JBL Live 200BT
Trådløse øretelefoner med nakkebånd
Sold from 2018 until now
Getting started with your JBL Live 200BT
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Enheds-størrelser (mm)
- 8
- Dynamisk frekvensområde (Hz)
- 20Hz – 20kHz
- Maksimal spilletid (timer)
- 10
- Bluetooth
- Ja
- Charging cable
- Ja
- Stemmeassistent
- Ja
- Indbygget mikrofon
- Ja
- Håndfri opkald
- Ja
- Øretelefoner med nakkebånd
- Ja
- Den berømte JBL-lyd
- Ja
- Flerpunktsforbindelse
- Ja
- Genopladeligt batteri
- Ja
- Trådløse
- Ja
Lev for fuld styrke.
Få det bedste ud af hvert øjeblik og hold kontakten til din omverden med JBL LIVE 200BT. Disse nye øretelefoner med trådløs afspilning og fleksibelt nakkebånd giver dig den berømte JBL-lyd. De gør det let og komfortabelt at holde kontakten, når du er på farten. Nyd den fantastiske lyd fra 8mm-enhederne med kraftig basydelse. Du kan trådløst afspille din musik i op til 10 timer - og derefter oplade batteriet fuldt ud på bare 2 timer. JBL LIVE 200BT hovedtelefonerne er lavet af førsteklasses materialer i et bredt udvalg af farver. De holder dig forbundet med omverdenen takket være en 3-knappers fjernbetjening, en mikrofon og mulighed for flerpunktsforbindelse, så du nemt kan skifte mellem flere enheder. Den enkle adgang til stemmeassistenter giver nem integration til hele din verden. En praktisk bonus, der løfter komforten til nye højder, er de magnetiske ørestykker, som er filterfri og leveres med bløde ørespidser i flere størrelser.
FAQs & How-Tos
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
Yes. To take a call from the Live 200BT press the center button located on the RIGHT neckband for 1-2 seconds. To hang up, simply press the center button again.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
No. The Live 200BT does not feature any IPX rating so overexposure to both sweat and water can compromise the headphones.Was this helpful? Thank you for your feedback!
-
This product features Multi-Point Connection which allows you to be connect to two devices at the same time. Effortlessly switch from listening to music on your portable device to a call from your phone.
To connect to two devices at the same time:
1. Power on your product.
2. Make sure that the device you wish to connect to has the BT settings on and within range.
3. If this is the first time connecting your product, you will notice a flashing LED to indicate that it is searching for a device to connect to. (If this is not your first time, your product will automatically reconnect to the last device it was connected to)
4. Under your BT settings, go to discoverable devices and the product name should pop up within a few seconds. Depending on the device you are using, you may have to tap on the product to complete the connection.
5.Now that you are connected to the first device, push the BT button on the product to connect to the second device. The product should start searching for the second device by displaying a flashing LED.
6. Go to your BT settings on your second device. The product should pop up on your discoverable devices should pop up within a few moments.
(Please Note: If the product does not show up on your discoverable devices while it is in pairing mode, quickly turn off your BT settings and turn it back on. This will typically result in resetting the BT search in which your product should pop up on discoverable devices within a few moments)
Was this helpful? Thank you for your feedback! -
This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00