Support Overview / Speakers / Speakers Professional / Column Speakers / Accessories / JBL CBT 70JE-1

JBL CBT 70JE-1

Extension for CBT 70J-1 Line Array Column Speaker

Documents & Downloads

Product Specifications

General Specifications

Components: Four (4) 130 mm (5 in) LF drivers

Frequency Range (-10 dB): 45 Hz – 700 Hz

Sensitivity (2.83V @ 1m): 90 dB full space, 96 dB half-space (65 Hz - 300 Hz)

Nominal Impedance: 8 ohms

Power Capacity: 500 W (2000 W peak), 2 hrs ; 350 W (1400 W peak), 100 hrs

Max SPL: 117 dB

Outdoor Capability: IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.

Mounting: Coupler plate joins the CBT70J-1 and 70JE-1 end-to-end. Threaded points on coupler plate accepts OmniMount™ 60.0 Series and 120.0 Series compatible wall-mount brackets, as well as points for the swivel (pan)/tilt wall bracket that is included with CBT 70J-1. Twelve (12) additional M6 mounting points accept forged shoulder steel eyebolts or swivel clips for suspension.

Included Accessories: Coupler plate

Optional Accessories: MTC-PC2 terminal panel cover ; MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm heavy duty speaker stand (must be heavy-duty stand for stability with this array) ; MTC-CBT-FM2 flush-mount low-profile wall-mount bracket

Dimensions (H x W x D): 27.4” x 6.7” x 9.3” (69.4 cm x 17 cm x 23.7 cm)

Weight: 18 lb (8.2 kg)

Dimensions

Net Weight: 8.2 kg (18 lb)

Design

Enclosure: Fiberglass-reinforced ABS cabinet, painted aluminum grille

Extension for CBT 70J-1 Line Array Column Speaker

The CBT 70JE-1 cabinet contains four low frequency drivers and a crossover network purposely designed for use in the CBT 70J-1 + 70JE-1 System, in a tough fiberglass-reinforced ABS enclosure. The 500W power handling and high sensitivity delivers powerful low frequency output. The drivers have lightweight dual magnet neodymium motors with 38 mm (1.5 in) diameter voice coils. The dual-magnet system provides maximum flux in a compact package. The magnet structure is magnetically shielded and the pole tips are magnetically saturated for lower flux modulation and minimum distortion. The 16 mm (0.63 in) long coils provides high linear drive and high power handling in a compact driver. The drivers feature damped blended surrounds and coated sealed paper cones found in high performance large format drivers. Drivers feature coated diaphragm materials to provide moisture, UV and salt resistance for outdoor capability. The thick, heavy-duty aluminum grille stands up to portable/event applications while allowing for rust-free installation outdoors.