JBL Club Pro+ TWS
Designet til performance
Sold from 2020 until now
Getting started with your JBL Club Pro+ TWS
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Enheds-størrelser (mm)
- 6.8
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 102
- Dynamisk frekvensområde (Hz)
- 10 Hz – 20 kHz
- Impedans (ohm)
- 16
- Antal dynamiske enheder pr. øre
- 1
- Vægt (g)
- 55.4
- Charging Case Weight (oz)
- 2
- Vægt (g)
- 13.7
- Earpiece Weight (oz)
- 0.5
- Bluetooth-profiler
- A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth-frekvens
- 2.4 GHz – 2.4835 GHz
- Bluetooth sender-modulation
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth sender-effekt
- 0 - 9.5dbm
- Bluetooth-version
- 5.1
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 8
- Maksimal spilletid med aktiv støjreduktion (timer)
- 6
- Maksimal spilletid (timer)
- 8
- Bluetooth
- Ja
- Stemmeassistent
- Ja
- 3-knaps-fjernbetjening med mikrofon
- Ja
- Adaptiv støjreduktion
- Ja
- Indbygget mikrofon
- Ja
- Smart opladningsetui
- Ja
- Håndfri opkald
- Ja
- Genopladeligt batteri
- Ja
- Ægte trådløse
- Ja
- Trådløse
- Ja
- IPX-rating
- IPX4
Alle de lyde, du vil høre. Ingen af dem, du ikke vil høre
Du er altid tændt. Så hvorfor ikke også dine hovedtelefoner? Fra toget til skrivebordet og videre til træningscenteret – musikken holder dig i gang hele dagen. JBL CLUB PRO+ TWS øretelefonerne giver dig det ultimative inden for totalt trådløs performance. Tilslutningen klares uden problemer, uanset hvilket ørestykke du tager ud af etuiet først. Du styrer selv, hvor meget lyd du hører fra omgivelserne - alt efter hvor du er, og hvad du laver. Når du besvarer et opkald, vil de tre mikrofoner lade dig føre samtalen uden distraherende støj. Komfort hele dagen, nem trådløs opladning og ikke mindst den legendariske JBL pro-lyd løfter den totalt trådløse oplevelse til nye højder.
Playlisten til din arbejdsdag bliver endnu mere inspirerende takket være den komplette og medrivende JBL pro-lyd. Brug JBL My Headphones-appen til at tilpasse lyden efter dine ønsker, eller vælg forudindstillinger fra STAGE+, der er designet af verdens bedste DJ's.
Sidder du på en café og prøver at dæmpe den højlydte samtale fra bordet ved siden af? Aktiver støjreduktions-teknologien, så du bevarer koncentrationen. Går du ned ad en travl gade? Lad lyden fra omgivelserne trænge igennem - af hensyn til din egen sikkerhed. Brug for en kort samtale med dine kollegaer? Med TalkThru kan du nemt beholde hovedtelefonerne på.
Du kan let parre JBL CLUB PRO+ TWS med din enhed, så snart du åbner etuiet, takket være Dual Connect + Sync-teknologien. Og du behøver ikke spekulere over, hvilket ørestykke du tager først, for du kan udføre alle funktioner med begge ørestykker, uanset om du bruger ét eller dem begge.
Du kan trygt besvare et opkald udendørs på en blæsende dag. Den stråledannende teknologi med seks mikrofoner leverer krystalklare opkald, som fremhæver de lyde, du ønsker at høre, og dæmper den baggrundsstøj, du ikke ønsker at høre.
Kom gennem hele din arbejdsdag med en otte timers opladning plus tre gange mere fra etuiet (yderligere 24 timer). Får du brug for lidt ekstra strøm, giver ti minutter i opladningsetuiet en hel times ekstra brug. Det stilfulde, ergonomiske opladningsetui understøtter både totalt trådløs Qi-opladning og type-C-stik.
Tryk på det ikoniske JBL-logo for at tale til Google eller aktivere Amazon Alexa. De tre følsomme mikrofoner sikrer, at din digitale assistent aldrig har problemer med at høre eller forstå dig.
Det helstøbte design, der er inspireret af professionelle in-ear monitors, giver komfort hele dagen. Første gang du bruger dem, vil JBL-appen guide dig gennem et nemt forseglingstjek for at sikre, at du bruger den bedste størrelse af de tre medfølgende ørestykker.
Få endnu mere kontrol og personlig tilpasning af din lytteoplevelse
med denne gratis app.
FAQs & How-Tos
21 results
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback! -
The True Adaptive Noise Cancelling technology is a features which adjusts noise-cancelling levels in real-time, 50,000 times per second to account for environmental ambient noises and personal attributes such as movement, hair and eyeglasses to deliver best-in-class Noise Cancelling and immersive sound in any environment.
With the help of Feed Forward and Feed Backward microphones, the Adaptive Noise Cancelling technology fully monitors exterior sounds picking up low-frequencies and neutralizing them before they reach the ear. The headphones generate a sound that's phase-inverted by 180 degrees to the unwanted noise, resulting in the two sounds cancelling each other out.
In addition, all headphones allow the listener to adapt or adjust the level of ambient noise through features like Ambient Aware and TalkThru.Was this helpful? Thank you for your feedback! -
JBL Club headphones do not support aptX. There are a number of different platforms available and our choice was driven by the one that provides the combination of best sound quality and user experience. The platform that we have selected perfectly fits the requirements of the JBL Club series including voice integration and audio customization whilst supplying the Hi Res-certified headphones with the quality of audio they deserve.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
Visit the App Store and download the ‘Amazon Alexa’ App.
- Click the Plus(+) button on the top right of the screen.
- Then select ‘Add Device‘.
- Select headphones from the list and then choose your Headphones from the list of available devices.
- Follow the rest of the instructions in the Alexa App to complete the setup.
Was this helpful? Thank you for your feedback! -
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
* Location
Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
