Support Overview / Home Audio / Receivers / Receivere - Stereo / HK 3370

HK 3370

Stereo Receiver (70 watts x 2)

Sold from 2000 until 2002

Predecessor Product:	HK 3270
Successor Product:	HK 3375
Made in:	Korea

Documents & Downloads

Manuals

Other

Produktbrochurer (Engelsk) 138.34 KB

Specifications

Specifikationer

Power Requirements: AC 120V/60Hz

Power Consumption: 72 Watts idle, 332 Watts maximum (both channels driven)

MSRP U.S.: $349.95 each

Lydspecifikationer

Continuous Average Power (FTC) per Channel (stereo mode): 70 Watts per channel, 20Hz – 20kHz @ <0.07% THD, both channels driven into 8 ohms

Continuous Average Power (FTC) per Channel (stereo mode): 95 Watts per channel, 20Hz – 20kHz @ <0.2% THD, both channels driven into 4 ohms

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 95dB (IHF-A)

Frequency Response: 10Hz – 110kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM): Unmeasurable

Rise Time: 16 µsec

Slew Rate: 40V/µsec

Mål

Width: 17.4 inch (442mm)

Height: 6.1 inch (156mm)

Depth: 16.3 inch (415mm)

Weight: 24.6 lb (11.2kg)

Dimensions (H x W x D): 6.1 inch x 17.4 inch x 16.3 inch (156mm x 442mm x 415mm)

Tuner Specifications

Frequency Range: AM... 520 – 1710kHz

Frequency Range: FM... 87.5 – 108MHz

Signal-to-Noise Ratio: AM... >40dB

Usable Sensitivity: FM... IHF 1.12 µV/13.5dBf

Signal-to-Noise Ratio: FM... 73/72dB (Mono/Stereo)

Usable Sensitivity: AM... Loop 500µV/M

Distortion: AM... 1kHz, 50% Mod 0.8%

Distortion (Mono/Stereo): FM... 0.3%/0.4%

Selectivity: AM... ± 10kHz, >25dB

Stereo Separation: FM... 40dB @ 1kHz

Selectivity: FM... ± 400kHz, 65dB

Image Rejection: FM... >80dB

IF Rejection: FM... >100dB

Tuner Output Level: FM... 1kHz, ±100kHz Dev 500mV

Amplifier Specifications

High Instantaneous Current Capability (HCC): ± 42 Amps

The HK 3370 carries on the Harman Kardon tradition of excellence in the delivery of two-channel audio reproduction. Thoughtful touches, such as preamp-out/main-in connections, a subwoofer output, phono inputs, a tape monitor loop, A/B speaker switching, a headphone jack, and a subwoofer output make the HK 3370 a versatile performer in any room. Its high-current capability (± 42 Amps) enables it to handle even the most demanding loads with ease.