Présentation du centre d’assistance / Enceintes / Intégré au mur / plafond / ERS 110DT

ERS 110DT

2-Way 6-1/2 inch Round In-Ceiling Speaker with Dual Tweeters

Documents et téléchargements

Modes d’emploi

Notice d'utilisation (Anglais) 350.6 KB

Autre

Caractéristiques du produit

Caractéristiques Générales

Tweeters: Dual 3/4" CMMD

Total Power: 130 Watts

Sensitivity: 88dB

Finish: White

Technology: CMMD

Frequency Response: 47Hz – 22kHz (±3dB) 35Hz (-10dB)

Recommended Amplifier Power (RMS): 10 – 125 watts

Sensitivity (2.83 volts @ 1 meter): 88dB, both channels driven

Nominal Impedance: 8 ohms per input

Crossover Frequency(ies): 2,400Hz; 12dB/octave

Low-Frequency Transducer (Woofer): 6-1/2 inch (165mm) CMMD&#153 Dual voice coil

High-Frequency Transducer (Tweeter): Dual 3/4 inch (19mm) CMMD

Optional Accessories: Rough-In Frame... IW6R RIF

MSRP U.S.: $299.95 each

Caractéristiques Audio

Speaker Crossover Frequencies: 2,400Hz; 12dB/octave

Speaker Sensitivity: 88 dB

Speaker Frequency Response: 47Hz - 22kHz (±3dB) 35Hz (-10dB)

Speaker Nominal Impedance: 8 ohms

Speaker Maximum Recommended Amplifier Power: 125 W

Dimensions

Subwoofer Height (in): 9/3/2016

Speaker Weight (kg): 1.8

Subwoofer Weight (kg): 1.8

Speaker Weight (lb): 4

Subwoofer Weight (lb): 4

Subwoofer Height (mm): 233

Speaker Depth (in): 9/3/2016

Speaker Depth (mm): 233

Mounting Depth: 3-1/2 inch (89mm)

Weight: 4 lb (1.8kg)

Dimensions: Diameter... 9-3/16 inch (Dia.); (233mm)

Cutout Dimensions: Diameter... 7-7/8 inch (200mm)

The ERS 110DT is a round 2-way, dual voice coil, dual tweeter in-ceiling stereo speaker for use in a wide variety of applications, from stereo and whole-house music systems to complete home theaters. This speaker is perfect for applications where stereo sound is required but there is only space for a single speaker. The ERS 110DT incorporates Infinity's patented Ceramic Metal Matrix Diaphragm (CMMD;) technology to eliminate unwanted resonances and deliver clear, undistorted sound. The ERS 110DT also incorporates a proprietary waveguide design to ensure smooth distribution of sound throughout the listening area. The white grilles and frames are paintable and allow the speakers to blend into any decor.

Ceramic metal matrix diaphragms

Ceramic Metal Matrix Diaphragms reveal all the nuances of today’s music and film recordings by virtually eliminating unwanted resonances. The key is a ceramic compound called alumina. Three times as stiff as titanium – and 85 times stiffer than felted paper – alumina is deepanodized to an aluminum core to create a three-layer sandwich. CMMD adds bass impact to each ERS model, and delivers open, detailed and clean mid and high frequencies.

Easy to install

The ERS models feature mounting clamps that swing out to securely grip your wall from the inside. Because they need not be mounted to a stud, the ERS speakers can be placed for optimal sonic performance and installation ease.