GRAND TOURING GTO 804EZ

GRAND TOURING GTO 804EZ

Høj ydeevne: en ny serie til bilen, der giver en fantastisk lyd og med enkel installation

Sold from 2012 until now

Predecessor Product: GT5-A604
Made in: China

Getting started with your GRAND TOURING GTO 804EZ

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Specifications

Type
4-Channel
Series
Grand Touring
MSRP U.S.
$359.95 each
Number of Channels/Type
4 Channels
Frequency Response
20Hz-23kHz
Signal-to-Noise Ratio
>85dB
2-Ohm Power Output
100W RMS x 4 channels at 2 ohms, 14.4V DC, less than 1.0% THD
Peak Power
940W
Maximum Current Draw
60A
4-Ohm Power Output
80W RMS x 4 channels at 4 ohms, 14.4V DC, less than 1.0% THD
Depth (mm)
302
Width (in)
9-11/16
Weight (kg)
3.8
Height (in)
2-9/16
Height (mm)
66
Weight (lb)
8.4
Depth (in)
11-15/16
Width (mm)
246

High-performance multichannel power for enhanced sound on the move.

Det er almindelig kendt, at selv den bedste bilforstærker kun er så god, som installationen og opsætningen gør den. Det er derfor, den nye GTO-forstærkerserie er designet til at gøre hele processen mere enkel. Store, tydeligt markerede knapper, farvekodede LED'er og den medfølgende opsætnings-CD gør det nemt at installere den perfekte lyd. Hvis du skal opgradere et fabrikssystem, er signaltilslutning en nem sag med GTO-forstærkere. Du behøver ikke yderligere signalomsættere, adaptere eller stik, da alt dette medfølger i æsken. Den komplette GTO-forstærkerserie omfatter forskellige forstærkerkassestørrelser, udgangseffektfunktioner og konfigurationer, der med garanti passer til enhver bil, ethvert system og næsten ethvert budget, og det hele bakkes op af JBL®'s renommé indenfor topkvalitet.

The GTO-804EZ four-channel model features 4x80 watts RMS (940 watts max). It has selectable high-pass/low-pass active crossovers and bridgeable channel pairs for total flexibility. Use this amplifier to upgrade from four channels of built-in head-unit power in an aftermarket system, as a building block in a growing system design or, by bridging both channel pairs, as a more powerful amplifier for premium component speakers.
The GTO-804EZ amplifier includes an input-level switch, a setup CD with test signals and LED indicators to tell you when the setting is correct. Simply set the switch, turn the input-level knob and watch for the green light that indicates that the setup is perfect. That’s all there is to it. There’s a reason why the amplifier’s model number contains EZ. This feature significantly reduces installation time and delivers excellent results.
JBL engineers have configured the JBL GTO-804EZ amplifier to turn on with a wired input (as in aftermarket systems) or with an auto-sensing circuit that activates whenever the amp detects an audio signal. The auto-sensing feature is helpful when you’re upgrading OEM audio systems that don’t include a remote trigger wire. It’s easily defeated by a switch when you’re using a wired remote turn-on input.
The GTO-804EZ amplifier accepts a wide range of inputs up to 15 volts with line-level or speaker-level signals. Using RCA-to-bare-wire adapters included with the amplifier, you can connect to virtually any OEM or aftermarket audio system. The end result is an amplifier that works with the widest range of cars on the road.
Active 12-decibel/octave low-pass crossovers offer variable filter points between 40Hz and 280Hz. You can select high-pass (HP) filtering, low-pass (LP) filtering or OFF. Importantly, all filter points on the adjustment dial match the silkscreened frequency points on the amplifier chassis – a feature that not all amps provide.
The GTO-804EZ provides a range of bass boost from 0 decibels to +12 decibels, centered at 45Hz. This is a useful feature for restoring some bass that may be limited by the low-frequency response of certain speakers in the system – or to enhance a particular range of bass that the speakers already produce well.
Pairs of the GTO-804EZ system amplifier’s main channels can be bridged into a single, more powerful channel. This setup is useful for flexible audio system designs in a growing system or for full-range speakers in a system that needs more power.
Amplifier protection is just like insurance; you hope you’ll never need it, but it’s sure nice to have when you do. Thermal protection keeps the GTO-804EZ system amplifier from overworking itself to the point of premature failure. Low-impedance protection keeps the amplifier safe from any speaker or wiring failures that result in short circuits.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00