Home Suporte / Home Audio / Receptores / Receptores - Som Surround / AVR 300

AVR 300

Audio/Video Receiver With Dolby Digital & DTS (60 watts x 2 | 50 watts x 5)

Vendido de 1999 até 2000

Produto anterior:	AVR 35
Produto sucessor:	AVR 310
Feito em:	Hong Kong

Documentos & Downloads

Manuais

Manual do Proprietário (Inglês)

Especificações de Produto

Especificações Gerais

Power Requirements: 120V AC/60Hz

Power Consumption: 72W idle, 694W maximum (2 channels driven)

Surround System Adjacent Channel Separation: Pro Logic Decoding... 40dB

Surround System Adjacent Channel Separation: Dolby Digital... 55dB

Surround System Adjacent Channel Separation: DTS... 55dB

MSRP U.S.: $699.95 each

Especificações de Áudio

Surround Modes: Dolby Digital, DTS surround, Harman's VMAx

Digital Inputs (coaxial/optical): 6

Digital Output: 2

Dimensões

Dimensions (H x W x D): Width 17-5/16 inch (440mm)

Dimensions (H x W x D): Height 6-1/2 inch (165mm) Height measurement includes feet and chassis.

Dimensions (H x W x D): Depth 17-1/8 inch (435mm) Depth measurement includes knobs, buttons and terminal connections.

Weight: 31lbs ( 14.1kg)

Video Specifications

Television Format: NTSC

Input Level/Impedance: 1Vp-p/75ohms

Output Level/Impedance: 1V/75 ohms

Video Frequency Response: 10Hz – 8MHz (-3dB)

Tuner Specifications

Frequency Range: AM... 520 – 1710kHz

Frequency Range: FM... 87.5 – 108MHz

Signal-to-Noise Ratio: AM... 45dB

Usable Sensitivity: FM... IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio: FM... 70dB

Usable Sensitivity: AM... Loop 500µV/M

Distortion: AM... 1kHz, 50% Mod 0.8%

Signal-to-Noise Ratio: FM... 68dB Stereo ( measured at amV RF Input Level)

Distortion (Mono/Stereo): FM... 0.3%/0.3%

Selectivity: AM... ± 10kHz, 30dB

Stereo Separation: FM... 40dB @1kHz

Selectivity: FM... ± 400kHz, 65dB

Image Rejection: FM... 80dB

IF Rejection: FM... 90dB

Tuner Output Level: FM... 1kHz, ±75kHz Dev 500mV

Amplifier Specifications

Continuous Average Power (FTC) per Channel (stereo mode): 60 watts per channel @<0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms

Continuous Average Power (FTC) per Channel (surround modes): 50 watts per channel @<0.07% THD, 20Hz – 20kHz, all channels driven into 8 ohms

High Instantaneous Current Capability (HCC): ± 35 Amps

Input Level/Impedance: 250mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 95dB

Frequency Response: 10Hz – 100kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM): Not Measurable

Rise Time: 16µsec

Slew Rate: 40V/µsec

High-Current (+/-35 Amps), Utrawide-Bandwidth (10Hz-100kHz)Amplifier Design Effortlessly Powers the Most Dynamic Digital Sources. Dolby Digital On Board Using Advanced Crystal DSP Engine. 24-Bit/96kHz D/A Converters for Superior Digital Decoding. 6-Channel Direct Inputs for Use with External Surround Decoders.