The skinny on resounding bass with 2-ohm impedance.
The skinny on resounding bass with 2-ohm impedance.
The JBL® MS-10SD2 SLIM subwoofer is a 10-inch (250-millimeter), high-performance subwoofer. It has minimal installation depth – just 2-3/8 inches (60 millimeters). Its dual 2-ohm voice-coil design permits a variety of connection options. Its advanced components include a reinforced flat-piston polypropylene cone, progressive spider, dual-roll fabric surround and nonmagnetic, cast-aluminum frame. Power handling of 250 watts RMS (1,000 watts peak) makes this subwoofer an excellent choice for virtually any system configuration.
JBL engineers designed the MS-10SD2 SLIM shallow-mount subwoofer to produce exceptional, robust bass from an amplifier capable of delivering up to 1000 watts of power.
The MS-10SD2 SLIM subwoofer requires just 2-3/8 inches (60 millimeters) of installation depth, little more than the height of a credit card. This minimal installation depth vastly increases the number of places where you can install this sub. Under seats, in rear-seat or trunk side panels (with custom enclosures), or behind a truck seat against a cab wall – wherever you want to put this subwoofer, it requires very thin installation depth.
A subwoofer cone is a diaphragm of a piston that moves air. JBL® engineers reconfigured a traditional conical diaphragm as flat, rigid polypropylene material that fits in the compact MS-10SD2 SLIM subwoofer chassis and has a lightweight and stiff composition when moving air. The result is an effective low-frequency diaphragm that reduces unwanted mechanical distortion under movements up to its linear-excursion (Xmax) limits.
A dual-roll laminated composite surround in the MS-10SD2 SLIM subwoofer offers a low profile and tremendous UV (ultraviolet) resistance. Its polyurethane/fabric blend exerts additional restoring force on the cone at high excursion, making its low-distortion bass even better.
Like its surround, the MS-10SD2 SLIM’s progressive spider allows a progressively more resistive force as the cone reaches higher excursion. It also helps to keep the voice coil centered in the magnetic gap during the delivery of the important bass notes.
A proprietary cast-aluminum frame on the MS-10SD2 SLIM subwoofer ensures a rigid chassis for the speaker’s moving parts. Since cast aluminum is nonmagnetic, more of the speaker’s own magnetism is focused on the voice coils to control the rapid, piston-like movement of the cone and reproduce even the most complex bass sounds faithfully.
Dual voice coils in MS-10SD2 SLIM subwoofers offer the best range of wiring and system configuration options. Wire the voice coils in series for a 4-ohm load. Wire the voice coils in parallel for a 1-ohm load. When you’re using multiple subwoofers, the dual voice-coil configurations allow dual, triple and even quad subwoofer designs that match perfectly with the optimum amplifier load.
JBL engineers went off the charts for this revolutionary high-Q design with a very low compliance (Vas) to offer extremely effective bass performance in a small space. The low, easily moving compliance of the suspension, combined with the innovative surround and progressive spider to control cone movement as excursion is increased, gives the MS-10SD2 SLIM sub design unique mechanical attributes that revise conventional subwoofer thinking. It’s yet another way that JBL engineering expertise means exceptional performance.
The MS-10SD2 SLIM subwoofer provides amazing bass from a very modest enclosure volume. We recommend just 0.5 cubic feet (14,16l cubic centimeters) for sealed designs and 1.0 cubic feet (28,32l cubic centimeters) for vented designs. Vented enclosures will provide greater output given the same power, so the vented enclosure will work with smaller amplifiers.
MS-10SD2 SLIM subwoofers feature spring-loaded connection terminals for both voice coils, ensuring ease of connection via a variety of wire-gauge sizes. The sub’s push terminal also makes easy work of connecting series or parallel voice coils, or wiring to other subwoofers.
Imagens e Vídeos
Não encontrou o que estava procurando?
Telefone
Fale com um especialista em produtos
Ligue para:
0800 571 4161
0800 571 4161 (Ligação gratuita para Telefone Fixo)
(41) 3012-6100 (Custo de ligação Local / Interurbana)
Segunda a Sexta das 08h às 18h, exceto feriados
Chat
Segunda a Sábado das 08h às 18h, exceto feriados
Nossos especialistas em produtos estão prontos para ajudá-lo em tempo real. Converse com eles hoje.
Não há agentes de chat disponíveis no momento. Por favor contate-nos por email ou telefone.
WhatsApp
Nos envie uma mensagem através do número (41) 2169-6702 ou clique no link:
