JBL Inspire 500

JBL Inspire 500

Trådløse sportsøretelefoner

Getting started with your JBL Inspire 500

Getting started with your JBL Inspire 500

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Specifications

Dynamic Driver size
15.4mm
Frequency response
20-20k Hz
Impedance
32 Ohm
BT Type
4.1
Battery Lifetime (hr)
up to 8
Weight
20g

Gør aldrig ondt. Falder aldrig ud.

Inspire™ 500 sportsøretelefonerne fra JBL, som er skabt af atleter, beriger din aktive livsstil med fantastisk lyd, så du frit kan fokusere på din træning. Hvad enten du løber langdistanceløb eller deltager i CrossFit®-konkurrencer, vil du få glæde af den sikre TwistLock™-teknologi med ergonomiske ørespidser, som garanteret aldrig gør ondt eller falder ud. Øretelefonerne er designet til at motivere dig, og med op til 8 timers JBL Signature Sound kan du fortsætte din træning længere og hårdere. Desuden medfølger en aftagelig kabelklemme for ekstra sikkerhed, og den solide konstruktion modstår både regn, vand og sved. Disse sportsøretelefoner giver dig en førsteklasses lydoplevelse, som passer perfekt til dine ører, plus bekvemmeligheden ved trådløse forbindelser via Bluetooth®.

Vores patenterede TwistLock™-teknologi giver et sikkert greb, som sikrer, at disse øretelefoner aldrig falder ud, selv under de hårdeste fysiske aktiviteter.
Disse øretelefoner, som garanteret aldrig vil gøre ondt, er fremstillet med ultra-blød og fleksibel silikone for vedvarende ergonomisk komfort.
Inspire™ 500 er udviklet til træning under alle forhold og modstår stærk regn, vand og sved.
Det sved- og vandafvisende 3-knaps mikrofonsystem giver et nyt niveau af bekvemmelighed for dig, som elsker at multitaske. Med et tryk på en knap kan du styre telefonopkald og musikspor - uden at afbryde din træning. Kompatibel med de fleste smartphones.
Batteriet er konstrueret og testet til at levere strøm til en hel uges træninger. Du kan kontrollere batteritiden med lysdioder på skærmen samt lydsignaler.
I over 60 år har JBL konstrueret den præcise og naturligt artikulerede lyd, som kan høres i verdens bedste biografer, scener og lydstudier.

FAQs & How-Tos

10 results
  • Yes, these headphones can be connected and paired to two devices at the same time.
  • Yes, the Inspire 500 features a microphone located on the cord. We recommend running the cord under your chin for the best call connection.
  • Yes. The Inspire 500/700 series features a three button microphone that enables you to control the volume.
  • Yes, the Inspire 500 features a 3 button mic that features, pause/play, track and volume control.
  • By habit, we try to shove earbuds into our ear canals in attempts to get them to stay in. The 500 Series headphone is a completely different concept. The tip of the enhancer (ear tip) should funnel gently down into the ear canal and the base of the enhancer should fill the entire concha (bowl) of your ear. If there is still quite a bit of space between the back of the enhancer, and the back of the bowl of the ear, there is nothing to support it and it will eventually fall out. Typically larger sizes will fill the extra space inside the concha. We recommend trying both sizes featured in the packaging. If you are still experiencing fit issues, please reach out to your local JBL Customer Support for information regarding different sizing options.
  • To power on the device, place one of the headphones inside your ear and press and hold the center button on the inline mic. You should hear the audible voice stating, “powering on” and a blue blinking light should appear at the top of the inline mic. If this is your first time connecting to a device, it should immediately go into pairing mode. The device should recognize the Inspire 500 Wireless headphone. Once you select that option, the audible voice should state, “connected”. If you are trying to connect to a different device, turn the headphones on and press and hold for 3-5 seconds for the headphones to start searching for a different device. The headphones should appear on your discoverable devices within a few seconds. You should hear the audible voice stating, “Powering on….looking for device” You will see the Bluetooth light alternate between red and blue when it is in pairing mode. Once connected the Bluetooth will change to a flashing LED light and the audible voice will state, “connected”.
  • To power on the device, place one of the headphones inside your ear and press and hold the center button on the inline mic. You should hear the audible voice stating, “powering on” and a blue blinking light should appear at the top of the inline mic. If this is your first time connecting to a device, it should immediately go into pairing mode. The device should recognize the Inspire/Focus 500 Wireless headphone. Once you select that option, the audible voice should state, “connected”. If you are trying to connect to a different device, turn the headphones on and press and hold for 3-5 seconds for the headphones to start searching for a different device. The headphones should appear on your discoverable devices within a few seconds. You should hear the audible voice stating, “powering on….looking for device” You will see the Bluetooth light alternate between red and blue when it is in pairing mode. Once connected the Bluetooth will change to a flashing LED light and the audible voice will state, “connected”.
  • To power on the device, place one of the headphones inside your ear and press and hold the center button on the inline mic. You should hear the audible voice stating, “powering on” and a blue blinking light should appear at the top of the inline mic. If this is your first time connecting to a device, it should immediately go into pairing mode. The device should recognize the Inspire 500 Wireless headphone. Once you select that option, the audible voice should state, “connected”. If you are trying to connect to a different device, turn the headphones on and press and hold for 3-5 seconds for the headphones to start searching for a different device. The headphones should appear on your discoverable devices within a few seconds. You should hear the audible voice stating, “powering on….looking for device” You will see the Bluetooth light alternate between red and blue when it is in pairing mode. Once connected the Bluetooth will change to a flashing LED light and the audible voice will state, “connected”.
  • No. Although the Inspire 500/700 can be exposed to some water and sweat, overexposure can cause significant damage to the headphones and can compromise the controls.
  • Yes. The Inspire 500/700 is an in-ear Sport Wireless Headphone.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00