JBL EVEREST™ 110
Trådløse øretelefoner
Sold from 2017 until now
Getting started with your JBL EVEREST™ 110
Documents & Downloads
Specifications
- Enheds-størrelser (mm)
- 5.8
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 96dB
- Dynamisk frekvensområde (Hz)
- 10Hz-22kHz
- Impedans (ohm)
- 32.0
- Antal dynamiske enheder pr. øre
- 1.0
- Vægt (oz)
- 0,56
- Bluetooth-profiler
- HFP v1.7, HSP v1.2, A2DP v1.3, AVRCP v1.6
- Bluetooth-frekvens
- 2.402GHz-2.48GHz
- Bluetooth sender-modulation
- GFSK,π/4DQPSK, 8DPSK
- Bluetooth sender-effekt
- 0-4 dbm
- Bluetooth-version
- 4.1
- Ladetid (timer fra helt afladet)
- 2.0
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 8.0
- Maksimal spilletid (timer)
- 8.0
- Taletid (timer)
- 8.0
- 3-knaps-fjernbetjening med mikrofon
- Ja
- Håndfri opkald
- Ja
- Den legendariske JBL Pro Audio Sound
- Ja
- Genopladeligt batteri
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Nej
- Trådløse
- Ja
Trådløs oplevelse. Enestående komfort.
De trådløse JBL Everest 110 øretelefoner giver dig den legendariske JBL Pro Audio-lyd. Du kan nyde den dynamiske lytteoplevelse i op til 8 timer, og herefter klares opladningen på bare to timer. Det ergonomiske design er tilpasset alle ørets konturer og sidder perfekt, så du får enestående komfort og mange timers lytteglæde. Oplev krystalklare, håndfri opkald med den indbyggede mikrofon med ekkoreducering. Fås med ørekapper i tre størrelser og et førsteklasses metaldesign. Flotte at se på - og endnu bedre at lytte til. Lyt lige her.
FAQs & How-Tos
-
No. The Everest 110 are not sweat proof and do not have an IPX rating that protects the headphones from sweat and water. Over exposure to sweat and water can cause significant damage to the headphones.Was this helpful? Thank you for your feedback!
-
Yes, the Everest 110 features volume control that is compatible with most smart devices. The volume control is located on the inline microphone.Was this helpful? Thank you for your feedback!
-
Switch the headphone ON, then press both volume buttons (VOL + and VOL-) at the same time, and hold them for 5-6 seconds. The headphones are now reset to factory default.Was this helpful? Thank you for your feedback!
-
Press and hold the center button located on the inline microphone. It helps to have one or both ear inserts in the ear to hear the audio voice prompts. Once you press and hold the power button, you will hear the audio voice stating, "powering on". If this is your first time pairing the device, it will automatically go into pairing mode and will be looking for the device. Make sure the device you are trying to connect to is in search mode. It should recognize the Everest 110 within 2-3 seconds. If you would like to connect to a different device. Make sure the unit is off and proceed to press and hold the center button on the inline mic from 4-6 seconds until you hear "powering on......JBL Everest is ready to pair. Go to the pairing menu on your device" You will now be able to pair to a different device. The device should recognize the Everest 110 within 2-3 seconds and will connect.Was this helpful? Thank you for your feedback!
-
To charge the Everest 110, slide the rubber window from the top down to expose the USB charging port that is located on the back of the inline microphone. Please use the JBL charging cable that was included in the packaging to charge these headphones.Was this helpful? Thank you for your feedback!
-
The Everest 110 should receive 8 hours of audio playback on a full charge. However, depending on the volume level at which you listen to your music at, this can decrease the battery life faster.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with Us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00