. Follow the instructions given to add the speaker to your Wi-Fi network.
Lost connection or changed settings
1. Open the Google Home app
2. On the home screen, tap on AddSet up device Set up new devices in your home
3. Follow the instruction provided.
  1. Remember that your current room name is the same as before, as well as other settings made for the speaker. You are only switching to a new Wi-Fi.
4. In addition, you can click on Discovery in the bottom menu of the Google Home app.
5. Tap on the Setup The Card information would show your old speaker name. However, you can continue setting up the device following the instructions.
Was this helpful? Thank you for your feedback!
T110BT Headphones: Power and Pairing Information

To power on the headphones, place one of the headphones inside your ear and press and hold the center button on the inline mic. You should hear the audio chime and a blue blinking light should appear at the top of the inline mic. If this is your first time connecting to a device, it should immediately go into pairing mode. The device should recognize the T110BT headphone. Once you select that option, you will hear the confirmation tone. If you are trying to connect to a different device, turn the headphones on and press and hold for 3-5 seconds for the headphones to start searching for a different device. The headphones should appear on your discoverable devices within a few seconds. You should hear the audible tone and then the confirmation chime once it is connected. You will see the Bluetooth light alternate between red and blue when it is in pairing mode and then to a slow blinking LED blue light once it is connected to your device.

Was this helpful? Thank you for your feedback!