Présentation du centre d’assistance / Enceintes / Stéréo & Son Surround / Caissons d’extrêmes graves / SUB140P
SUB140P

SUB140P

Add high-impact bass to any home theatre

Vendu à partir de 2011 actuellement

Familiarisez-vous avec votre $produit

Product Registration

Enregistrer votre produit

Possédez-vous ce produit ? Enregistrez-le ici ! Et faites facilement une réclamation sous garantie ou une demande d’intervention

Enregistrez votre appareil dès maintenant

Documents et téléchargements

Caractéristiques du produit

Series
Studio Series
Finish
Black
Enclosure Type
Ported (down-firing)
Power Consumption(Full Power/Idle)
300w (2.5A@120V) peak
Frequency Response
32Hz - 200Hz (-6dB)
Height (in)
14
Weight (kg)
10
Weight (lb)
22
Width (mm)
178
Width (in)
18-14/16
Depth (in)
14
Height (mm)
365
Depth (mm)
365
Connections
RCA line-level and LFE inputs
Controls
Volume level, crossover frequency. phase
Power Requirement
120V 60Hz (US); 220V-230V, 50Hz/60Hz (EU)
Power Consumption (Standby)
less than 1W (8mA@120V)
Low-Frequency Transducer
8" (200mm) cone (down-firing)

Listen with more than just your ears.

Powered subwoofers bring visceral excitement to film soundtracks, and are an indispensable component of any serious home theatre system. But too many are too big. They dwarf other system components. And many front-firing systems require special placement within a room for even basic, decent performance. But the JBL® SUB140P is different. It’s an 8-inch (200 mm), 150W down-firing powerhouse that pounds out high-impact, low-distortion bass from a trapezoidal bass-reflex enclosure that fits just about anywhere. It connects to virtually any A/V receiver and works with virtually any speakers. Heighten your film experiences at home – easily.

The Studio SUB140P features an 8-inch (200-millimeter) low-frequency transducer that delivers chest-thumping audio – but it’s accurate enough to articulate individual sounds at sustained low frequencies. Such immersive bass creates a foundation that is powerful enough to support an entire surround-sound experience.
The Studio SUB140P subwoofer’s 150-watt RMS amplifier means that the sub can develop high-energy sound levels without adding unwanted artifacts. A built-in limiter prevents the distortion that results from sudden peak levels and thereby turns a sound experience from the merely impressive into the completely immersive.
Energy efficiency is a priority; so too is low heat output. The Studio SUB140P’s built-in digital amplifier fulfills both functions but doesn’t skimp on your primary requirement: powerful low-frequency sound.
Unlike other subwoofers, the Studio SUB140P is not housed within a sealed enclosure. Instead, the SUB140P features a bass-reflex enclosure, which provides movie soundtracks and music with the breathing room they need to sound realistic with little or no distortion.
The Studio SUB140P’s driver fires downwards instead of outwards, a configuration that prevents unwanted interaction with walls and the sound reflections that result from the interaction. Instead, sound travels upwards through the room, resulting in clean, crisp bass. As a result, you can place the SUB140P anywhere in a room without worrying that it’ll produce the artificial “boominess” that can detract from the realism of a surround-sound experience.
A two-position phase switch ensures that the Studio SUB140P’s bass transducer moves in sync with your main loudspeakers. The subwoofer’s low frequencies will blend seamlessly with sounds from other speakers, regardless of where you put the subwoofer. Also, an adjustable crossover frequency lets you optimize the Studio SUB140P for different choices of main/satellite loudspeakers.
A choice of LFE (low-frequency effects) or line-level inputs means that you can either use or bypass the Studio SUB140P subwoofer’s internal crossover circuits. Such an option provides greater flexibility in how you set up and use the SUB140P, while it ensures noise-free connections to virtually any type of AV amplifier or sound center.
The JBL Weave design is a perfect convergence of form and function. Able to stand out or blend in with the finest décor, the Weave makes the Studio SUB140P’s trapezoidal enclosure is as functional as it is pleasant to the eye.

Images et vidéos

SUB140P - Black - Downward-firing, 8" (200mm) subwoofer with built-in 150W amplifier - Hero
  • SUB140P - Black - Downward-firing, 8" (200mm) subwoofer with built-in 150W amplifier - Hero
  • SUB140P - Black - Downward-firing, 8" (200mm) subwoofer with built-in 150W amplifier - Front

Vous ne trouvez pas ce que vous recherchez ?

Appelez-nous

Appelez-nous

Appelez-nous dès maintenant au : +41 225 912 934

Lundi - Vendredi: 09:00-18:00
Samedi - Dimanche: 10:00-16:00

Envoyez-nous un e-mail

Envoyez-nous un e-mail

Nous sommes disponibles du lundi au dimanche pour répondre à votre e-mail aussi vite que possible !

Envoyez-nous un e-mail
Discutez avec nous

Discutez avec nous

Lundi - Vendredi: 09:00-18:00
Samedi - Dimanche: 10:00-16:00

message

Contactez-nous par WhatsApp

Envoyez-nous un message ou cliquez- ici 

Lundi - Vendredi: 09.00-18.00
Samedi - Dimanche: 10:00-16:00