ERS 310

ERS 310

2-Way 8 inch Round In-Ceiling Speaker

Downloads

Product Specificaties

Mounting Depth
4-1/4" (108mm)
Finish
White
Technology
CMMD
Frequency Response
45Hz – 22kHz (±3dB) 29Hz (-10dB)
Recommended Amplifier Power (RMS)
10 – 135 watts
Sensitivity (2.83 volts @ 1 meter)
89dB
Nominal Impedance
8 ohms
Crossover Frequency(ies)
2,300Hz; 12dB/octave
Low-Frequency Transducer (Woofer)
8 inch (200mm) CMMD
High-Frequency Transducer (Tweeter)
1 inch (25mm) CMMD
Optional Accessories
Rough-In Frame... IW8R RIF
MSRP U.S.
$239.95 each
Speaker Nominal Impedance
8 ohms
Speaker Sensitivity
88 dB
Speaker Crossover Frequencies
2,300Hz; 12dB/octave
Speaker Frequency Response
45Hz - 22kHz (±3dB) 29Hz (-10dB)
Speaker Depth (in)
10/7/2008
Subwoofer Weight (kg)
2.5
Subwoofer Height (in)
10/7/2008
Speaker Weight (lb)
5.6
Speaker Depth (mm)
276
Subwoofer Weight (lb)
5.6
Subwoofer Height (mm)
276
Speaker Weight (kg)
2.5
Mounting Depth
4-1/4 inch (108mm)
Weight
5.6 lb (2.5kg)
Dimensions
7 x 7 x 2-9/16
Dimensions
Diameter... 10-7/8 inch (276mm)
Cutout Dimensions
Diameter... 6 inch
Cutout Dimensions
Diameter... 9-1/2 inch (241mm)

The ERS 310 is a round 2-way in-ceiling speaker for use in a wide variety of applications, from stereo and whole-house music systems to complete home theaters. The ERS 310 incorporates Infinity's patented Ceramic Metal Matrix Diaphragm (CMMD;) technology to eliminate unwanted resonances and deliver clear, undistorted sound. The ERS 310 also incorporates a proprietary waveguide design to ensure smooth distribution of sound throughout the listening area. The white grilles and frames are paintable and allow the speakers to blend into any decor.

Ceramic Metal Matrix Diaphragms reveal all the nuances of today’s music and film recordings by virtually eliminating unwanted resonances. The key is a ceramic compound called alumina. Three times as stiff as titanium – and 85 times stiffer than felted paper – alumina is deepanodized to an aluminum core to create a three-layer sandwich. CMMD adds bass impact to each ERS model, and delivers open, detailed and clean mid and high frequencies.
The ERS models feature mounting clamps that swing out to securely grip your wall from the inside. Because they need not be mounted to a stud, the ERS speakers can be placed for optimal sonic performance and installation ease.
Optional rough-in frames are available for use in new-construction installations before drywall is installed.

Kan je niet vinden wat je zoekt?

Bel onze support-afdeling

Bel onze support-afdeling

Bel ons nu op: +32 (0) 28080136

Maandag - Vrijdag: 09.00-18.00
Zaterdag - Zondag: 10:00-16:00

Stuur een email aan onze support-afdeling

Stuur een email aan onze support-afdeling

We zijn er van maandag t/m zondag om je vragen zo snel mogelijk te beantwoorden!

Stuur ons een email
Chat met onze support-afdeling

Chat met onze support-afdeling

Chat is open op werkdagen tussen 09:00 en 18:00 en van 10:00 - 16:00 in het weekend.

message

WhatsApp Ons

Stuur ons een bericht hier 

Maandag - vrijdag: 09.00-18.00
Zaterdag - Zondag: 10:00-16:00