Under Armour Sport Wireless Heart Rate
Trådløse øretelefoner med pulsmåling for atleter
Sold from 2016 until now
Getting started with your Under Armour Sport Wireless Heart Rate
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Bluetooth
- Speaker drivers
- JBL 5.8mm dynamic
- Maximum volume
- 111dB SPL
- Frequency response
- 10Hz - 22kHz
- Bluetooth version and profiles
- 4.2, A2DP v1.3, AVRCP v1.6, HFP v1.6, HSP v1.2
- Bluetooth transmitted frequency and power
- 2.402GHz - 2.48GHz, <4dBm
- Bluetooth transmitted modulation
- GFSK, π/4, DQPSK, 8-DPSK
- Battery type
- rechargeable lithium-ion (3.7V 2x50mAH)
- Battery life
- up to 5 hours with audio and heart rate enabled
- Battery charge time
- Less than 2 hours
- Controls
- three-button controller, right earbud touch sensor
- Connector
- micro USB
- Included
- zippered pouch, charge cable, size 5, 6, 7, and 8 eartips, MapMyRun premium voucher
Find din zone.
Træn hårdere og smartere med Under Armour® Sport Wireless Heart Rate – Udviklet af JBL®. Disse trådløse og svedafvisende øretelefoner opgraderer din træning med motiverende musik og pulsmåling - lige i øret. Med UA Record™ kan du se aktuelle træningsanalyser og analysere dine præstationer over tid. Du kan endda tjekke din aktuelle puls med berøringssensoren på højre øretelefon. UA Sport Wireless Heart Rate er perfekte til jogging, cykling, roning og alle former for cardiotræning. Den berømte JBL-lyd med Pure Bass holder motivationen oppe - og bringer dig helt i mål.
Bekvem og komfortabel teknologi i øret, udviklet af eksperter og testet af atleter.
Hør indtalte opdateringer af pulsen og optimer din udholdenhedstræning for at opnå dine mål – du skal blot berøre den højre øretelefon.
UA Record™ er dit instrumentbræt for internetforbundet fitness, som giver dig aktuelle træningsanalyser og skræddersyet pulsfeedback, så du kan forbedre dine præstationer.
Den varemærkebeskyttede pasform er skabt til atleter, så du får glæde af det mest komfortable og sikre greb. Du skal blot dreje og låse – så nemt er det. Disse øretelefoner vil med garanti aldrig gøre ondt eller falde ud.
Bluetooth-teknologien sikrer nem forbindelse og kabelfri ydeevne uden besvær.
De førsteklasses dynamiske enheder skaber en storslået lyd, og kraften fra JBL Pure Bass hjælper med at holde pulsen oppe.
Disse øretelefoner er konstrueret af førsteklasses materialer og testet af atleter, så de modstår selv den mest intense træning.
IPX5-certificeret med avanceret nano-beklædning, designet til at holde sveden ude.
Start træningen med dit UA-armbånd og tjek pulsen på dit håndled.
Få næsten en hel uges træning med op til 5 timers batteritid pr. opladning.
Kontroller lydstyrken, spring over sange og besvar telefonopkald uden at afbryde din rytme. Den integrerede fjernbetjening virker både med iOS®- og Android™-enheder.
Få et gratis 12 måneders premium medlemskab til MapMyRun oven i købet. Forbind for at indstille brugerdefinerede pulszoner, spore din ydeevne og meget mere.
FAQs & How-Tos
32 results
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
No, you will need to use your fingertips, or use special gloves made for touch-screen use.Was this helpful? Thank you for your feedback!
-
Currently in Record, you can not customize ranges for each heart rate zone but you can customize your Max heart rate, which affects your zone ranges. Edit your Max heart rate by going to My Profile page by tapping the person icon in the top left corner. Tap the edit button in the top left corner to edit the Max HR field.Was this helpful? Thank you for your feedback!
-
No. These headphones are not waterproof. Swimming with these headphones will cause significant and irreversible damage.Was this helpful? Thank you for your feedback!
-
You can turn the Heart Rate sensor off and still use the headphones for audio by placing your finger on the right earpiece for 3-4 seconds. You will hear an audio prompt stating, “Heart Rate disconnected” which will turn the Heart Rate sensor off. If you wish to turn the sensor back on, simply place your finger on the RIGHT earpiece again for 3-4 seconds until you hear the voice prompt stating that the Heart Rate sensor has been turned back on.Was this helpful? Thank you for your feedback!
-
Although the product is Water Resistant and Sweat Resistant, continuous exposure to water over an extended period of time may damage your earphones.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
If you want to pair and connect to a different device, make sure the headphones are turned off. Proceed to turn the headphones on by pressing and holding the power button for 3- 5 seconds until you hear the audible voice stating “power on” followed by “looking for device.” You will see the LED alternate between blue and red as it searches for your new device. Make sure your device is in search mode. Within seconds your headphone should appear as one of your discoverable devices. You will then hear the audible voice stating, “audio connected” followed by a blinking blue LED light located on the inline microphone indicating that it is now connected to a device.Was this helpful? Thank you for your feedback!
-
To increase the volume, quickly press the top button located on the inline microphone with several quick clicks. If you want to decrease the volume, quickly press the bottom button with several quick clicks until desired volume is achieved.Was this helpful? Thank you for your feedback!
-
The UA Sport Wireless Heart Rate must be charged with a micro USB charger that is provided in the packaging. You will find the USB outlet located on the bottom left side of the inline microphone. There will be a small rubberized window that you can slide up and over to expose the outlet. After plugging in the headphones, you will see a solid red light appear at the bottom of the inline microphone. Once the headphones are fully charged, the red light will turn off. It typically takes less than 2 hours of charging time to receive the 5 full hours of audio playback.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
