JBL Tune 600BTNC
Trådløse on-ear hovedtelefoner med aktiv støjreduktion.
Sold from 2018 until now
Getting started with your JBL Tune 600BTNC
Documents & Downloads
Specifications
- Enheds-størrelser (mm)
- 32.0
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 100dB
- Dynamisk frekvensområde (Hz)
- 20 Hz - 20 kHz
- Impedans (ohm)
- 32.0
- Antal dynamiske enheder pr. øre
- 1.0
- Vægt (g)
- 173.0
- Vægt (oz)
- 6.1
- Bluetooth-profiler
- HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.5
- Bluetooth-frekvens
- 2.402GHz-2.48GH
- Bluetooth sender-modulation
- GFSK, /4DQPSK, 8DPSK
- Bluetooth sender-effekt
- 0-4 dbm
- Bluetooth-version
- 4.1
- Ladetid (timer fra helt afladet)
- 2.0
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 22.0
- Maksimal spilletid med aktiv støjreduktion (timer)
- 12.0
- Maksimal spilletid (timer)
- 22.0
- Taletid (timer)
- 22.0
- Bluetooth
- Ja
- Aktiv støjreduktion
- Ja
- Indbygget mikrofon
- Ja
- Aftageligt kabel
- Ja
- Kan foldes fladt, så de er nemme at opbevare
- Ja
- Håndfri opkald
- Ja
- JBL Pure Bass-lyd
- Ja
- On-ear
- Ja
- Genopladeligt batteri
- Ja
- Fjernbetjening på ørekopper?
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Nej
- Trådløse
- Ja
Din musik, uden støj
Vi præsenterer JBL TUNE600BTNC trådløse on-ear hovedtelefoner med aktiv støjreduktion. De kan foldes fladt sammen og er lette og kompakte – perfekt til hverdagsbrug. JBL TUNE600BTNC har 32 mm JBL-enheder, der gør det muligt at levere JBL Pure Bass-lyd. Lyden kan nydes trådløst uden unødvendig støj i over 12 timer, og en fuld genopladning tager kun 2 timer. Og takket være det medfølgende aftagelige kabel kan du lytte til musik, så længe du vil med kablet tilsluttet – med eller uden aktiv støjreduktion. JBL TUNE600BTNC er fremstillet af robuste materialer og designet i fire friske farver. Du kan hurtigt oprette forbindelse til din verden med knapperne på ørekopperne, som gør det nemt at foretage opkald og afspille musik håndfrit.
FAQs & How-Tos
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
Yes, you can activate the noise reduction circuits alone, with no connection to a source device by Bluetooth or cable. The headphones will stay on as long as there is power in the battery, which is close to 30 hours for pure NC function. Please note that there is a slight residual noise from the NC system, which will be drowned out by music playing, or by surrounding noise such as airplane noise. If you use the NC in surroundings that are near quiet to begin with, you may not get an improvement in noise level.Was this helpful? Thank you for your feedback!
-
Yes. The 600BTNC features an audio cable that you can use if you do not wish to use the headphones via wirelessly.Was this helpful? Thank you for your feedback!
-
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
In order to reset the headphones:
Long Press of volume + and volume - at the same time while the unit is on. Make sure that bluetooth is NOT on and connected to any device.
When reseting, LED will blink faster.Was this helpful? Thank you for your feedback! -
Yes, but only via cable, and noise cancelling cannot be activated meanwhile. Since the charging socket is located on top of the ear pod, adjustment is limited in that direction while the micro-USB plug is inserted.Was this helpful? Thank you for your feedback!
-
No. The 600BTNC headphone does not feature any IPX rating that protects it against sweat or water. Over exposure to water can compromise the controls on the headphones.Was this helpful? Thank you for your feedback!
-
This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00