Présentation du centre d’assistance / Home Audio / Amplificateurs / Amplificateurs - Son surround / AVR 445

AVR 445

Audio/Video Receiver With Dolby Digital, DTS & HDMI 1.1 Switching (80 watts x 2 | 65 watts x 7)

Vendu à partir de 2006 jusqu’au 2007

Produit prédécesseur:	AVR 435
Produit successeur:	AVR 3550HD
Fait en:	China

Documents et téléchargements

Caractéristiques du produit

Caractéristiques Générales

Power Requirements: AC 120V/60Hz

Power Consumption: 120W Power On, idle, 1025W @ rated power output (7 channels driven)

Digital Inputs (coaxial/optical): 3/3 on Rear; 1/1 on front; 1 USB on rear

Analog Inputs: 1 A/V on front panel (switchable to output)

Analog Inputs: 2 audio-only

Analog Inputs: 4 A/V on rear panel

Analog Inputs: 6-/8-channel input

Analog Inputs: The Bridge Digital Media Player

Analog Inputs: tuner

On-Screen Display: Yes, including component video

Multizone Capability: Audio; A-BUS Ready; RS-232 serial control port; surround back channels assignable to remote zone; ZR 10 remote

Auto Setup: EzSet/EQ room equalization

Remote Control: Backlit, eight-device, programmable learning remote (2-line LCD display)

Shipping Weight (System, Accessories, Packing): 45 lb (20.4kg)

MSRP U.S.: $1299.95 each

Caractéristiques Audio

# of Amplifier Channels: 7

Stereo Mode:

Continuous Average Power (FTC) per Channel: 80 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms

Front L & R Channels: 65 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Center Channel: 65 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Surround Channels (L & R Side, L & R Back): 65 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 100dB (IHF-A)

Surround System Adjacent Channel Separation:

Dolby Pro Logic I and II: 40dB

Dolby Digital: 55dB

DTS: 55dB

Frequency Response: 10Hz – 130kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM): Unmeasurable

Slew Rate: 40V/µsec

Dimensions

Width: 17.3 inch (440mm)

Height: 6.5 inch (165mm)

Depth: 17.1 inch (435mm)

Weight: 39 lb (17.7kg)

Dimensions:

Carton Dimensions: 20.1 inch x 10 inch x 22.2 inch (510mm x 254mm x 565mm)

Spécifications vidéo

Television Format: NTSC

Input Level/Impedance: 1Vp-p/75 ohms

Output Level/Impedance: 1V/75 ohms

Video Frequency Response:

Composite and S-Video: 10Hz – 8MHz (–3dB)

Component Video: 10Hz – 60MHz (–3dB)

HDMI: Switching

Tuner Specifications

Frequency Range: AM... 520 – 1720kHz

Frequency Range: FM... 87.5 – 108.0MHz

Signal-to-Noise Ratio: AM... 45dB

Usable Sensitivity: FM... IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio: FM... Mono/Stereo 70dB/68dB

Usable Sensitivity: AM... Loop 500µV

Distortion: AM... 1kHz, 50% Mod 0.8%

Distortion: FM... Mono/Stereo 0.2%/0.3%

Selectivity: AM... ± 10kHz, 30dB

Stereo Separation: FM... 40dB @ 1kHz

Selectivity: FM... ± 400kHz, 70dB

Image Rejection: FM... 80dB

IF Rejection: FM... 90dB

Amplifier Specifications

Amplifier Power (RMS): 65 x 7 @ 8 ohms, (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)

High Instantaneous Current Capability (HCC): ± 40 Amps

Make the switch! With two-input HDMI; switching, XM-Ready and USB connections, and multiple digital and analog inputs (including The Bridge input), the AVR 445 is ready to handle all your sources. Digital decoding, bass management and EzSet/EQ technology transform the most complex system into an accurate, seamless sound field. A high-current amplifier and a wealth of features complete the package to switch your home theater to the inchperfect inch mode.