JBL Link Bar

Product Specifications

General Specifications

Transducer: 2 x 20mm (0.8”) tweeter, 4 x (44x80)mm (1.7"x3.2”) racetrack driver

Total Maximum Power: 100W

Frequency response: 75Hz–20kHz

Signal-to-noise ratio: >85dBA

Power Supply: 100-240V~50/60Hz

Bluetooth version: 4.2

Bluetooth transmitter frequency range: 2402–2480MHz

Wireless network: 802.11a/b/g/n/ac (2.4GHz/5GHz)

Multi 4k video HDMI input

Chromecast built-in

Dimensions (W x H x D): 1020 x 60 x 93mm

Gross Weight: 4.4kg

Net Weight: 2.5kg

Note: LINK BAR is intended to be used for streaming music. A consumer can stream Bluetooth audio to the speaker. A consumer can connect their speaker to the local Wi-Fi Network and stream music with Google Chromecast. In addition, the speaker will work with Google Home. This product is designed to be instantly on and ready to play music at a moment's notice, therefore, the Bluetooth and Wi-Fi connection must remain active at all times to ensure proper operation.

LINK BAR is in compliance with the European Union energy legislation. LINK BAR complies with European Commission Regulation (EC) No 1275/2008 (HiNA and (EU) No 801/2013 as a networked equipment with high network availability equipment and equipment with HiNA functionality).

Power consumption:

Off Mode: N/A

Standby: N/A

Network Standby: N/A

Time to standby: N/A

Active Standby*: 5.5W

*Active Standby: LINK BAR is connected to a wireless network but does not provide active audio functions. when LINK BAR is plugged into a wall socket, regardless whether it is muted or not, words "Hey Google" or "Ok Google" it is automatically on active standby mode. It will respond to you if you say the trigger.

The smartest JBL soundbar yet with Android TV and the Google Assistant

JBL Link Bar is a voice-activated soundbar with Android TV and Google Assistant built-in. It turns any TV into a smarter TV, with legendary JBL sound performance. Just start with “Hey Google” to quickly find the latest blockbuster movie, check the score of the big game, or control your smart home — all with just your voice and without leaving what you're watching. 4K UHD support you will experience exceptional sound quality with vivid image quality. Simple to install, it connects to your TV with a single cable, creating an effortless setup. The Link Bar leverages JBL’s audio expertise in a smartly crafted audio system that is precisely tuned to deliver an impactful and exciting audio performance with crystal clear highs, silky smooth mid-band and tight bass from a one-piece soundbar.

One-piece soundbar with JBL legendary sound

Brings the best of JBL’s legendary sound to your smart TV with rich bass performance.

Android TV built-in

Android TV delivers a smarter viewing experience, find and watch programs more easily than ever.

Google Assistant

Search with your voice. Just say “Hey Google” to quickly find the latest blockbuster, check the score of the big game or dim the lights in a ‘hands-free’ experience.

PrivacySwitchTM for far-field microphone

Enables to mute your soundbar microphones for extra privacy and security protection when not using the Google Assistant.

Multiple 4K video HDMI inputs

With 3 HDMI inputs and 1 HDMI ARC output, the LINK BAR becomes a 4K entertainment hub for video or gaming devices, with just one cable connection to your TV.

Chromecast built-in

Let you instantly stream your favorite music, radio, or podcasts from your mobile device to your speakers.

Wireless Bluetooth streaming

Wirelessly stream high-quality sound from your smartphone or tablet.

FAQs & How-Tos

2 results

Sort

Page size

How to pair the Remote Control
We included a Remote Control in your box (I know, that's sweet of us), and you need to pair it with your LINK BAR before it is working.

This is how you will do it
1. Press the BLUETOOTH button on the LINK BAR
2. Now hold the BLUETOOTH button down for 3-5 seconds.
3. When you see "SEARCHING FOR ACCESSORIES" on your TV screen, release the BLUETOOTH button.
4. On your REMOTE press the HOME and BACK buttons at the same time.
5. A Green LED light will flash on the REMOTE to indicate that it is in pairing mode.
6. Keep holding down the buttons until you see a message on the TV screen that says, "Pairing remote control to LINK BAR" After 10 seconds, release.
7. If done successfully on your TV screen, you will see an indicator counting down that it will "pair" with your remote.
Enjoy your entertainment with few clicks away!

BONUS TIP: There is an Android app called Android TV that will turn your Smartphone into a Remote controller.
Was this helpful? Thank you for your feedback!
Learn how to troubleshoot when you can’t connect your Google Assistant device to your home Wi-Fi network.
The Checklist

Let us walk-through a list of things needed to ensure every requirement is met.
1. Check your mobile device if that is able to connect to same Wireless network.
2. Make sure you are within range of your Wireless router.
3. Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
4. Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
  1. You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
  2. You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
5. Try using a different mobile device, if you have one.
6. Reboot your Wireless network router and your mobile device.
Watch the video below for help with setting up your Google Assistant device.

Wireless Network Extender

Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.
1. Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
2. Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
3. Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
4. To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
5. In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
One Wireless Network Name (SSID)
1. You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
2. If the JBL LINK device is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
3. To solve this issue, using two different name for your extended network will help with the performance of the JBL LINK Speaker and Google Assistant request.
Was this helpful? Thank you for your feedback!