JBL EVEREST™ ELITE 150NC
Trådløse øretelefoner med støjreduktion
Sold from 2018 until now
Getting started with your JBL EVEREST™ ELITE 150NC
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Enheds-størrelser (mm)
- 12.0
- Enheds-følsomhed ved 1kHz/1mW (dB)
- @1kHz dB v/pa: -20
- Dynamisk frekvensområde (Hz)
- 10Hz–22kHz
- Impedans (ohm)
- 16.0
- Antal dynamiske enheder pr. øre
- 1.0
- Vægt (g)
- 53.0
- Vægt (oz)
- 1.87
- Bluetooth-frekvens
- 2.402GHz-2.48GHz
- Bluetooth sender-modulation
- GFSK,π/4-DQPSK, 8DPSK
- Bluetooth sender-effekt
- 4 dbm
- Bluetooth-version
- 4.0
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 16
- Maksimal spilletid med aktiv støjreduktion (timer)
- 14
- Maksimal spilletid (timer)
- 10
- 3-knaps-fjernbetjening med mikrofon
- Ja
- Adaptiv støjreduktion
- Ja
- Lader lyd fra omgivelserne passere
- Ja
- Etui
- Ja
- Håndfri opkald
- Ja
- Øretelefoner med nakkebånd
- Ja
- Den legendariske JBL Pro Audio Sound
- Ja
- Genopladeligt batteri
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Ja
- Multifunktionel TalkThru-knap
- Ja
- Trådløse
- Ja
Den smarteste måde at lytte til musik på.
Dit liv, din musik, din komfort. Den helt nye JBL Everest Elite 150NC er virkelig skabt til dig. Med det smarte design kan du nyde trådløs frihed med op til 16 timers lytteglæde på en enkelt opladning. Når støjreduktionen (ANC) er slået til, har du fuld kontrol med din lytte-oplevelse i op til 14 timer. JBL Everest Elite 150NC har to ekko-reducerende mikrofoner, som giver dig krystalklare telefonsamtaler og håndfri håndtering af opkald og musik. Legendarisk JBL Pro Audio-lyd, magnetiske ørepuder med filterfri kabler, et kompakt og hårdt etui samt letvægtsdesignet gør disse hovedtelefoner til en fantastisk rejsekammerat. Disse slanke og elegante øretelefoner fås i metal-design og farver. De er omhyggeligt fremstillet af førsteklasses materialer, der giver perfekt pasform med ørestykker i flere størrelser. Appen "My JBL Headphones" tilbyder trådløse opdateringer, så hovedtelefonerne er fremtidssikre. Du kan også justere hvor meget lyd, du vil høre fra omgivelserne. Prøv at lytte.
Lyt til al din musik trådløst.
Nyd den samme medrivende oplevelse og fantastiske lyd, som JBL har leveret til koncertsale, studier og dagligstuer gennem 70 år.
Skru ned for verden med adaptiv støjreduktion, som lader dig bestemme, hvor meget af den omgivende støj du vil slippe ind eller holde ude. Det styres fra "My JBL Headphones" app'en eller Smart-knappen på nakkebåndet.
Indbygget batteri med micro USB-opladning giver op til 14 timers spilletid med støjreduktion - eller op til 16 timer med støjreduktion slået fra. Oplad batteriet fuldt ud på 2 timer.
To indbyggede mikrofoner med ekko-reduktion sikrer krystalklare, håndfri opkald.
Få optimalt udbytte af Everest Elite 150NC ved at skræddersy indstillingerne til din personlige smag.
Formede ørepropper giver enestående komfort - og en længere og mere behagelig lytteoplevelse.
Det kompakte og strømlinede design og et førsteklasses hårdt etui giver maksimal bærbarhed og beskyttelse.
Sørger for, at hovedtelefonerne bliver på deres plads omkring halsen uden at blive sammenfiltret, når de ikke er i brug.
FAQs & How-Tos
20 results
-
No. The Everest 150NC do not feature an IPX rating and are not designed to be overexposed to moisture. Overexposure can compromise the controls and sound.Was this helpful? Thank you for your feedback!
-
For headphones with Version 4.0 of the Firmware, the first update will be done via USB cable, and after the first update, all subsequent updates will be delivered over the air. For headsets with version 5.0 of the firmware, all updates will be delivered over the air, via the appWas this helpful? Thank you for your feedback!
-
Sorry, neither AAC nor aptX are supported.Was this helpful? Thank you for your feedback!
-
Switch the headphone ON, then press both volume buttons (VOL + and VOL-) at the same time, and hold them for 5-6 seconds. The headphones are now reset to factory default.Was this helpful? Thank you for your feedback!
-
With the headphone in OFF state, press and hold the ON/OFF button for about 7 seconds for the Everest, 16 seconds for the Everest ELITE models. (ELITE changes to 7 seconds as well from software 0.5.6). Bluetooth memory is now erased, and new pairings can be made. An ELITE headphone permits pairing with one source device at a time. If you do not want to do a complete reset as described above, you can use the following method. Without reset, ELITE will try to re-pair with the last source when switched ON. If the last source is not detected, maybe because you want to use another source device, switch the ELITE off and on again, and make sure that the last source device you used is no longer switched ON. This way the ELITE will not be able to "see" the old source, and it will search for a new one. Now the ELITE will again search for the last paired source, and since it cannot find it after some seconds, it will switch back to be open for pairing with a new source. The LED will blink red/blue as an indication of this. The Everest BT models permit pairing with two source devices simultaneously. If you have used both source pairings, and want to pair to a third source, please perform the reset as described above (hold the ON/OFF button for about 7 seconds with the Everest OFF). Now you can again pair two source devices.Was this helpful? Thank you for your feedback!
-
With the headphones switched ON, press VOLUME + and VOLUME - , and hold them for 5 seconds. Your headphones are now reset to factory settings. This is true for Everest 310, 710, Elite 750, 310GA and 710GA.Was this helpful? Thank you for your feedback!
-
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
Visit the App Store and download the ‘Amazon Alexa’ App.
- Click the Plus(+) button on the top right of the screen.
- Then select ‘Add Device‘.
- Select headphones from the list and then choose your Headphones from the list of available devices.
- Follow the rest of the instructions in the Alexa App to complete the setup.
Was this helpful? Thank you for your feedback! -
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
