JBL Tune 750BTNC
Trådløse over-ear hovedtelefoner med aktiv støjreduktion
Sold from 2019 until now
Getting started with your JBL Tune 750BTNC
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Weight (g)
- 220.3
- Enheds-størrelser (mm)
- 40
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 95dBSPL/1mw
- Dynamisk frekvensområde (Hz)
- 20Hz - 20KHz
- Impedans (ohm)
- 32
- Vægt (g)
- 220
- Vægt (oz)
- 7.76
- Bluetooth-profiler
- A2DP v1.2, AVRCP v1.5,HFP v1.6, HSP v1.2
- Bluetooth-frekvens
- 2.402GHz-2.48GHz
- Bluetooth sender-modulation
- GFSK, /4DQPSK, 8DPSK
- Bluetooth sender-effekt
- <4dbm
- Bluetooth-version
- 4.2
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 22
- Maksimal spilletid med aktiv støjreduktion (timer)
- 15
- Maksimal spilletid (timer)
- 30
- Audio cable
- Ja
- Bluetooth
- Ja
- Charging cable
- Ja
- Sammenklappelig
- Ja
- Stemmeassistent
- Ja
- Aktiv støjreduktion
- Ja
- Aftageligt kabel
- Ja
- Håndfri opkald
- Ja
- JBL Pure Bass-lyd
- Ja
- Flerpunktsforbindelse
- Ja
- Over-ear
- Ja
- Genopladeligt batteri
- Ja
- Trådløse
- Ja
Din musik, uden støj
De trådløse JBL TUNE 750BTNC hovedtelefoner er udstyret med kraftfuld JBL Pure Bass-lyd og aktiv støjreduktion, som giver hårdtslående bas og en medrivende lydoplevelse. Det lette over-ear-design giver optimal komfort og lydkvalitet, og hovedtelefonerne kan let foldes sammen, så de ikke fylder på farten. Med 15 timers batteritid og genopladning på blot 2 timer får du lang tids trådløs og støjfri afspilning. Med multipunkt-forbindelsen kan du oprette forbindelse til to Bluetooth®-enheder samtidig, så du ikke mister et opkald på din telefon, mens du streamer videoer på din tablet. Hold musikken kørende, så længe det skal være, med det medfølgende, aftagelige lydkabel, som forlænger støjreduktionen helt op til 30 timer. JBL TUNE 750BTNC fås i flere farver, som matcher din personlige stil.
Tune ind på din musik. Fjern støjen.
I mere end 70 år har JBL konstrueret den præcise og imponerende lyd, der findes på de store spillesteder rundt om i verden. Disse hovedtelefoner gengiver den samme JBL-lyd med en hårdtslående bas, der er både dyb og kraftfuld.
Med knapperne på ørekoppen kan du let kontrollere din lyd, håndtere opkald og aktivere din taleassistent.
Nyd din musik trådløst og med aktiv støjreduktion i 15 timer. Genoplad batteriet på kun 2 timer.
Gør det let at skifte fra én Bluetooth®-enhed til en anden. Du kan let skifte fra en video på din tablet til et opkald på din mobiltelefon, så du aldrig går glip af et opkald.
Du kan afspille lyd i høj kvalitet fra dine Bluetooth®-enheder - uden at bøvle med ledninger.
Takket være et let, kompakt og foldbart design er disse hovedtelefoner altid klar til at tage med, uanset hvor du skal hen.
FAQs & How-Tos
6 results
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
This product features Multi-Point Connection which allows you to be connect to two devices at the same time. Effortlessly switch from listening to music on your portable device to a call from your phone.
To connect to two devices at the same time:
1. Power on your product.
2. Make sure that the device you wish to connect to has the BT settings on and within range.
3. If this is the first time connecting your product, you will notice a flashing LED to indicate that it is searching for a device to connect to. (If this is not your first time, your product will automatically reconnect to the last device it was connected to)
4. Under your BT settings, go to discoverable devices and the product name should pop up within a few seconds. Depending on the device you are using, you may have to tap on the product to complete the connection.
5.Now that you are connected to the first device, push the BT button on the product to connect to the second device. The product should start searching for the second device by displaying a flashing LED.
6. Go to your BT settings on your second device. The product should pop up on your discoverable devices should pop up within a few moments.
(Please Note: If the product does not show up on your discoverable devices while it is in pairing mode, quickly turn off your BT settings and turn it back on. This will typically result in resetting the BT search in which your product should pop up on discoverable devices within a few moments)
Was this helpful? Thank you for your feedback! -
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1Was this helpful? Thank you for your feedback! -
This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
