SCL-8

Product Specifications

General Specifications

Type: 2-Way In-ceiling loudspeaker

Low Frequency Driver: 5.25” (130 mm) advanced Aluminum Matrix cone cast-frame woofer (JW130Al-4)

High Frequency Driver: 1" (25 mm) 2410H-2 Teonex annular ring-diaphragm compression driver

Recommended Amplifier Power: 25 - 100 W RMS

Impedance: 4 Ohm

Loudspeaker Sensitivity: 85 dB/2.83V/1m (2pi anechoic)

Frequency Response: 55 Hz - 30 kHz (-6 dB on-axis), 2pi anechoic

Crossover Frequency: 1.8 kHz

High Frequency Coverage Angle (-6dB): 60° Vertical (Up

Enclosure Type: Open back

Controls: Boundary Proximity Control

Warranty: 5 Years

Shipping Units of Measure: Each

Grill Dimensions (Square): 10.77” (273 mm) x 10.77” (273 mm)

Grille Dimensions (Round): 10.77” (273 mm) Diameter

Product Dimensions (with grille): 10.77” H x 10.77” W x 4.73” D (273 mm x 273 mm x 120 mm)

Cut-out Diameter: 9.72” (247 mm)

Accessory Rough-in Bracket: CB8

Mounting Depth: 4.54” (115 mm)

Input Type: Gold-plated spring-loaded binding posts

Product Weight: 7.8 lb. (3.5 kg)

Shipping Weight: 10.6 lb. (4.8 kg)

The SCL-8 is the most compact round in-ceiling model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as a height channel or in-ceiling LCR or surround channel loudspeaker. The SCL-8 features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with an angled 5.25-inch (130mm) Advanced Aluminum Matrix cone cast-frame woofer operating behind an acoustic aperture waveguide. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 60 degrees from the listening position. The SCL-8 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in small to medium rooms.