Présentation du centre d’assistance / Home Audio / Amplificateurs / Amplificateurs - Son surround / AVR 45

AVR 45

Audio/Video Receiver With Dolby Digital (65 watts x 2 | 55 watts x 5)

Vendu à partir de 1998 jusqu’au 1999

Produit prédécesseur:	AVR 40
Produit successeur:	AVR 210
Fait en:	Hong Kong

Documents et téléchargements

Modes d’emploi

Notice d'utilisation (Anglais) 373.98 KB

Caractéristiques du produit

Caractéristiques Générales

Power Requirements: 120V AC/60Hz

Surround System Adjacent Channel Separation: Pro Logic Decoding... 40dB

Power Consumption: 72W idle, 332W maximum (2 channels driven)

Surround System Adjacent Channel Separation: Dolby Digital... 55dB

Frequency Response: 8Hz – 80kHz (+1/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM): Not Measurable

Rise Time: 16µsec

Slew Rate: 40V/µsec

MSRP U.S.: $899.95 each

Caractéristiques Audio

Front L & R Channels: 55 watts per channel, @ 0.07% THD, 20Hz – 20kHz into 8 ohms

Center Channel: 55 watts per channel, @0.07% THD, 20Hz – 20kHz into 8 ohms

Rear Channels:: 55 watts per channel, @0.07% THD, 20Hz – 20kHz into 8 ohms

Dimensions

Dimensions (H x W x D): Width 17-1/3 inch (440mm)

Dimensions (H x W x D): Height 6-1/2 inch (165mm) Height measurement includes feet and chassis.

Dimensions (H x W x D): Depth 17-1/10 inch (435mm) Depth measurement includes knobs, buttons and terminal connections.

Weight: 25lbs ( 13.2kg)

Spécifications vidéo

Television Format: NTSC

Input Level/Impedance: 1Vp-p/75 ohms

Output Level/Impedance: 1V/75 ohms

Video Frequency Response: 10Hz to 8MHz (-3dB)

Tuner Specifications

Frequency Range: AM... 520 – 1710kHz

Frequency Range: FM... 87.5 – 108MHz

Signal-to-Noise Ratio: AM... 45dB

Usable Sensitivity: FM... IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio: FM... 70dB Mono ( measured at amV RF Input Level)

Usable Sensitivity: AM... Loop 500µV

Distortion: AM... 1kHz, 50% Mod 0.8%

Signal-to-Noise Ratio: FM... 68dB Stereo ( measured at amV RF Input Level)

Distortion (Mono/Stereo): FM... 0.3%/0.5%

Selectivity: AM... ± 10kHz, 30dB

Stereo Separation: FM... 40dB @1kHz

Selectivity: FM... ± 400kHz, 65dB

Image Rejection: FM... 80dB

IF Rejection: FM... 90dB

Tuner Output Level: FM... 1kHz, ±75kHz Dev 500mV

Amplifier Specifications

Continuous Average Power (FTC) per Channel (stereo mode): 65 Watts per channel 20Hz – 20kHz... @<0.07% THD, both channels driven into 8 ohms

High Instantaneous Current Capability (HCC): ± 35 Amps

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 95dB

Advanced Dolby Digital Performance at a moderate price. The AVR 45 offers HCC capability and Ultrawide Bandwidth design, and the advanced Crystal Circuit for extraordinary performance, rivaled only by top of the line conventional receivers. Prior season's model.