Documents & Downloads
Specifications
- Multichannel Power (all channels driven)
- 70W per channel, two channels driven @ 8 ohms, 1kHz, less than 0.9% THD
- Transient intermodulation distortion (TIM):
- Unmeasurable
- Power Consumption (full power/idle)
- less than 0.5W (standby); 280W maximum
- MSRP U.S.
- $479.95 each
- Output Level/Impedence (ohm)
- 1Vp-p/75 ohms
- Selectivity (±400kHz):
- 70dB
- Input Level/Impedence (ohm)
- 1Vp-p/75 ohms
- High Instantaneous Current Capability
- ±25 amps
- Stereo Separation @ 1kHz (dB)
- 40dB @ 1kHz
- Surround system adjacent-channel separation:
- Dolby Pro Logic/PLII
- Usable Sensitivity (Loop)
- 500µV
- Signal-to-noise Ratio (IHF-A) (dB)
- 100dB
- Distortion (1kHz, 50% mod):
- 0.80%
- Input Sensitivity/Impedence
- 200mV/47k ohms
- Slew Rate
- 40V/sec
- Signal-to-Noise Ratio (Mono/Stereo dB)
- 70dB/68dB
- Selectivity (±10kHz):
- 30dB
- Distortion (Mono/Stereo)
- 0.2%/0.3%
- Signal-to-Noise Ratio (dB)
- 45dB
- Usable Sensitivity (IHF)
- 1.3µV/13.2dBf
- Frequency Response
- 10Hz – 130kHz (+0dB/–3dB)
- Frequency Range (kHz)
- 520 – 1720kHz
- Frequency Range (MHz)
- 87.5 – 108.0MHz
- Stereo Power
- 70W per channel, two channels driven @ 8 ohms, 1kHz, less than 0.9% THD
- Depth (in)
- 17-1/8
- Height (in)
- 6-1/2
- Height (mm)
- 165
- Depth (mm)
- 435
- Width (in)
- 17-5/16
- Width (mm)
- 440
- Weight(kg)
- 20
- Weight
- 20 lb (9.1kg)
- IF Rejection (dB)
- 90dB
- Image Rejection (dB)
- 80dB
- Video Frequency Response (Component Video)
- 10Hz – 8MHz (–3dB)
- Television Format
- NTSC
- Input Level/Impedance
- 1Vp-p/75 ohms
- Power Requirement
- 120V AC/60Hz
An entry-level, 5.1-channel A/V receiver with HDMI 3D plus Dolby, DTS and Logic 7 surround sound.
Take your home entertainment to the next level. As a multitalented A/V receiver for budget-conscious film lovers and audiophiles, the Harman Kardon® AVR 1565 has an impressive list of features designed to take your home entertainment to the next level. Thanks to HDMI® v.1.4a with 3-D and Deep Color, this versatile receiver brings a multidimensional TV viewing experience to your living room – while on the sound front, the AVR 1565 has all the latest Dolby® TrueHD and DTS-HD Master Audio™ decoding technology and Harman Kardon Logic 7® processing, which creates an exhilarating 5.1-channel, 360-degree soundstage for your movies, TV shows and games.
The AVR 1565 high-performance receiver delivers 70 watts per channel with the ability to power a full 5.1-channel surround-sound system. A high-current capability (HCC), ultrawide-bandwidth amplifier design ensures accurate, dynamic sound with enhanced clarity and realism, even at the highest listening levels. You can also connect the AVR 1565 to a powered subwoofer to generate additional low-frequency excitement.
Three HDMI inputs with 3D and 30/36-bit Deep Color deliver high-definition digital video at resolutions up to 1080p with full-fidelity audio through a single cable. There is no loss of video or audio quality because of format conversion, just full-impact Hollywood excitement as its creators meant you to experience it.
The AVR 1565 delivers high-resolution audio to match the digital video of Blu-ray Disc formats, unlocking the full potential of movie soundtracks formatted with Dolby TrueHD and DTS-HD Master Audio coding. No matter what mode or mood you are in, you’ll always hear playback at its finest.
HARMAN Logic 7 technology transforms a stereo input into full 5.1-channel surround sound, courtesy of proprietary algorithms that make any audio source – HDMI, analog, component, composite or computer-based audio from a USB connection – truly spectacular. The result is optimal quality and a superior, enveloping experience that engulfs you in a 360-degree soundscape.
Three HDMI input ports let you digitally interconnect your entire system for maximum audio/video performance. HDMI-format ports dramatically reduce connection confusion while ensuring the greatest chance for compatibility with whatever audio/video equipment you are planning to connect.
In addition to three HDMI digital ports, the AVR 1565 features one component and three composite video inputs that connect directly to legacy video sources. The receiver even transcodes component video to the HDMI interface with a single connection to your TV. In this way, it is easier than ever before to receive a high-definition signal from whatever video sources you select, including Blu-ray Disc, DVD and portable-music players.
The AVR 1565’s FM section features an 87.5MHz – 108.0MHz frequency range, while the AM section handles frequencies from 520kHz to 1720kHz. Thirty station presets let you return to your favorite stations with a simple press of a button.
By accepting banana plugs, spade connectors, pin connectors or bare wire, the AVR 1565’s binding-post connectors provide secure links for your speaker cables. Color-coding of these connectors reduces errors while you’re hooking up your speakers to the appropriate channel amplifiers.
While its cutting-edge features are impressively advanced and sophisticated, the AVR 1565’s easy-to-navigate on-screen menus make the receiver simple to set up and use – even for novices. And during day-to-day use, the receiver’s built-in dot-matrix display confirms your current selection choice and other functions.
The AVR 1565 simplifies your life with a programmable infrared (IR) remote control. Its ergonomic design works seamlessly with the receiver’s multilingual on-screen display, guiding you through the system-setup process with consummate ease. The multidevice remote can also control your TV, cable boxes, satellite tuners and all other playback sources.
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
