GRAND TOURING GTO 1004

GRAND TOURING GTO 1004

600-Watt 4-Channel Full-Range Amplifier (100W RMS x 4 Channels at 4 Ohms)

Sold from 2007 until 2011

Predecessor Product: GRAND TOURING GTO 75.4 II
Successor Product: MS-A1004
Made in: China

Getting started with your GRAND TOURING GTO 1004

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Series
GTO
Number of Channels/Type
4 channels
Amplifier Power (RMS)
100W x 4 Channels @ 4 ohms
Amplifier Power (RMS)
150W x 4 Channels @ 2 ohms
Amplifier Power (RMS)
320W x 2 Channels @ 4 ohms
Signal-to-Noise Ratio
104dBA (reference rated power into 4 ohms)
Total Harmonic Distortion
0.02% (rated power @ 4 ohms)
Total Harmonic Distortion
≤1% (bridged 2 channel mode)
Frequency Response
10Hz – 100kHz (-3dB)
MSRP U.S.
$424.95 each
THD + N
0.05%10
Frequency Response
(-3dB) 10Hz–100kHz
Signal-to-Noise Ratio
104dBA
2-Ohm Power Output
150W
4-Ohm Power Output
100W
Total Peak Power Output
600W
Width (mm)
263
Depth (in)
18-9/16
Height (in)
2-1/8
Depth (mm)
470
Width (in)
10-3/8
Height (mm)
53
Dimensions
(L x W x H) 18-9/16 inch x 10Hz – 3/8 inch x 2-1/8 inch

The JBL® GTO1004 is a great way to boost the power of your current car audio system. It’s a compact, 600-watt, four-channel, full-range amplifier with variable electronic crossover and bass boost. It’s engineered for optimum power delivery with low distortion. It has an aluminium heatsink for improved thermal performance. Its 10 Hz to 100 kHz frequency response is exceptionally wide. It comes with a 12 dB-per-octave electronic crossover that lets you optimise tuning based on speaker location and accompanying loudspeaker components. And its full-range preamp outputs enable multiple amplifier hookups without requiring you to use high-loss Y-adapters or signal splitters. Want more power? Just add a pair of JBL® GTO Series loudspeakers.

The JBL® GTO1004 full-range amplifier can wield a formidable 150 watts through each of its four channels. But don’t worry about all that power making anything overheat. The GTO1004 has an aluminum heatsink to keep the temperature under control.
The JBL® GTO1004 has a 12dB-per-octave electronic crossover – variable from 32Hz to 320Hz – that lets you optimize your car audio system’s tuning (based on the system’s components and their location). The transition from bass to higher frequencies is under your command.
For drivers who want to control the power of their car audio system’s lowest tones, the JBL® GTO1004 offers a bass-boost control. Adjust the bass by up to 6dB – or leave it alone. The power is all yours.
An amplifier is meant to connect to other components, and the JBL® GTO1004’s high-quality, Direct-Connect terminals provide connections that you can trust. Its full-range preamp outputs permit multiple hookups without requiring high-loss Y-adapters or signal splitters.
The JBL® GTO1004’s 10Hz to 100kHz frequency response stretches above, through and below the range of human hearing to capture everything that your audio sources offer. From symphonies to rap, there’s no sound that the GTO1004 can’t handle.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)