JBL Reflect Contour 2
Trådløse sportshovedtelefoner med sikker pasform
Sold from 2018 until now
Getting started with your JBL Reflect Contour 2
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Enheds-størrelser (mm)
- 5.8
- Dynamisk frekvensområde (Hz)
- 2.402-2.480GHz
- Impedans (ohm)
- 14.0
- Antal dynamiske enheder pr. øre
- 1.0
- Hovedtelefonernes kabel-længde (cm)
- 50.0
- Hovedtelefonernes kabel-længde (ft)
- 1.64
- Bluetooth-frekvens
- 2.402 – 2.480GHz
- Bluetooth sender-modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth sender-effekt
- <4 dbm
- Bluetooth-version
- 4.2
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid (timer)
- 10
- 3-knaps-fjernbetjening med mikrofon
- Ja
- Stofpose
- Ja
- Håndfri opkald
- Ja
- Øretelefoner
- Ja
- Den berømte JBL-lyd
- Ja
- Genopladeligt batteri
- Ja
- Reflekskabler
- Ja
- Comfort Stay Secure Fit
- Ja
- Understøtter Siri, Google Now
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Ja
- Svedsikre
- Ja
- Trådløse
- Ja
- IPX-rating
- IPX5
Designet til bevægelse. Udformet af dig
Kast dig ud i træningen med trådløse hovedtelefoner, der klarer enhver udfordring og matcher din personlige stil. JBL Reflect Contour 2 er designet med en svedtæt letvægtskonstruktion af aluminium og en ørekrog, der er let at sætte på, så du kommer hurtigt af sted. Tilpas din komfort med tre størrelser Freebit™-adaptere, og få nem kontrol over musik og opkald med en 3-knaps-fjernbetjening og mikrofon. Det reflekterende kabel gør dig ekstra synlig, når du træner i mørke. Og med 10 timers batteritid og den berømte JBL-lyd kan du holde dig i gang uden at gå glip af et eneste beat. Med et tryk på en knap kan du let styre dine opkald og få adgang til stemmeassistenten.
FAQs & How-Tos
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
Yes, this headphone features a three button microphone that features volume control, track control, and can receive phone calls.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
The red charge light turns off when charging has finished.Was this helpful? Thank you for your feedback!
-
When the headphones are charging, you will see a solid red light at the top of the inline microphone. When the headphones are fully charged, the red light will shut off. You should expect 8 hours of playback time. Please keep in mind that the level of volume can effect the longevity of the battery life.Was this helpful? Thank you for your feedback!
-
With the headphones switched ON, press and hold both volume buttons for more than 5 seconds.
Your headphones are now reset to factory status.
Was this helpful? Thank you for your feedback! -
Make sure that the device you want to connect to is on and in pairing mode. Press and hold the center button on the inline microphone for 3-5 seconds. (We recommend putting one ear tip inside your ear to hear the audio prompt) You should here "powering on.....pairing" as it searches for your device. The Reflect Contour headphone should appear on your discoverable devices and should connect within 2-3 seconds. If you wish to pair to a different device, make sure the last device it was connected to has the bluetooth turned off. Make sure the headphones are off and press and hold the center button between 3-5 seconds or until the audio prompt states that it is "looking for device" You should be able to pair with a different device within 2-3 seconds.Was this helpful? Thank you for your feedback!
-
The Reflect Contour BT lets you skip the tracks forward, by pressing and holding the volume up button for 3 seconds and skip tracks backward, by pressing and holding the volume down button for 3 seconds.Was this helpful? Thank you for your feedback!
-
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
No. There is no way to turn off the blue LED light from our wireless headphones unless they are turned off.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
