JBL CBT 50LA-LS
Line Array Column Loudspeaker with EN54:24 Certification
Familiarisez-vous avec votre $produit
Documents et téléchargements
Caractéristiques du produit
- Components
- Eight 50 mm (2 in) Full-Range
- Frequency Range (-10 dB)
- 120 Hz – 20 kHz
- Coverage Pattern
- Vertical 20° (1.5 kHz - 16 kHz, ±10°) ; Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°)
- Sensitivity (2.83V@ 1m)
- 93 dB (speech mode, 2 kHz - 14 kHz) ; 89 dB (music mode, 300 Hz - 18 kHz)
- Nominal Impedance
- 8 ohms
- Power Capacity (8 ohm setting)
- 150W (600W peak), 2 hrs ; 100 W (400W peak), 100 hrs
- Max SPL (Speech mode)
- 115 dB cont ave (121 peak)
- Max SPL (Music mode)
- 111 dB cont ave (117 peak)
- 70V/100V Transformer Taps
- 60W, 30W, 15W, (7.5W at 70V only), and 8Ω thru, via switch
- Outdoor Capability
- IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.
- Insert Points
- Ten M6 insert points on back panel.
- Mounting
- Included swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.
- Safety Agency Rating
- EN54-24:2008 certified (Certificate No. 0359-CPR-00238), when installed with MTC-PC2 terminal panel cover. In accordance with the requirements of IEC60849/EN60849.
- Included Accessories
- Swivel (pan) / tilt wall bracket ; MTC-PC2 terminal panel cover
- Optional Accessories
- MTC-CBT-FM1 flush-mount low-profile wall-mount bracket ; MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand
- Height
- 528 mm (20.8 in)
- Width
- 99 mm (3.9 in)
- Depth
- 153 mm (6.0 in)
- Net Weight
- 4.1 kg (9.0 lb)
- Enclosure
- Fiberglass reinforced ABS cabinet, painted aluminum grille
Line Array Column Loudspeaker with EN54:24 Certification
The CBT 50LA-LS, with Constant Beamwidth Technology™, represents a breakthrough in pattern control, utilizing analog delay beamforming and amplitude tapering to accomplish consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor passive column speakers. The slim, compact design fits well into virtually any architectural decor. The combination of superb sound quality, excellent pattern control, and compact design makes CBT 50LA-LS ideal for a wide variety of applications, such as retail stores, concourses, transit spaces, fill applications, conference rooms, architectural spaces, audio for video, lecture halls, and other applications where such a combination is desired. The voicing can be set to match the application through the Music/Speech switch, conveniently located on the side of the cabinet. The Music setting provides flat frequency response, while the Speech setting produces a mid-range presence boost to provide clear, intelligible speech even at the longest throw distances. The drivers feature dual neodymium magnets for light weight. Copper-capped pole pieces lower both the driver inductance and the flux modulation. This increases high frequency extension and reduces distortion at high drive levels. Butyl rubber surrounds provide long life even in high humidity environments. The drivers are shielded. Dynamic SonicGuard™ minimizes distortion at high drive levels by limiting low frequency excursion dynamically. This maximizes clarity at high drive levels while protecting the drivers from damage due to overpowering. A swivel (pan) / tilt wall-mount bracket is included and ten M6 inserts on the back panel fit the spacing of common mounting brackets, or can be utilized to suspend the speaker using M6 forged shoulder steel eyebolts, providing versatility of installation. CBT 50LA-LS can be installed either indoors or outdoors. The drivers are weathertreated, the fiberglass reinforced ABS cabinet with UV resistant paint is excellent for outdoor applications, external screws are stainless steel, and the painted aluminum grille resists rusting in the harshest conditions.
Images et vidéos
Vous ne trouvez pas ce que vous recherchez ?
Appelez-nous
Appelez-nous dès maintenant au :
+32 (0) 28080136
Lundi - Vendredi: 09:00-18:00
Samedi - Dimanche: 10:00-16:00
Envoyez-nous un e-mail
Nous sommes disponibles du lundi au dimanche pour répondre à votre e-mail aussi vite que possible !
Envoyez-nous un e-mailDiscutez avec nous
Lundi - Vendredi: 09:00-18:00
Samedi - Dimanche: 10:00-16:00