AVR 135

Power Requirements

AC 220 – 240V / 50Hz

Power Consumption

65W idle, 540W maximum (6 channels driven)

Digital Inputs (coaxial/optical)

2/2 on Rear; 1/1 on front

Analog Inputs

1 A/V on front panel

Analog Inputs

2 audio-only

Analog Inputs

3 A/V on rear panel

Analog Inputs

6-/8-channel input

Analog Inputs

tuner

On-Screen Display

Yes

Multizone Capability

No

Auto Setup

No

Remote Control

Seven-device, programmable remote

MSRP U.S.

$449.95 each

# of Amplifier Channels

6

Continuous Average Power (FTC) per Channel (stereo mode)

50 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms

Front L & R Channels

40 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Center Channel

40 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Surround Channels (L & R Side, Back)

40 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Input Level/Impedance

200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio

100dB (IHF-A)

Surround System Adjacent Channel Separation:

Dolby Pro Logic I and II

40dB

Dolby Digital

55dB

DTS

55dB

Frequency Response

10Hz – 130kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM)

Unmeasurable

Slew Rate

40V/µsec

Width

17.3 inches (440mm)

Height

6.6 inches (168mm)

Depth

15 inches (382mm)

Weight

24.4 lb (11.1kg)

Dimensions:

Television Format

NTSC/PAL

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1V/75 ohms

Video Frequency Response:

Composite and S-Video

10Hz – 8MHz (–3dB)

Component Video

10Hz – 50MHz (–3dB)

Frequency Range

AM... 520 – 1720kHz

Frequency Range

FM... 87.5–108.0MHz

Signal-to-Noise Ratio

AM... 45dB

Usable Sensitivity

FM... IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

FM... Mono/Stereo 70/68dB

Usable Sensitivity

AM... Loop 500µV

Distortion

AM... 1kHz, 50% Mod 0.8%

Distortion

FM... Mono/Stereo 0.2/0.3%

Selectivity

AM... ± 10kHz, 30dB

Stereo Separation

FM... 40dB @ 1kHz

Selectivity

FM... ± 400kHz, 70dB

Image Rejection

FM... 80dB

IF Rejection

FM... 90dB

Amplifier Power (RMS)

40 x 6 @ 8 ohms (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)

High Instantaneous Current Capability (HCC)

± 25 Amps