Support Überblick / Home Audio / Verstärker / Multi-Kanal / PA 2000

PA 2000

4-Channel Power Amplifier (45 watts x 4 | 100 watts x 2)

Verkauft von 2000 bis 2004

Hergestellt in:	South Korea

Dokumente & Downloads

Benutzerhandbücher

Bedienungsanleitung (Englisch) 143.28 KB

Anderes

Produktprospekt (Englisch) 136.6 KB

Produktdetails

Allgemeine Spezifikationen

Power Output, Normal Mode: 4 x 45 Watts @ 8 ohms, 20Hz – 20kHz, <0.07% THD, all channels driven

Power Output, Bridged Mode: 2 x 100 Watts @ 8 ohms, 20Hz – 20kHz, <0.07% THD, all channels driven

Frequency Response: <1Hz – 170kHz (-3dB @ 1 watt)

Signal-to-Noise Ratio: 110dB @ Rated power 45 watts

Total Harmonic Distortion: Less than 0.07% @ rated output

Power Bandwidth: <1Hz – 100kHz

Input Impedance: 47k ohms

Input Sensitivity: 1 Volt for rated output

Remote Trigger Voltage: 3 – 30 Volts AC/DC

Remote Trigger Impedance: 20k ohms

Power Requirements: AC 120V/50 – 60Hz

Power Consumption: 260 Watts maximum

MSRP U.S.: $599.95 each

Abmessungen

Weight: 25.3 lb (11.4kg)

Dimensions (H x W x D): 6-1/8 inch x 17-3/8 inch x 15-3/4 inch (155mm x 442mm x 400mm)

Amplifier Specifications

High Instantaneous Current Capability (HCC): ± 45 Amps

Add remote rooms or additional channels to an existing surround system with this high-current, bridgeable amplifier. Fan-free for ultraquiet operation, the PA 2000's design is optimized for the requirements of the long signal paths found in multiroom systems.