AVR 171
700-watt, 7.2-kanals AVR-enhed med netværk og med AirPlay og Bluetooth-tilslutningsmulighed
Getting started with your AVR 171
Documents & Downloads
Højeffektiv audio/video-receiver, som kan prale af mange forskellige trådløse tilslutningsmuligheder, seks HDMI-indgange og 700 watt smuk lyd. Styrke, ydeevne og flere tilslutningsmuligheder, end du nogensinde får brug for: Vi præsenterer Harman Kardon® AVR 171 med netværk, som er svaret på enhver underholdningsentusiasts ønske om ydeevne og alsidighed. Den har styrke: op til 700 watt (100 watt pr. kanal). Dens 7.2-kanals A/V-receiver er udstyret med HARMAN TrueStream Bluetooth®-tilslutningsmulighed, Apple AirPlay, vTuner™-internetradio og DLNA® 1.5-teknologi, så du har mange forskellige muligheder for at streame lyd. Og med seks 3D-ready HDMI®-indgange, herunder en der er udstyret med MHL til tilslutning af mobile enheder, og to HDMI-udgange har du rigeligt med muligheder for at tilslutte alt, hvad du elsker – film, HDTV, sportsudsendelser, MHL-udstyrede enheder og Roku Streaming Stick™-donglen. Mens AVR 171-enhedens tilslutningsmuligheder alene gør den attraktiv, vækker lyden virkelig genklang. Det er den første Harman Kardon AVR-enhed, der har vores eksklusive Natural Sound Processing (NSP), som skaber en kraftig og omsluttende surroundsoundlyd fra en hvilken som helst kilde – især med 2-kanals streamingindhold. Og dens EzSet/EQ™ III-system kalibrerer automatisk AVR-enheden til dine højttalere og dit lyttemiljø. AVR 171 er også let, takket være HARMAN GreenEdge™-certificeringen – og leverer al den styrke, du skal bruge, med lav miljøpåvirkning. For dem, der vil have det hele, kan AVR 171 ikke overgås.
FAQs & How-Tos
-
Yes, this is correct. The AVR 1x1S does not support OSD on HDMI 2 out, only on HDMI 1. If customers want OSD on two HDMI outputs, they can buy the AVR 370.Was this helpful? Thank you for your feedback!
-
Yes, this is correct. The AVR171, 171S, 1710 & 1710S only supports OSD on on the HDMI 1 output. HDMI 2 doesn't not show the OSD. The AVR370 and 3700 supports OSD on both HDMI outputs.Was this helpful? Thank you for your feedback!
-
Yes, in the HDMI Setup Menu, it is possible to select either �Sound To TV� or �Sound To Amp�, Amp being the AVR. This detail is not mentioned in the owner's manual.Was this helpful? Thank you for your feedback!
-
Yes, download the Harman Kardon Remote app to do this.Was this helpful? Thank you for your feedback!
-
The two subwoofer outputs are parallel, meaning that when changing subwoofer settings in the setup menu, both outputs will be adjusted. Establish the 7.2 system simply by adding a second subwoofer to an existing 7.1 system, connecting it to sub output 2.Was this helpful? Thank you for your feedback!
-
This is sometimes a problem with wired connections to computers or NAS drives. There is no way to change this, unfortunately.Was this helpful? Thank you for your feedback!
-
The Harman AVR App controls your receiver through your smartphone, which communicates via your wireless home network. Please make sure that your AVR is properly connected to your network router, with cable for the smaller models. If you have no wireless home network, you cannot use the app.Was this helpful? Thank you for your feedback!
-
Yes, on your computer, enter the IP address of the receiver in the internet browser. In the page that opens, it is possible to change the name.Was this helpful? Thank you for your feedback!
-
For your personal safety and to avoid possible damage to your equipment and speakers, it is always a good practice to turn off and unplug the AVR and ALL source equipment from the AC output before making any audio or video system connections.Was this helpful? Thank you for your feedback!
-
There are five possible reasons for the receiver shutting down. 1. There is a problem internally with the receiver. 2. There is a problem with one or more of your speakers. 3. There is a problem with one or more of your speaker wires. 4. There is a problem with the speaker wiring done on your system. 5. The unit is overheating. No ventilation. First, check the wiring at every speaker terminal at the back of your receiver and at the back of your speakers. A single strand of speaker wire crossing from one terminal to another would be enough to cause the amp to shut down or go into PROTECT. If you do not find any problems with any of the wiring, you should disconnect all speakers from your receiver. If the receiver continues to go into PROTECT, the problem is in the receiver. Please submit a case on the Contact Us page. They will be able to assist you. However, if it turns on, the problem is elsewhere. Begin reconnecting one speaker at a time. Eventually you will connect a speaker that will cause the receiver to shut down. At this point you have found your culprit. On the other hand, it may just be overheating. You must have at least 2 - 3 inches of space between the top of the unit and any shelf or component above the unit. The unit should not be inside a sealed compartment when being used. The unit must be able to breath. There are very powerful amps in these receivers. If they run too hot, they will shut down. An external fan can help this.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00