SUB 550P

SUB 550P

500W, 10-inch powered subwoofer

Vendu à partir de 2011 actuellement

Familiarisez-vous avec votre $produit

Product Registration

Enregistrer votre produit

Possédez-vous ce produit ? Enregistrez-le ici ! Et faites facilement une réclamation sous garantie ou une demande d’intervention

Enregistrez votre appareil dès maintenant

Documents et téléchargements

Caractéristiques du produit

Enclosure Type
Sealed (forward-firing)
Finish
Black
Frequency Response
27Hz-150Hz
Height (mm)
379
Height (in)
14-29/32
Weight (kg)
23
Weight (lb)
50
Width (mm)
444
Depth (mm)
380
Depth (in)
41-31/32
Width (in)
17-1/2
Controls
Crossover frequency, Volume level, Phase
Amplifier Power (Peak)
500W
Power Consumption (Standby)
less than 6W (120V), less than 0.55W (230V)
Power Consumption (Full Power/Idle)
360W - 3.8A (120V), 395W - 2.1A (230V)
Amplifier Power (RMS)
300W
Power Requirement
120V, 60Hz (US); 220V-230V, 50Hz/60Hz (EU)
Maximum Recommended Amplifier Power
500 (300 RMS)
Low-Frequency Transducer
10" (250mm) PolyPlas cone, cast basket

Muscular sound from a 10" (250mm) subwoofer with built-in 300W RMS amplifier.

Bass is the foundation of great sound. You don’t just hear it in your ears; you also feel it from the top of your head to the bottom of your feet. JBL® subwoofers are built to maximize such a feeling as well as enhance your entire experience of sound. The same JBL sound engineers who designed the playback systems for many of the world’s top concert venues, recording studios and THX®-equipped movie theaters have optimized their technologies and materials in the Studio 550P subwoofer to play with just about any home system. This subwoofer incorporates your entire body into an enveloping bass experience. The 550P outputs astonishingly realistic and immersive low-frequency sound via a forward-facing, 10-inch (250-millimeter) transducer mounted inside a rigid yet light PolyPlas™ cast-aluminum cone frame. This is the kind of powerful, low-distortion bass that you can feel from skin to ear to chest cavity, and one that practically transports you to the very environment that you are hearing. The Studio 550P truly places you at the center of the experience, right in your living room.

A 300-watt RMS (500 watts peak power) amplifier lets you play your Studio 550P subwoofer at body-quaking levels without any room-vibrating reverb or excessive heat output. A built-in limiter extends this ability by preventing distortion that can arise out of sudden peaks, taking the audio from merely impressive to completely immersive.
The Studio 550P features a 10-inch (250-millimeter) cone made from lightweight yet rigid PolyPlas cone material. For the listener, this structure means powerful heart-thumping bass with such low distortion that individual sounds remain both accurate and articulate, even at sustained low frequencies. This is the kind of bass that takes surround sound from simply a listening experience to a seemingly tangible, robust environment.
Power and accuracy normally do not go hand in hand. The Studio 550P, however, is by no means a mere normal subwoofer. It features a sealed enclosure that acts to control the woofer cone’s motion, thus providing consistent, reliable sound that remains smooth and rich even at the deepest of frequencies.
The Studio 550P places you in the center of the action by sending the action straight at you via a powerful, forward-firing cone. Sound travels directly to your ears without reverberating off the walls or bending around the furniture. This is bass in its most potent form, from a subwoofer versatile enough to be placed in the middle of the room or against a wall.
A phase switch ensures that the action of the Studio 550 subwoofer’s transducer moves in sync with your main speakers. As a result, the subwoofer’s low frequencies blend seamlessly with the sound coming from the main speakers, regardless of where you place the subwoofer in a room. Furthermore, an adjustable crossover-frequency control lets you optimize the subwoofer for a variety of main/satellite speaker choices.
A choice of LFE and line-level inputs lets you either use or bypass the subwoofer’s internal crossover circuits for bass-boosting versatility. This option provides greater flexibility in how you use the Studio 550P while ensuring noise-free connections to virtually any type of audio/video amplifier.
Unwanted interaction between the subwoofer and the floor can cause distortion – but the Studio 550P includes an array of metal spikes to reduce distortion. The use of such spikes also creates clean sound by placing a cushion of air between the speaker and anything that could potentially disturb its pristine low-frequency waves.

Vous ne trouvez pas ce que vous recherchez ?

Appelez-nous

Appelez-nous

Appelez-nous dès maintenant au : +41 225 912 934

Lundi - Vendredi: 09:00-18:00
Samedi - Dimanche: 10:00-16:00

Envoyez-nous un e-mail

Envoyez-nous un e-mail

Nous sommes disponibles du lundi au dimanche pour répondre à votre e-mail aussi vite que possible !

Envoyez-nous un e-mail
Discutez avec nous

Discutez avec nous

Lundi - Vendredi: 09:00-18:00
Samedi - Dimanche: 10:00-16:00

message

Contactez-nous par WhatsApp

Envoyez-nous un message ou cliquez- ici 

Lundi - Vendredi: 09.00-18.00
Samedi - Dimanche: 10:00-16:00