JBL Tune 720BT

JBL Tune 720BT

Trådløse omsluttende hovedtelefoner

Sold from 2023 until now

Getting started with your JBL Tune 720BT

Getting started with your JBL Tune 720BT

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Specifications

Enheds-størrelser (mm)
40
Number of Microphones
1
Enheds-følsomhed ved 1kHz/1mW (dB)
101
Dynamisk frekvensområde (Hz)
20 Hz – 20 kHz
Impedans (ohm)
32
Audio Cable Length (ft)
0.7
Audio Cable Length (m)
0.2
Dybde (cm)
2.0
Ear Cup Depth (in)
0.8
Højde (cm)
7
Ear Cup External Height (in)
3.6
Bredde (cm)
7.6
Ear Cup External Width (in)
3.0
Indre bredde (cm)
5.4
Ear Cup Internal Height (in)
2.1
Indre højde (cm)
3.7
Ear Cup Internal Width (in)
1.5
Vægt (g)
220
Vægt (oz)
7.8
Bluetooth-profiler
HFP v1.7.2, AVRCP v1.6.2, A2DP v1.3.2
Bluetooth-frekvens
2.4 GHz – 2.4835 GHz
Bluetooth sender-modulation
GFSK, π/4-DQPSK, 8-DPSK
Bluetooth sender-effekt
≤ 10 dBm (E.I.R.P)
Bluetooth-version
5.3
Ladetid (timer fra helt afladet)
2
Maksimal spilletid (timer)
76
JBL One App
Ja
Bluetooth
Ja
Charging cable
Ja
Sammenklappelig
Ja
Indbygget mikrofon
Ja
Aftageligt kabel
Ja
Håndfri opkald
Ja
JBL Pure Bass-lyd
Ja
Flerpunktsforbindelse
Ja
Lynopladning (5 min. = 1 t spilletid)
Ja
Voice Aware
Ja
Water Resistant
Ja

Fordyb dig i JBL Pure Bass-lyd, uanset hvor du er.

Med JBL Tune 720BT-hovedtelefonerne kan du trådløst afspille kraftfuld JBL Pure Bass-lyd takket være den nyeste Bluetooth 5.3-teknologi. Disse hovedtelefoner er nemme at bruge og giver dig op til 76 timers ren nydelse og 3 ekstra timers batteritid efter kun 5 minutters opladning. Hent den gratis JBL Headphones-app, og tilpas din lyd via EQ, mens stemmemeddelelser guider dig gennem hovedtelefonernes funktioner. Håndter opkald, lyd og lydstyrke fra ørekoppen takket være den praktiske knapstyring. Hvis du får et opkald, mens du ser en video på en anden enhed, skifter JBL Tune 720BT problemfrit til din mobil, så du aldrig går glip af et opkald. JBL Tune 720BT-hovedtelefonerne er lette og komfortable, selv efter mange timers lytning. De kan foldes fladt sammen i din rygsæk, så de følger dig overalt.

JBL Tune 720BT har den berømte JBL Pure Bass-lyd, som leverer lyd til flere af verdens mest berømte spillesteder.
Afspil lyd i høj kvalitet trådløst fra din smartphone uden besværlige ledninger ved hjælp af den nyeste Bluetooth-teknologi.
Hent den gratis JBL Headphones-app for at skræddersy lyden til din smag med EQ. Stemmemeddelelser på dit sprog guider dig gennem Tune 720BT-funktionerne.
​Til langvarig lytning: Få op til 76 timers trådløs afspilning, og genoplad batteriet på kun 2 timer med det praktiske USB-C-kabel. 5 minutters lynopladning giver 3 timers ekstra musik.
Du kan nemt styre lyden og håndtere dine opkald fra hovedtelefonerne med de praktiske knapper på ørekoppen. Hør din stemme, mens du taler, med hjælp af Voice Aware.
Gør det nemt at skifte fra én Bluetooth®-enhed til en anden. Du kan nemt skifte fra en video på din tablet til et opkald på din mobiltelefon, så du aldrig går glip af en samtale.
De lette materialer og bløde ørepuder med polstret hovedbøjle er behagelige at have på i længere perioder. Det foldbare design letter transporten, så du kan have din musik med dig når som helst og hvor som helst.
Fladt batteri? Forlæng underholdningen i det uendelige med det medfølgende lydkabel.
Download den gratis JBL Headphones-app for at tilpasse lyden din smag ved at vælge en af de forudindstillede EQ-tilstande eller justere EQ-kurven efter dit indhold, stil og smag. Stemmemeddelelser på dit sprog guider dig gennem funktionerne i Tune 720BT.

FAQs & How-Tos

7 results
  • Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
  • Press volume + and volume - simultaneously for 5 seconds to reset.
    The headphone must be ON while doing this.
  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #5.png
    Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
    Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #1.png
    Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
      Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • This product features Multi-Point Connection which allows you to be connect to two devices at the same time. Effortlessly switch from listening to music on your portable device to a call from your phone.

    To connect to two devices at the same time:

    1. Power on your product.
    2. Make sure that the device you wish to connect to has the BT settings on and within range.
    3. If this is the first time connecting your product, you will notice a flashing LED to indicate that it is searching for a device to connect to. (If this is not your first time, your product will automatically reconnect to the last device it was connected to)
    4. Under your BT settings, go to discoverable devices and the product name should pop up within a few seconds. Depending on the device you are using, you may have to tap on the product to complete the connection. 
    5.Now that you are connected to the first device, push the BT button on the product to connect to the second device. The product should start searching for the second device by displaying a flashing LED.
    6. Go to your BT settings on your second device. The product should pop up on your discoverable devices should pop up within a few moments.

    (Please Note: If the product does not show up on your discoverable devices while it is in pairing mode, quickly turn off your BT settings and turn it back on. This will typically result in resetting the BT search in which your product should pop up on discoverable devices within a few moments)


     
  • This headphone is supported by the My JBL Headphones App.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00