AVR 151S
375 watt netværksparat lyd-/videoreceiver med 5.1 kanaler
Getting started with your AVR 151S
Documents & Downloads
Specifications
- Power Requirement
- 220V - 240V AC, 50Hz/60Hz
- Dimensions (H x W x D – Metric/English)
- 121mm x 440mm x 300mm (4-3/4” x 17-5/16” x 11-13/16”)
- Weight (Metric/English)
- 4.6kg (10 lb)
- Stereo Power
- 75W per channel, two channels driven @ 6/8 ohms, 1kHz
- Multichannel Power(all channels driven)
- 75W per channel, two channels driven @ 6/8 ohms, 1kHz
- High Instantaneous Current Capability
- 25 Amps
- Signal-to-noise Ratio (IHF-A)
- 75 dB
- Slew Rate
- 40V/sec
- Television Format
- PAL
- Input Level/Impedance
- 1Vp-p/75 ohms
- Output Level/Impedance
- 1Vp-p/75 ohms
- Video Frequency Response (Composite/S-Video)
- 10Hz – 8MHz (–3dB)
- HDMI Version
- 2.0 + 3D ready
Denne højtydende A/V-receiver med 375 watt og 5.1 kanaler får musik, film og tv-programmer til at lyde bedre end nogensinde. Uanset om du bruger din Blu-ray™-afspiller, HD-kabel-boks eller spillekonsol, forventer du lyd og billede i optimal kvalitet - med et minimum af besvær. Harman Kardon®AVR 151S er en netværksparat lyd-/videoreceiver med 5.1 kanaler samt fire 3D-forberedte HDMI®-indgange. Tilslutningen klares én gang for alle – og så er du klar. Med indbygget Spotify Connect kan du afspile musik direkte fra din Spotify-betalingskonto via din telefon, tablet eller computer på samme netværk, og den indbyggede vTuner™-internetradio åbner en helt ny verden af underholdning på nettet. Den alsidige og muskuløse AVR 151S leverer op til 375 watt kraftfuld lyd med al den klarhed, du forventer fra Harman Kardon. Samtidig er receiveren usædvanlig let takket være HARMAN GreenEdge™-certificeringen. Glæd dig til masser af kræfter – nu i en miljøvenlig form. Hvis du ønsker endnu mere kontrol, kan du hente Harman Kardons Remote-app. Så får du friheden til at styre hele din hjemmebiograf fra din mobil eller tablet. Den slanke, lette og kraftfulde Harman Kardon AVR 151S rammer den optimale balance mellem alsidig funktionalitet og smuk lyd.
FAQs & How-Tos
-
No, 4K upscaling is not possible. It was mentioned in the specification sheet and on the web page that this feature was supported, but that is an error.Was this helpful? Thank you for your feedback!
-
Yes, in the HDMI Setup Menu, it is possible to select either �Sound To TV� or �Sound To Amp�, Amp being the AVR. This detail is not mentioned in the owner's manual.Was this helpful? Thank you for your feedback!
-
We designed the USB folder data to show the latest modified folder and it is a design preference. It is not possible to change this setting.Was this helpful? Thank you for your feedback!
-
This is sometimes a problem with wired connections to computers or NAS drives. There is no way to change this, unfortunately.Was this helpful? Thank you for your feedback!
-
Typically when we are talking about projectors, they are normally installed in a place where the HDMI cable is too long, and the signal has a hard time reaching the AVR. It is also possible that the projector is not compatible with the AVR. To be sure it works with the AVR, please move projector closer and use a short HDMI cable. We recommend a cable that is 3 meters in length or less. If the projector works with the shorter cable, and you have no choice but to use a longer cable, you will need an HDMI repeater/amplifier/eq/booster (name varies depending on the manufacturer), to boost the signal so that it can make it all the way from the AVR to the projector.Was this helpful? Thank you for your feedback!
-
The Harman AVR App controls your receiver through your smartphone, which communicates via your wireless home network. Please make sure that your AVR is properly connected to your network router, with cable for the smaller models. If you have no wireless home network, you cannot use the app.Was this helpful? Thank you for your feedback!
-
Yes, on your computer, enter the IP address of the receiver in the internet browser. In the page that opens, it is possible to change the name.Was this helpful? Thank you for your feedback!
-
No, in order to go through the setup procedure, it is necessary to activate the (OSD) On-Screen-Display, and this is not possible on the front panel buttons, you need the remote control. Only the remote control features the necessary OSD button.Was this helpful? Thank you for your feedback!
-
For your personal safety and to avoid possible damage to your equipment and speakers, it is always a good practice to turn off and unplug the AVR and ALL source equipment from the AC output before making any audio or video system connections.Was this helpful? Thank you for your feedback!
-
Yes, our AVR's have ARC (Audio Return Channel) on one of our HDMI ports (Labeled ARC). ARC will process both video and audio coming from your TV into the AVR and back, and if you have another source like BlueRay player in one of the other HDMI ports. It will transfer video and audio via the ARC port to your TV.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00