Support Overview / Car & Marine / Car Electronics / Amplifiers / Amplifiers (mono/sub) / GTO-501EZ
GTO-501EZ

GTO-501EZ

770-watt subwoofer amplifier

Sold from 2012 until now

Predecessor Product: GT5-A3011
Made in: China

Getting started with your GTO-501EZ

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Specifications

Series
Grand Touring
Type
Mono/Subwoofer
4-Ohm Power Output
350W RMS x 1 channel at 4 ohms, 14.14V DC, less than 1.0% THD
Peak Power
770W
Frequency Response
10Hz-280Hz
Maximum Current Draw
45A
Signal-to-Noise Ratio
>80dB
2-Ohm Power Output
500W RMS x 1 channel at 2 ohms, 14.4V DC, less than 1.0% THD
Number of Channels/Type
1 Channel
Weight (lb)
6.4
Width (mm)
246
Height (mm)
66
Height (in)
2-9/16
Weight (kg)
2.9
Depth (in)
8-3/8
Depth (mm)
213
Width (in)
9-11/16

High-performance subwoofer power for enhanced sound on the move.

Finally, high-performance amplifiers that are easy to install and calibrate. The JBL® GTO-501EZ subwoofer car audio amplifier provides unmatched ease of installation, configuration and calibration – processes that are necessary to produce clean, powerful sound. Whether you’re upgrading an OEM (original-equipment manufacturer) audio system or installing an aftermarket system, this amplifier offers virtually limitless applications with wired or auto-sensing turn-on – but without making you fuss with adding third-party adapters or converters. These amps drive up to 15 volts of audio signal right to the inputs with either line-level or speaker-level signals. And they come with RCA-to-bare-wire adapters and a setup CD. Experience the clean and powerful output of GTO Series amplifiers in a variety of channel configurations and power ratings, all of which are CEA®-2006A compliant and backed by the JBL reputation for top quality.

The GTO-501EZ Class D mono subwoofer amplifier is rated to deliver 500 watts RMS at 2 ohms (770 watts max). High-efficiency Class D amplifier design ensures the most boom for the buck, all in a modestly sized chassis. It’s an impressive amount of power in an attractive, easily configured amplifier. The wide input range and low current draw make the amplifier ideal for adding a subwoofer to existing OEM or aftermarket systems.
The GTO-501EZ subwoofer amplifier includes an input-level switch, a setup CD with test signals and LED indicators to tell you when the setting is correct. Simply set the switch, turn the input-level knob and watch for the green light that indicates that the setup is perfect. That’s all there is to it. There’s a reason why the amplifier’s model number contains EZ. This feature significantly reduces installation time and delivers excellent results.
JBL engineers have configured the GTO-501EZ amplifier to turn on with a wired input (as in aftermarket systems) or with an auto-sensing circuit that activates whenever the amp detects an audio signal. The auto-sensing feature is helpful when you’re upgrading OEM audio systems that don’t include a remote trigger wire. It’s easily defeated by a switch when you’re using a wired remote turn-on input.
The GTO-501EZ amplifier accepts a wide range of inputs up to 15 volts with line-level or speaker-level signals. Using RCA-to-bare-wire adapters included with the amplifier, you can connect to virtually any OEM or aftermarket audio system. The end result is an amplifier that works with the widest range of cars on the road.
An active 12-decibel/octave low-pass crossover offers variable filter points between 40Hz and 280Hz. Importantly, all filter points on the adjustment dial match the silkscreened frequency points on the amplifier chassis – a feature that not all amps provide.
The GTO-501EZ provides a range of bass boost from 0 decibels to +12 decibels, centered at 45Hz. This is a useful feature for restoring some bass that may be limited by the low-frequency response of certain speakers in the system – or to enhance a particular range of bass that the speakers already produce well.
The high-efficiency, low-current and low-heat performance of Class D amplification ensures high power output from the GTO-501EZ subwoofer amplifier. It also minimizes any need for upgrades to your vehicle’s electrical system.
Amplifier protection is just like insurance; you hope you’ll never need it, but it’s sure nice to have it when you do. Thermal protection keeps the GTO-501EZ amplifier from overworking itself to the point of premature failure. Low-impedance protection keeps the amplifier safe from any speaker or wiring failures that result in short circuits.
The GTO-501EZ amplifier is compatible with the optional wired-remote bass control, which provides easy adjustment of subwoofer-channel bass levels from the front seat. The wired remote is easy to connect with a telephone-style jack and can be mounted in a variety of positions to suit the vehicle and location preferences.

Images & Videos

  • GRAND TOURING GTO 501EZ - Black - 1-Channel Power Amplifier (500 watts) - Hero
  • GRAND TOURING GTO 501EZ - Black - 1-Channel Power Amplifier (500 watts) - Hero
  • GRAND TOURING GTO 501EZ - Black - 1-Channel Power Amplifier (500 watts) - Back
  • GRAND TOURING GTO 501EZ - Black - 1-Channel Power Amplifier (500 watts) - Left
  • GRAND TOURING GTO 501EZ - Black - 1-Channel Power Amplifier (500 watts) - Right
  • GRAND TOURING GTO 501EZ - Black - 1-Channel Power Amplifier (500 watts) - Detailshot 1
  • GRAND TOURING GTO 501EZ - Black - 1-Channel Power Amplifier (500 watts) - Detailshot 2

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00