JBL Tune 215TWS

JBL Tune 215TWS

Totalt trådløse øretelefoner

Sold from 2020 until now

Getting started with your JBL Tune 215TWS

Getting started with your JBL Tune 215TWS

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Specifications

Enheds-størrelser (mm)
6
Enheds-følsomhed ved 1kHz/1mW (dB)
101
Dynamisk frekvensområde (Hz)
20 Hz – 20 kHz
Impedans (ohm)
16
Antal dynamiske enheder pr. øre
1
Vægt (g)
51.3
Charging Case Weight (oz)
1.8
Vægt (g)
10.8
Earpiece Weight (oz)
0.4
Bluetooth-profiler
A2DP 1.3, AVRCP 1.6, HFP 1.7
Bluetooth-frekvens
2.4 GHz – 2.4835 GHz
Bluetooth sender-modulation
GFSK, π/4DQPSK, 8DPSK
Bluetooth sender-effekt
0 - 6dbm
Bluetooth-version
5.0
Ladetid (timer fra helt afladet)
2
Maksimal spilletid (timer)
5
Bluetooth
Ja
Stemmeassistent
Ja
Indbygget mikrofon
Ja
Smart opladningsetui
Ja
Håndfri opkald
Ja
JBL Pure Bass-lyd
Ja
Genopladeligt batteri
Ja
Ægte trådløse
Ja
Trådløse
Ja

Hold forbindelsen, drop kablerne.

Bliv ét med din musik og din verden - uden at blive begrænset af ledninger. Din yndlingsmusik lyder bedre med JBL Pure Bass. JBL TUNE 215TWS-hovedtelefonerne er utroligt komfortable og holder dig på toppen i 20 timer. Du kan nemt administrere opkald og stemmeassistent fra et eller begge ørestykker med Dual Connect. Samtidig sparer du batteritid, så du kan lytte længere eller genoplade hurtigt med USB type-C.

JBL har gennem årtier leveret lyden til festivaler og koncerter over hele verden. Nu vækker JBL din egen verden til live med den fantastiske Pure Bass-lyd.
Ledninger filtrer sammen i din taske, sidder fast i din jakke eller dit hår – og er i det hele taget bare til besvær. Oplev frihed uden ledninger med de totalt trådløse JBL TUNE 215TWS øretelefoner.
Med op til 25 timers batteritid (5 timer i øretelefonerne og 20 timer fra etuiet) kan du lytte hele dagen og natten med. Hold gang i din egen private koncert, lige så længe du orker.
Venstre øre, højre øre, begge ører? Med Dual Connect kan du nemt vælge mellem at lytte til musik eller foretage opkald med enten det ene eller begge ørestykker. Og batteriet løber aldrig tør, fordi kan du oplade det ene ørestykke, mens du bruger det andet.
Hvad fungerer bedst for dig? Med 6 forskellige farver kan du finde det perfekte par ørestykker, der nøjagtigt matcher din stil.
Ingen detalje er overladt til tilfældighederne. Opladningsetuiet til JBL TUNE 215TWS er lige så gennemtænkt designet som de ørestykker, det rummer. Etuiets form er inspireret af natursten, og den bløde overflade med buet låg åbnes hurtigt, så du får nem adgang til dine ørestykker.

FAQs & How-Tos

7 results
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • 1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
  • This headphone does not feature volume control. You must manually control volume from your device.
  • This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00