JBL Quantum TWS
Totalt trådløse gaming-øretelefoner med støjreduktion
Sold from 2022 until now
Getting started with your JBL Quantum TWS
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Enheds-størrelser (mm)
- 10
- Aktivt frekvensområde
- 20 Hz – 20 kHz
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 106
- Dynamisk frekvensområde (Hz)
- 20 Hz - 20 kHz
- Impedans (ohm)
- 16
- Vægt (g)
- 42.4
- Charging Case Weight (oz)
- 1.5
- Vægt (g)
- 11
- Earpiece Weight (oz)
- 0.4
- Bluetooth-profiler
- A2DP V1.3, AVRCP V1.6, HFP V1.8
- Bluetooth-frekvens
- 2.4 GHz - 2.4835 GHz
- Bluetooth sender-modulation
- GFSK, π/4 QPSK, 8DPSK
- Bluetooth sender-effekt
- <12 dBm EIRP
- Bluetooth-version
- 5.2
- Charging case battery life (max hours)
- 16
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 8
- Maksimal spilletid med aktiv støjreduktion (timer)
- 5
- Maksimal spilletid (timer)
- 16
- Taletid (timer)
- 4
- Bluetooth
- Ja
- Charging cable
- Ja
- Aktiv støjreduktion
- Ja
- Adaptiv støjreduktion
- Ja
- Lader lyd fra omgivelserne passere
- Ja
- Indbygget mikrofon
- Ja
- Smart opladningsetui
- Ja
- Håndfri opkald
- Ja
- Genopladeligt batteri
- Ja
- Ægte trådløse
- Ja
- Trådløse
- Ja
- IPX-rating
- IPX4
- Ægte adaptiv støjreduktion
- Ja
Lyd er overlevelse
Spil hvor som helst, og hør det hele med JBL Quantum TWS. Ægte adaptiv støjreduktion begrænser distraktioner, mens du fordyber dig i præcis surround-lyd. Får du brug for at vende tilbage til den virkelige verden, kan du med JBL Dual Source hurtigt og nemt skifte fra spil-lyd til indgående opkald, mens Ambient Aware holder dig opmærksom på dine omgivelser. Kompatibel med alle Bluetooth-kilder, så overgangen mellem enheder klares problemfrit, uanset hvor dine eventyr fører dig hen. Du kan nemt og hurtigt parre med Bluetooth-smartphones - og oprette hurtige 2,4 GHz-forbindelser til kompatible enheder med den medfølgende USB-C-dongle i et opladningsetui, der føjer 16 timers strøm til de 8 i dine øretelefoner.
Oplev at træde ind i spillet med JBL QuantumSURROUND*, som omringer dig med præcis og medrivende lyd.
*JBL QuantumSURROUND er kun tilgængelig på pc i kombination med JBL QuantumENGINE-software. Tjek tilslutningsvejledningen for kompatibilitet.
Opret hurtig 2,4 GHz-forbindelse til kompatible enheder med den medfølgende USB-C dongle, der opbevares perfekt i opladningsetuiet. JBL Quantum TWS-øretelefonerne er kompatible med alle enheder, der understøtter Bluetooth, f.eks. smartphones og tablets.
Gå aldrig glip af et opkald, mens du forsvarer galaksen. Når du har oprettet en tabsfri og trådløs 2,4 GHz-forbindelse til en kompatibel enhed, kan du nemt besvare et opkald via Bluetooth og bagefter vende tilbage til din tabsfri og trådløse 2,4 Ghz-forbindelse takket være JBL Dual Source.
Hold fokus på spillet med automatisk kalibrering af JBLs ægte adaptive støjreduktion. Eller følg med i den virkelige verden med Ambient Aware.
Uanset om du afgiver kommandoer eller kalder vennerne til spil, vil din stemme altid gå højt og klart igennem. Samtalekvaliteten sikres af 6 mikrofoner med indbygget stråleformende teknologi.
Få gang i dit spil, når du har chancen, dag eller nat, regn eller solskin, med 8 timers batterilevetid og 16 i etuiet, samt et holdbart, let, vandtæt IPX4-design for komfort og sikkerhed på farten.
Brug for hjælp fra en assistent? Tryk for at tale, når du er forbundet med din mobilenhed, og få hjælp fra Hey Google og Alexa med Multi AI-support.
.
Få fuld kontrol over din totalt trådløse stereolyd overalt. JBL Quantum TWS understøtter den særlige JBL Quantum PC-software og JBL Headphones-appen, så du kan justere dine EQ-, mikrofon- og surround-indstillinger til det perfekte spilmiljø.
FAQs & How-Tos
14 results
-
Yes, the JBL Quantum TWS and JBL Quantum TWS air earbuds are compatible with the JBL Headphones app. It'll allow you to control EQ, ANC (only JBL Quantum TWS) and Smart Ambient feature, Smart Audio & Gaming etc. for better experiences with your headset just like other JBL lifestyle products.Was this helpful? Thank you for your feedback!
-
Place the USB wireless dongle in the USB-C connector of your device and place the earbuds in your ears. The earbuds will automatically connect to your USB wireless dongle. If the earbuds don't pair automatically you can manually pair them again by connecting the JBL Quantum TWS to a mobile device via Bluetooth and open the JBL Headphones app. Turn on the "Dongle Pairing" mode and then press the pairing button on the USB wireless dongle. (Note: USB wireless dongle needs to be connected to an activated device). You will get a message on your JBL Headphones app that the pairing is successful and then press "Understood".Was this helpful? Thank you for your feedback!
-
If you are not using the microphone, make sure that any communication software such as Zoom, Skype, Discord, etc. are closed and that your microphone is muted. You can also take advantage of it's Dual Connect feature and place one of the earbuds in the charging case and speed charge the earbuds to extend the playback time.Was this helpful? Thank you for your feedback!
-
When the earbuds are connected to the USB wireless dongle and Bluetooth connection at the same time, triple tab on the left earbud to switch between the two connections. You'll hear a tone after you triple tab the left earbud signaling the switching is in progress. If you receive an incoming call from your mobile device, you can double tap either earbud and the earbuds will automatically switch over to that connection while answering the call.Was this helpful? Thank you for your feedback!
-
The JBL Quantum TWS works on most mobile devices, however, some mobile devices restrict the utilization of it's audio and microphone functions via USB-C causing there to be no audio or microphone operation. In these cases we recommend connecting to the earbuds using their Bluetooth connection.Was this helpful? Thank you for your feedback!
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
To reset a Quantum headset, you need to connect the product to your computer and open the QuantumEngine.
When you have the QuantumEngine open, go to the "System Software" tap and press "Restore Factory Settings".
Only products that are compatible with the QuantumEngine can be reset this way.
Was this helpful? Thank you for your feedback! -
JBL Quantum Headphones Upgrade tool redefines your headphones experience. Through your macOS device, you can now conveniently upgrade the headset.
Download from macOS app store: https://apps.apple.com/us/app/jbl-quantumengine/id1645040444
Supported models are:- JBL Quantum 610
- JBL Quantum 810
- JBL Quantum 910
- JBL Quantum 910P
- JBL Quantum 910X
- JBL Quantum TWS
Was this helpful? Thank you for your feedback! -
QUANTUM ENGINE
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V1.11.0.1511
Release Date: September 19, 2022
Release Media: Website & Quantum ENGINE
What’s New- Improved firmware stability upgrading process flow for the QUANTUM 910.
------------------------------------------------------------------------
------------------------------------------------------------------------
QUANTUM ENGINE
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V1.11.0.1510
Release Date: August 24, 2022
Release Media: Website & Quantum ENGINE
What’s New- Added support for the new QUANTUM 910 Wireless Headphones
- Over 30 improvements addressing user interface, usability, and stability of the app for a better user experience.
Was this helpful? Thank you for your feedback! -
It is not possible to have Ambient Aware or TalkThru activated at the same time as Sidetone when the microphone is turned on during a call. This is the case no matter if you are using Bluetooth or the 2.4 GHz mode.
You can use Ambient Aware during a call if Sidetone is turned off. You are able to do this in both Bluetooth or the 2.4 GHz mode.
All three audio modes are activated if the microphone on your device is turned off no matter if you are using Bluetooth or the 2.4 GHz mode.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
