JBL Tune 510BT
Trådløse on-ear hovedtelefoner
Sold from 2021 until now
Getting started with your JBL Tune 510BT
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Enheds-størrelser (mm)
- 32
- Number of Microphones
- 1
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 103.5
- Dynamisk frekvensområde (Hz)
- 20 Hz – 20 kHz
- Impedans (ohm)
- 32
- Dybde (cm)
- 1.7
- Ear Cup Depth (in)
- 0.7
- Højde (cm)
- 7.3
- Ear Cup External Height (in)
- 2.9
- Bredde (cm)
- 7.3
- Ear Cup External Width (in)
- 2.9
- Indre bredde (cm)
- 3.2
- Ear Cup Internal Height (in)
- 1.3
- Indre højde (cm)
- 3.2
- Ear Cup Internal Width (in)
- 1.3
- Hovedtelefonernes kabel-længde (m)
- 0.2
- Headphone Cable Length (ft)
- 0.7
- Vægt (g)
- 160
- Vægt (oz)
- 5.6
- Bluetooth-profiler
- A2DP v1.3, AVRCP v1.6, HFP v1.7
- Bluetooth-frekvens
- 2.4 GHz – 2.4835 GHz
- Bluetooth sender-modulation
- GFSK, _x001E_/4DQPSK,8DPSK
- Bluetooth sender-effekt
- <8 dBm
- Bluetooth-version
- 5.0
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid (timer)
- 40
- Bluetooth
- Ja
- Sammenklappelig
- Ja
- Multi-point Connection
- Ja
- Remote control on ear cups
- Ja
- Stemmeassistent
- Ja
- Indbygget mikrofon
- Ja
- Håndfri opkald
- Ja
- JBL Pure Bass-lyd
- Ja
- On-ear
- Ja
- Genopladeligt batteri
- Ja
- Trådløse
- Ja
Stærk bas, dagen lang.
JBL Tune 510BT hovedtelefonerne giver dig den kraftfulde JBL Pure Bass-lyd - helt uden kabler. Disse hovedtelefoner er nemme at bruge og leverer op til 40 timers ren fornøjelse med 2 timers ekstra batteritid efter bare 5 minutters opladning med USB-C-kablet. Og hvis du modtager et opkald, mens du ser video på en anden enhed, skifter JBL Tune 510BT problemfrit til din mobil. JBL Tune 510BT hovedtelefonerne har et komfortabelt design og er udstyret med Bluetooth 5.0. Du kan bruge Siri eller Google Now uden at røre din mobiltelefon. JBL Tune 510BT hovedtelefonerne fås i flere friske farver og kan foldes sammen for nem transport. Her får du en fiks løsning på farten, så musikken kan følge dig overalt gennem din travle hverdag.
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
