JBL Quantum 600
Trådløst og højtydende over-ear-gaming-headset til PC med surroundlyd og spil/chat-indstillingshjul
Sold from 2020 until now
Getting started with your JBL Quantum 600
Documents & Downloads
Specifications
- Enheds-størrelser (mm)
- 50
- Aktivt frekvensområde
- 20 Hz – 20 kHz
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 100
- Dynamisk frekvensområde (Hz)
- 20 Hz - 20 kHz
- Impedans (ohm)
- 32
- Passiv frekvensområde
- 20 Hz – 20 kHz
- Audio Cable Length (ft)
- 3.9
- Audio Cable Length (m)
- 1.2
- Dybde (cm)
- 2.7
- Ear Cup Depth (in)
- 1.1
- Højde (cm)
- 9.7
- Ear Cup External Height (in)
- 3.8
- Bredde (cm)
- 8.7
- Ear Cup External Width (in)
- 3.4
- Indre bredde (cm)
- 6
- Ear Cup Internal Height (in)
- 2.4
- Indre højde (cm)
- 4.6
- Ear Cup Internal Width (in)
- 1.8
- Hovedtelefonernes kabel-længde (m)
- 1.5
- Headphone Cable Length (ft)
- 4.9
- Vægt (g)
- 346
- Vægt (oz)
- 12.2
- 2,4 G trådløs transmittereffekt
- <4 dBm
- 2,4 G trådløs modulation
- π/4 DQPSK
- 2,4 G trådløs bærefrekvens
- 2403.35 MHz - 2479.35 MHz
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid (timer)
- 14
- Audio cable
- Ja
- Indbygget mikrofon
- Ja
- Bekvem og velsiddende stof-hovedbøjle
- Ja
- Genopladeligt batteri
- Ja
- Trådløse
- Ja
- Udskiftelige ørepuder
- Ja
Sound is Survival
JBL Quantum 600 2,4 GHz trådløst gaming-headset, er designet til fordybelse og performance og giver dig en klar fordel over konkurrenterne med nøjagtig og fordybende lyd. JBL QuantumSURROUND™-sound skaber et bredere, mere realistisk rumligt miljø, så du aldrig går glip af nogen detaljer. Boom-mikrofonen med stemmefokus muliggør klar kommunikation med andre spillere, mens et DISCORD-certificeret spil/lydchat-indstillingshjul giver dig mulighed for let at balancere tale- og spillydniveauer. Læderørepuder med memory-skum holder dig komfortabel, mens en 14-timers batterilevetid muliggør ledningsfrie, langvarige gaming-sessioner. Dominer dine modstandere, og få en klar lydfordel med JBL Quantum 600-headsettet.
FAQs & How-Tos
-
Yes, it's 14 hrs with RGB off. You can also find the details on the box. Was this helpful? Thank you for your feedback! -
Yes. You can configure the volume of the mic monitoring in JBL QuantumENGINE. And the default setting of the mic monitoring is set of “OFF”. Was this helpful? Thank you for your feedback! -
Make sure your headset is configured correctly in your Windows settings. The setting should normally be JBL Quantum *Game* to experience QuantumSURROUND.
Please check out this video to assist you further!
https://www.youtube.com/watch?v=LA80RmBrbYgWas this helpful? Thank you for your feedback! -
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
JBL Quantum 400 and ONE are compatible with USB C to A cable to enjoy PS4 console with RGB Lighting on, and Quantum 600 and 800 with wireless-enabled by USB dongle also gives lighting moment on PS4 console games.
*NOTE that RGB will not light up when connecting with 3.5mm cable to any device (PC, Console, Mobile, etc.) because the cable doesn't have power enough for the RBG lighting.Was this helpful? Thank you for your feedback! -
You might have to add a USB extension dock to get the JBL Quantum 350/600/800/810 dongle as close to the headset, or place the common sources of interference (e.g. routers, Wi-Fi speakers etc.) as far from the JBL Quantum 350/600/800/810 dongle.
Was this helpful? Thank you for your feedback! -
The battery is charged using an included USB-A to USB-C USB fabric cable. It will be fully charged for 2 hrs. Note, this cable is only for charging the battery, it will not deliver audio.Was this helpful? Thank you for your feedback!
-
Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
How to check your PC settings for the correct recording device
1. Go to Control Panel
2. Select Hardware and Sound
3. Click on Sound
3 Select Recording
4. Make sure to select the proper recording device.-
Right-click on it Quantum headset.
-
Now select "Set Default Device" or Select "Default Communication Device"
5. Check the microphone levels by right-click on your Quantum headset. Then click on Properties
6. Choose Levels.
7. Adjust accordingly.
Please also make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume.
Check that your headset's Game-Chat balance dial and ensure that the balance is correct, you might refer to the screenshot below from the QuantumEngine PC software.
If you still cannot hear the game or music audio, or if the volume is still very low, check if the TalkThrough is activated via the QuantumEngine software.
Finally, you can also do a short press on the Smart Ambient button on the headset (if your headset, has this feature)Was this helpful? Thank you for your feedback! -
-
Yes, you can adjust the game and chat audio balance by rotating the dial-up and down. When you rotate the dial, you'll feel a notch that indicates the balance is 50% game and 50% chat. The slider on Quantum ONE is different and has no notch but instead a visual indicator.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00